SecurityMan DigiairWatch SM-816DT User manual

SM-816DT User’s Manual
2.4GHz Digital Wireless Outdoor/Indoor Camera
with Night Vision and Audio

© Copyright 2012
This manual is furnished under license and may be used or copied only in
accordance with the terms of such license. Except as permitted by such license,
no part of this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form or any means, electronic, mechanical, recording, or
otherwise, including translation to another language or format, without the
prior written permission of SecurityMan. The content of this manual is furnished
for informational use only, is subject to change without notice, and should not
be construed as a commitment by SecurityMan. SecurityMan Inc assumes no
responsibility or liability for any errors or inaccuracies that may appear in this book.
FCC Information
Notes on FCC’s “Consistent Statement of Information” This product meet the
requirements specified in Part 15 of FCC Regulation. Operation rests with the
following two conditions:
(1) The equipment should not cause any harmful interference.
(2) The equipment must receive and process any interference, including any
possible interference caused by operation mistakes.
After testing the product, we confirm that the camera complies with the provision
for class C digital equipment in the 15th part in FCC regulations; and the receiver
complies with the limitations for class B digital equipment in Part 15 of FCC
regulation. The product generates, applies and emits radio waves. It might cause
harmful interferences to wireless communication if not be installed and used
following the description of the manual.
The product may cause interference in residential area, and the customer should
take remedies to eliminate the interference on their own costs. If the product
causes any harmful interference to wireless equipment or disturbs the receiving of
TV signals (it can be identified by turning on and off the product), you can solve
the trouble by following methods:
• Readjust the product or put it in another place.
• Extend the distance between the equipment interfered and the product.
• Refer to dealers or experienced radio electrician for help.

Warranty
SecurityMan Inc warrants that this product will be free from defects in title,
materials and manufacturing workmanship for one year or otherwise specified
on the product packaging. This limited warranty shall commence from the date
of purchase. SecurityMan products warranty is not transferable and is limited
to the original purchaser. If the product is found to be defective then, as your
sole remedy and as the manufacturer’s only obligation, SecurityMan will repair
or replace the product. This warranty shall not apply to products that have been
subjected to abuse, misuse, abnormal electrical or environmental conditions,
normal wear and tear, or any condition other than what can be considered normal use.
Warranty Disclaimers
SecurityMan Inc, makes no other warranties, express, implied or otherwise,
regarding this product, and specifically disclaims any warranty for merchantability
or fitness for a particular purpose. The exclusion of implied warranties is not
permitted in some states and the exclusions specified herein may not apply to you.
This warranty provides you with specific legal rights. There may be other rights
that you have which vary from state to state.
Limitation of Liability
The liability of SecurityMan Inc, arising from this warranty and sale shall be limited
to a refund of the purchase price. In no event shall SecurityMan be liable for costs
of procurement of substitute products or services, or for any lost profits, or for any
consequential, incidental, direct or indirect damages, however caused and on any
theory of liability, arising from this warranty and sale. These limitations shall apply
not withstanding any failure of essential purpose of any limited remedy.
For Tech Support Call: 888-977-3777
SecurityMan
4601 E. Airport Drive, Ontario, CA, 91761, USA
Tel: [phone] Email: [e-mail]
Fax: [phone] Website: www.securitymaninc.com
Copyright 2012 by SecurityMan v1.0

Table of Contents
Restrictions
Conditions
Features
Package Contents
Specifications
Product Basics
Operation
Adding Camera to SM-371DR/SM-804DR
Removing Camera from SM-371DR/SM-804DR
1
3
3
4
5
5
6
6
7

1
Restrictions
Please read the following messages to make sure your working
environment is suitable.
• DO NOT place this product too close to medical equipments.
1. Radio waves might potentially cause breakdown of medical
electrical equipments and thus cause incidents.
2. Place the product at least 22cm from the heart pacemaker.
Radio wave potentially influences heart pacemaker and thus leads
to respiratory disturbance.
• DO NOT use this product to monitor equipments or activities that are
relevant to one’s privacy. Monitoring one’s private activities without
consent is illegal and this product is not designed and manufactured
for these purposes.
• DO NOT use this product to carry out any illegal activities such as
sneak preview, and etc. SecurityMan shall not be responsible for any
consequences of illegal conducts made by users.
• DO NOT put the camera in quaky paces. The camera may be unstable
or out of operation if installed improperly. Such installation may also
cause breakdown.
• DO NOT touch, shake or hold the antenna. Touching, shaking or holing
the antenna might influence the receiving of electromagnetic wave,
and thereby influence the receiving effect.
• DO NOT use the camera in complex environment, the obstruction of
stumbling block will affect the electromagnetic wave and influence
the receiving range. Wall, tree and other stumbling block might absorb,
reflect the electromagnetic wave, and influence the receiving range.

2
• DO NOT use the camera in the places which are covered with
metal. The around metal, such as elevator and cabin, might shield the
electromagnetic wave, and result in inability to receive signals.
• DO NOT put the plastic package bags in reach of children or babies. Young
children can choke on these items if they put them into their mouths.
• DO NOT plug the AC adapter into the outlet in improper situations.
• DO NOT plug in an AC adapter with wet hands might cause electric shock.
• DO NOT plug in an AC adapter unsteadily might cause fire or electric shock.
• DO NOT cover the AC adapter when it is connected to an outlet, place
the adapter near heaters, or put it on the floor which is equipped with a
heater. The above mentioned operation might cause fire or incidents.
• DO NOT use it aboard; please abide by the airway’s provision. It might
influence communication aboard and the flying apparatus if departing
from the airway’s regulation. This will result in accident, possible death
and severe physical hurt.
• DO NOT disassemble or repair the camera, receiver or other relevant
peripheral equipment s by yourself. Improper disassembly might cause
damages to the product or the peripheral equipment.

3
Conditions
Please read the following messages to make sure your working
environment is suitable.
• The temperature should be kept between –10˚C and 50˚C (14˚F to
122˚F). The relative humidity should be kept between 20% and 80%.
• Avoid putting the product in places where temperature or humidity
may change rapidly.
• Keep it dry, dustless and avoid lens exposure in direct sunlight.
• Keep product away from heat sources such as electric heaters.
• Do not use the camera near harmful chemicals.
• Do not place product near any strong magnetic objects
• It might influence the normal operation of the product if used at the
fringe range of normal temperature. Please turn off the power when
not in use.
• Do not disassemble the product.
• Do not shake or strike the product.
• Please obey the local government’s environment protection policy.
Features
• 2.4GHz digital wireless camera for DigiairWatch and DigiLCDDVR series
• Weatherproof (IP54) color camera (CMOS) for outdoor and indoor
applications
• Increased range of transmission up to 200ft between walls and up to
490ft in clear line of sight

4
Package Contents
1 x Antenna1 x SM-816DT
1 x AC Adapter 3 x Screws
1 x Mounting Bracket
User’s Manual
• No Wi-Fi interference; no interference from crowded analog 900MHz/
2.4HGz/5.8GHz/6.0GHz devices
• Digital pairing button (to match receiver or monitor)
•Up to 4 channels (Cam1, Cam2, Cam3, or Cam4) can be paired to a
receiver SM-371DR or SM-804DR
•Infrared filtered camera for best vibrant color picture
Compatible with the following SecurityMan receivers:
•SM-371DR (LCD monitor/receiver)
•SM-804DR (Receiver)

Power LED
Microphone
Pair Button
5
Specifications
Image Sensor
Resolution
View Angle
Audio
Minimum Illumination
IR LED Night Vision Range
Weatherproof Rating
Antenna
Consumption Current
Mounting Bracket
Power LED Indicator
Power Supply
Dimensions
Pairing Button
CMOS Color
640 x 480 pixels (NTSC/PAL selectable)
45 degree
Microphone built-in (audio monitoring up to 30ft)
2 Lux (IR off); 0 Lux (IR on)
Up to 30ft (B/W)
IP54
1 x Angle adjustable antenna
500mA
Angle adjustable
1
DC 5V/1.0A
6” x 2.3” x 1.8” (camera body only)
1
Product Basics
Camera Lens
Sun Visor
Light Sensor
IR LED’s
Mounting Bracket
Power Socket
Antenna
Angle Adjust
Camera (SM-816DT)

Power LED
Microphone
Pair Button
6
Operation
Adding camera to SM-371DR/SM-804DR
Step 1: Press Pair button at the back of the camera as illustrated below.
Step 2: In the Menu options on receiver select Camera as shown below.
Step 3: Select Add/Remove Camera and pair it up with an UNLOCK icon
camera (1~4), as shown below.

7
Step 4: Select Yes to complete the Adding Camera process shown below.
NOTE: When adding a camera, the Pair button located on the back of the
camera must be pressed prior to pressing the OK button on the DVR/
Receiver to confirm the Add Camera selection. There is a 10 second grace
period for adding cameras, if pairing is unsuccessful before the 10 second
grace period has expired then an “Operation Failed” will appear, repeat
steps 1~4. Pairing must be done within 20 ft from the receiver.
Removing camera from SM-371DR/SM-804DR
Step 1: From the Menu options on the receiver select Camera.
Step 2: Select Add/Remove Camera and un-pair it with a LOCK icon
camera (1~4), press OK button.
Step 3: Finally select Yes and then OK button to remove the camera
from the receiver.
NOTE: Please reference DigiairWatch and DigiLCDDVR user’s manual
for more details.