Seconique BERLIN 400-401-185 User manual

BERLIN DINING TABLE
ASSEMBLY INSTRUCTIONS
SEC/SH/04/21/SF1
PLEASE READ BEFORE YOU CONTINUE FURTHER
THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY YEARS OF
SERVICE IF YOU FOLLOW THE GUIDELINES FOR ITS SAFE ASSEMBLY AND
PERIODIC MAINTENANCE AND CLEANING .
ASSEMBLE ON A SOFT CLEAN SURFACE
DO NOT USE ANY TOOLS OTHER THAN THOSE SHOWN.
ANY SPANNERS OR ALLEN KEYS REQUIRED ARE INCLUDED WITH THE
FITTINGS KIT.
DO NOT FOR ANY REASON USE A POWER TOOL TO ASSEMBLE THIS
PRODUCT. ITS USE WILL INVALIDATE ANY CLAIM YOU MAY HAVE AND COULD
MAKE THIS PRODUCT UNSAFE.
DEPENDING ON THE AMOUNT OF USE THIS PRODUCT RECEIVES IT MAY
BE NECESSARY TO TIGHTEN UP THE FIXINGS FROM TIME TO TIME . THIS IS
COMPLETELY NORMAL FOR ANY FLAT PACK FURNITURE.
DO NOT OVERTIGHTEN FIXINGS.
FOR CLEANING, YOU MAY USE A DAMP CLOTH (NOT WET) DO NOT USE POLISH,
DETERGENT OR CHEMICAL CLEANERS.
THIS PRODUCT MAY STAIN OR MARK IF ALLOWED TO COME INTO CONTACT WITH WET OR
DAMP OBJECTS.
THE SURFACE OF THIS ITEM IS NOT HEAT RESISTANT. ALWAYS USE A
PLACE MAT UNDER HOT OR COLD ITEMS TO PREVENT MARKING.
FOR DOMESTIC USE ONLY
IMPORTANT

HARDWARE LIST
123
SEC/SH/04/21/SF1
Page 02
PARTS LIST
A
B
C
D
16PCS
6PC
16PC
1PC
Bolts M8x16mm
Bolts M6x25mm
Allen Key
Metal Washer
HARDWARE NAME QTY
REF
BEFORE YOU START ASSEMBLING.IF YOU DO FIND THAT
PLEASE CHECK THAT YOU HAVE ALL THE PARTS LISTED
PLEASE CONTACT YOUR SUPPLIER IMMEDLATELY.
SOMETHING IS MISSING.DO NOT CONTINUE ASSEMBLY.
Part Code
Part Number Part Description Quantity Carton
1
2
3
S400-403-050-SF1-01 Table Top 11/2
Support Bar
Table Leg
S400-403-050-SF1-02
S400-403-050-SF1-03
2
4
1/2
2/2

STEP 1
STEP 2
SEC/SH/04/21/SF1
Page 03
1 - x1
TABLE TOP
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
B06
2 - x2
SUPPORT BAR
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
A16
M6x25mm M8x16mm
M6x25mmM8x16mm
1 - x1
TABLE TOP
3 - x4
TABLE LEG
C16
C
A
D
D
B
1
2
1
3

BERLIN DINING CHAIR
ASSEMBLY INSTRUCTIONS
Page 01
PLEASE READ BEFORE YOU CONTINUE FURTHER
THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY YEARS OF
SERVICE IF YOU FOLLOW THE GUIDELINES FOR ITS SAFE ASSEMBLY AND
PERIODIC MAINTENANCE AND CLEANING .
ASSEMBLE ON A SOFT CLEAN SURFACE
DO NOT USE ANY TOOLS OTHER THAN THOSE SHOWN.
ANY SPANNERS OR ALLEN KEYS REQUIRED ARE INCLUDED WITH THE
FITTINGS KIT.
DO NOT FOR ANY REASON USE A POWER TOOL TO ASSEMBLE THIS
PRODUCT. ITS USE WILL INVALIDATE ANY CLAIM YOU MAY HAVE AND COULD
MAKE THIS PRODUCT UNSAFE.
DEPENDING ON THE AMOUNT OF USE THIS PRODUCT RECEIVES IT MAY
BE NECESSARY TO TIGHTEN UP THE FIXINGS FROM TIME TO TIME . THIS IS
COMPLETELY NORMAL FOR ANY FLAT PACK FURNITURE.
DO NOT OVERTIGHTEN FIXINGS.
FOR CLEANING, YOU MAY USE A DAMP CLOTH (NOT WET) DO NOT USE POLISH,
DETERGENT OR CHEMICAL CLEANERS.
THIS PRODUCT MAY STAIN OR MARK IF ALLOWED TO COME INTO CONTACT WITH WET OR
DAMP OBJECTS.
THE SURFACE OF THIS ITEM IS NOT HEAT RESISTANT. ALWAYS USE A
PLACE MAT UNDER HOT OR COLD ITEMS TO PREVENT MARKING.
FOR DOMESTIC USE ONLY
IMPORTANT
SEC/SH/04/21/SF1

QTY
8 PCS
1 PC
4 PCS
4 PCS
A
B
D
CM6x16
M5
REF PART NAME
HARDWARE LIST
1
4
SEC/SH/03/21/SF1
Page 02
PARTS LIST
BEFORE YOU START ASSEMBLING.IF YOU DO FIND THAT
PLEASE CHECK THAT YOU HAVE ALL THE PARTS LISTED
PLEASE CONTACT YOUR SUPPLIER IMMEDLATELY.
SOMETHING IS MISSING.DO NOT CONTINUE ASSEMBLY.
23
Part Code
Part Number Part Description Quantity Carton
1
2
3
4
S400-402-107-SF1-01 Chair Seat 11/1
Chair Leg Top
Chair Leg Boom
Top Connecng Plate
S400-402-107-SF1-02
S400-402-107-SF1-03
S400-402-107-SF1-04
1
1
1
1/1
1/1
1/1
5S400-402-107-SF1-05 Boom Connecng Plate 11/1
Bolts M6x40mm
Bolts M6x50mm
Metal Washer
Allan Key
5

M6x40mm
STEP 1
STEP 2
SEC/SH/04/21/SF1
Page 03
2 - x1
CHAIR LEG TOP
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
A04
C04
3 - x1
CHAIR LEG BOTTOM
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
4 - x1
TOP CONNECTING PLATE
B04
D04
5 - x1
BOTTOM CONNECTING PLATE
FULLY TIGHTEN BOLTS
1 - x1
CHAIR SEAT
C
AD
D
A
C
4
3
5
2
M6x40mm M6x50mm
M6x50mm
DO NOT FULLY TIGHTEN BOLTS
1