SECO-LARM ENFORCER VA-2101B-WQ User manual

ENFORCER Video Amplifiers
SECO
-
LARM U.S.A., Inc.
Video
a
mplifier does not
function correctly:
•
Make sure the power, input, and output cables are connected
firmly to the amplifier.
•Make sure the video input device is turned on.
•Make sure the video output device is turned on.
•Test the coaxial cable between the video input and the
amplifier to make sure it is functional.
•Test the coaxial cable between the video output and the
amplifier to make sure it is functional.
Power L D indicator not lit:
•
Make sure power is connected to the amplifier.
Troubleshooting:
Also Available from
SECO
-
LARM
:
Passive VGA Balun
Passive Video Balun
BNC
-
to
-
VGA Converter
MVE
-
SV010Q
EB
-
P501
-
01Q
V
-
1BAQ
SECO
-
LARM
®
has a complete line of security products.
Please visit www.seco-larm.com for more information.
WARRANTY
:
This S CO
-
LARM product is warranted against defects in material and workmanship while used in normal
service for a period of one (1) year from the date of sale to the original consumer customer. S CO-LARM’s obligation is
limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to S CO-LARM. This
Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair, or
alteration, improper or abnormal usage, or faulty installation, or if for any other reason S CO-LARM determines that such
equipment is not operating properly as a result of causes other than defects in material and workmanship. The sole obligation
of S CO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only, at S CO-LARM’s
option. In no event shall S CO-LARM be liable for any special, collateral, incidental, or consequential personal or property
damages of any kind to the purchaser or anyone else.
NOTI E:
The information and specifications printed in this manual are current at the time of publication. However, the
S CO-LARM policy is one of continual development and improvement. For this reason, S CO-LARM reserves the right to
change specifications without notice. S CO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2013 S CO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or in
part, without the written permission of S CO-LARM.
SECO
-
LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine Ca 92606
Tel: [phone]
Fax: [phone]
Website: www.seco-larm.com
Email: [email protected]
PITSW4
MiVA-2xxxB-xQ_1307.docx
Manual
Video Amplifiers
•
Compatible with both color and
B/W signals
•Transmission distance up to
3,280ft (1,000m)
•Connect to a video camera,
multiplexer, DVR, etc.
•
Gold-plated BNC connectors
•Sharpness and brightness
adjustments for each channel
•12VDC Power adapter included
•Pass-through circuit: Power output
can power nearby devices
NOT : Products with model numbers that end with “Q” or products that have a round green “Q” sticker signify RoHS compliance.
VA
-
2101B
-
W
Q
VA-2101B-WAQ*
1-In, 1-Out
VA
-
2404B
-
WQ
VA-2404B-WAQ*
4-In, 4-Out
*
VA-2101B-WAQ and VA-2404B-WAQ do not include a power adapter.

ENFORCER Video Amplifiers
SECO
-
LARM U.S.A., Inc.
NFORC R Video Amplifiers are the idea way to boost the strength of video signals. Using the
included 12VDC power adapter, video signals are amplified for transmission distances of up to
3,280ft (1,000m). Brightness and sharpness adjustments can be made independently for each
channel to provide fine-tuning of video signals.
Introduction:
Specifications:
Dimensions:
Overview:
Power input
Sharpness
control knobs
Power loop out
Brightness
control knobs
Video input
Video output
Power L D
4
1
/
8
”
(104mm)
1
3
/
8
”
(35mm)
4
15
/
16
”
(125mm)
4
15
/
16
”
(125mm)
VA
-
2101B
-
WQ
VA-2101B-WAQ
VA
-
2
4
0
4
B
-
WQ
VA-2404B-WAQ
VA
-
2101B
-
WQ
VA
-
2101B
-
WA
Q
VA
-
2404B
-
WQ
VA
-
2404B
-
WA
Q
Number of inputs
1
4
Number of outputs
1
4
Maximum range
3,280’ (1,000m)
Video input level
0.8~1.2
Vp
-
p, 75
Ω
Video output level
1
Vp
-
p, 75
Ω
Video bandwidth
10
H
z
~
10MHz
Power supply
(12VDC)
I
ncluded
Not included
Included
Not
included
Current consumption
100mA
220mA
Dimensions
4
15
/
16
" x 4
1
/
8
" x 1
3
/
8
" (12
5
x 104 x 35 mm)
Weight
4.1 oz (116g)
6.3 oz. (179g)
ENFORCER Video Amplifiers
SECO
-
LARM U.S.A., Inc.
1.
Mount and install the amplifier where the video inputs and outputs can be easily accessed.
2. Connect the video output of each camera to the female BNC input connector(s) on the amplifier.
3. Connect coax cable from the female output BNC connector(s) to the DVR or display.
4. Connect power to the distributor with the included 12VDC power adapter.
5. Turn on power to the video input and the video output units the amplifier is connected to.
Installation:
Sample Application ( VA-2404B-WQ / VA-2404B-WAQ ):
Sample Application ( VA-2101B-WQ / VA-2101B-WAQ ):
Note: Total distance between the camera and DVR/monitor should not exceed 3,280ft
(1,000m).
ENFORCER
Bullet Camera
ENFORCER
Dome Camera
Elite
3X
Dome Camera
Elite
3X
Bullet Camera
12VDC Power supply
Monitor
Monitor
ENFORCER
Bullet Camera
NFORC R
Video Amplifiers have sharpness and
brightness adjustments for each channel. Turn the
knobs with a small screwdriver clockwise to increase
sharpness or brightness values, or counterclockwise
to decrease them.
Brightness and Sharpness
Adjustments:
Power Loop Out:
NFORC R
Video Amplifiers have
the
ability to power other 12VDC devices.
Connect other devices to the power loop
out terminal blocks.
NOTE: The current draw of the video
amplifiers will lower the amount of
voltage present at the power loop out.
To ensure proper operation of the
connected devices, first check the
voltage present at the terminal blocks.
DVR
Max range between camera and
DVR/monitor: 3,280ft (1,000m)
Max range between camera and
monitor: 3,280ft (1,000m)
Brightness
Sharpness
1
2
3
4
12VDC Power supply