SecurityMan DigiminiAir User manual

DigiminiAir User’s Manual
Digital Wireless Mini Indoor Camera Kit
with Audio

1
© Copyright 2012
This manual is furnished under license and may be used or copied only in
accordance with the terms of such license.
Except as permitted by such license, no part of this publication may be
reproduced, stored in a retrieval system, or transmitted, in any form or any means,
electronic, mechanical, recording, or otherwise, including translation to another
language or format, without the prior written permission of SecurityMan.
The content of this manual is furnished for informational use only, is subject
to change without notice, and should not be construed as a commitment by
SecurityMan. SecurityMan Inc assumes no responsibility or liability for any errors or
inaccuracies that may appear in this book.
FCC Information
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device should not cause harmful interference.
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Operation of this equipment in a residential area is likely to cause interference in
which case, the user at his or her own risk and expense will be required to correct
the interference.
Warranty
SecurityMan warrants that this product will be free from defects in title, materials
and manufacturing workmanship for one year from the date of the purchase or
otherwise specified on the package. If the product is found to be defective then,
as your sole remedy and as the manufacturer’s only obligation, SecurityMan will
repair or replace the product.
This warranty is exclusive and is limited to this product. This warranty shall not
apply to products that have been subjected to abuse, misuse, abnormal electrical
or environmental conditions, or any condition other than what can be considered
normal use.

2
Warranty Disclaimers
SecurityMan Inc, makes no other warranties, express, implied or otherwise,
regarding this product, and specifically disclaims any warranty for merchantability
or fitness for a particular purpose.
The exclusion of implied warranties is not permitted in some states and the
exclusions specified herein may not apply to you. This warranty provides you with
specific legal rights. There may be other rights that you have which vary from state
to state.
Limitation of Liability
The liability of SecurityMan Inc, arising from this warranty and sale shall be limited
to a refund of the purchase price. In no event shall SecurityMan be liable for costs
of procurement of substitute products or services, or for any lost profits, or for any
consequential, incidental, direct or indirect damages, however caused and on any
theory of liability, arising from this warranty and sale. These limitations shall apply
not withstanding any failure of essential purpose of any limited remedy.
For Tech Support Call: 888-977-3777
SecurityMan
4601 E. Airport Drive
Ontario, CA, 91761, USA
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.securitymaninc.com
Copyright 2012 by SecurityMan v1.0

3
Table of Contents
Introduction
Important
Operating Restrictions
Conditions
Safety Instructions
Features
Package Contents
Product Basics
Quick Start
Camera Installation (SM-209DT)
On-Screen Display
Signal Strength
Channel
No Signal
Operation
Adding and Pairing Camera to the Receiver
Switching between Channels/Cameras
Specifications
Troubleshooting
4
4
4
6
7
8
9
10
11
11
14
14
14
14
15
15
15
16
17

4
Introduction
Thank you for purchasing SecurityMan DigiminiAir. The DigiminiAir
is a “Do-It-Yourself” Digital Wireless Security camera kit designed for
easy installation and operation. With surveillance made easy, this DIY
kit will allow you to monitor your home, business, front or back doors,
garage, backyard, or any location that you would like to keep an eye on.
In comparison to the traditional wireless technology (analog), digital
wireless provides three key features which include: increased range of
transmission, secure signal (neighbors cannot pick up the signal) and
unlike analog, the digital signals are virtually interference-free from
crowded wireless analog devices such as: Wi-Fi routers, Bluetooth
devices, cordless phones, microwaves, and cell phones.
Important
This guide provides important information on the use and operation of
your DigiminiAir. Please read all the information carefully prior to using
the product for the best performance and to prevent any damage/
injuries or misuse of the device(s). Customers are entitled to have read
through this complete user’s manual before using the DigiminiAir. Any
unapproved changes or modifications will void your warranty.
Operating Restrictions
When using this product, the safety precautions below must be taken to
avoid possible legal liabilities and damages.
PLEASE NOTE that under certain circumstances, audio/video recording
may be PROHIBITED by law. This device should be used only in
compliance with all applicable federal, state and local statutes.

5
• DO NOT place this product too close to medical equipments. Radio
waves might potentially cause breakdown of electrical medical
equipment. This product should be placed at least one foot away from
any heart pacemaker. Radio waves might potentially influence heart
pacemaker and lead to respiratory disturbance.
• DO NOT use this product to violate one’s privacy. Monitoring one’s
private activities without consent is illegal and this product is not
designed and manufactured for these purposes.
• DO NOT this product to carry out any illegal activities such as sneak
preview, and etc. SecurityMan shall not be responsible for any
consequences of illegal conducts made by users.
• DO NOT put the plastic package bags in reach of children or babies.
Young children can choke on these items if they put them into their mouths.
• DO NOT plug the AC adapter into the outlet in improper situations.
• Plugging in an AC adapter with wet hands might cause electric shock.
• Plugging in the AC adapter unsteadily might cause re or electric shock.
• DO NOT cover the AC adapter when it is connected to an outlet, place
the adapter near heaters, or put it on the floor which is equipped with
a heater. The above mentioned operation might cause fire or incidents.
• DO NOT use it aboard; please abide by the airway’s provision. It might
influence communication aboard and the flying apparatus if departing
from the airway’s regulation. This will result in accident, possible death
and severe physical hurt.
• DO NOT disassemble or repair the camera, receiver or other relevant
peripheral equipments by yourself. Improper disassembly might cause
damage to the product internal parts, the peripheral equipment, or
personal injury.

6
• DO NOT put the camera in quaky paces. The camera may be unstable
or out of operation if installed improperly. Such installation may also
cause breakdown.
• DO NOT touch, shake or hold the antenna. Touching, shaking or holing
the antenna might influence the receiving of electromagnetic wave,
and thereby influence the receiving effect.
• DO NOT use the camera in complex environment, the obstruction of
stumbling block will affect the electromagnetic wave and influence
the receiving range. Wall, tree and other stumbling block might absorb,
reflect the electromagnetic wave, and influence the receiving range.
• DO NOT use the camera in the places which are covered with
metal.The around metal, such as elevator and cabin, might shield the
electromagnetic wave, and result in inability to receive signals.
• DO NOT use the camera near aggressive chemicals.
• DO NOT place the product near any strong magnetic objects
• DO NOT disassemble the product.
• DO NOT shake or strike the product.
• DO NOT attempt to service the product yourself as opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
Conditions
Please read the following messages to make sure your working
environment is suitable.
• The temperature should be kept between –20˚C and 60˚C (-4˚F to
140˚F). The relative humidity should be kept between 20% and 80%.

7
• Avoid putting the product in places where temperature or humidity
may change rapidly in temperature or humidity.
• Keep it dry, dustless and avoid exposure directly in sunlight.
• Keep product away from heat sources such as electric heater.
• It might inuence the normal operation of the product if used at the
fringe range of normal temperature. Please turn off the power when
not in use.
• Please obey the local government’s environment protection policy.
• In order to avoid inammation or electric shock, this camera kit should
be kept away from exposure to rain or moist, and it shall not be put in
or near bathrooms, washing polls, wash houses, moist basements, or
swimming pools, unless it is well shielded.
• In use of sockets set on walls or extension wires, attention should
be paid not to exceed their load capabilities to avoid inflammation or
electric shock.
• Switch off the power supply in thunder and lightning weather or when
not in use for long periods of time.
Safety Instructions
• Please read these instructions before using the product. This product
is neither waterproof nor dust proof; therefore it cannot be used
outdoors or in adverse environment.
• Please adopt original DC power supply, to avoid causing device
damage or electric shock or fire.
• Unauthorized dismantlement of the device or replacement of device

8
Features
• Do-it-yourself (D.I.Y) easy to setup and use wireless camera kit
• Mini size camera design.
• Wireless transmission up to 200ft between walls or up to 490ft in
clear line of sight.
• No Wi-Fi interference; no interference from crowded analog
900MHz/2.4GHz/5.8GHz/6.0GHz devices.
• Built-in microphone for audible recording up to 30ft away.
• AV output RCA interface from receiver to monitor for live display
or to a recorder.
• Digital wireless pairing between camera and receiver, worry free of
signal interception by neighbors.
• Supports up to 4 sets of digital wireless camera/receiver (CH1~CH4)
to a location.
• One receiver can support up to four digital wireless cameras
(switching one camera at a time).
• Video signal loss alert notication.
parts is forbidden. The manufacturer will not be responsible for any
loss arising from such actions.
• Do not put the device into fire, oven or microwave oven, in order to
avoid explosion.
• As a result of version changes, the user manual may be different from
the actual product. Please take the actual product as the standard.

9
Package Contents
1 x Receiver
(SM-451DR)
1 x Camera
(SM-209DT)
2 x AC Adapters 4 x Screws
1 x AV Cable
User’s Manual

10
Product Basics
Lens
Power Jack Pairing Button
Mounting Bracket
Channel Button
Pairing Button
Audio Output
Video Output
Power Socket
Docking Stand
Antenna
Antenna
Camera (SM-209DT)
Receiver (SM-451DR)
LED Lights
Microphone

11
Quick Start
Please follow steps 2~5 below and test both the camera and the receiver
first prior to installing the camera in the desired location. Do a simple test
to make sure the camera and the receiver are both working and that the
receiver are able to pick up the camera image.
Camera Installation (SM-209DT)
1. Mounting the camera:
a) Detach the cameras mounting bracket by removing the two
screws located on the left and right side of the camera using
a Philip screw driver.
b) Secure the camera’s mounting bracket in the desired location
using the wall mount bracket and screws provide as shown below.

12
c) Re-attach the camera to the mounting bracket and adjust the
viewing angle as needed (adjust by tilting up and down) as
illustrated below.
2. Connect the power adapter plug into the power socket attached to
the camera and then connect the power adapter (5VDC, 1.5A) into an
electrical power outlet as shown below.

AV Output to
TV/DVR/VCR
Input
or
13
3. Plug the receiver power supply (5VDC, 1.5A) to the receiver’s DC IN
port and the other end to an electrical power outlet. Next, connect
the AV cable out from the receiver to your TV/monitor or recording
devices (VCR or DVR) AV input.
Note: To power on the receiver, simply plug in the power supply, the
receiver do not have power ON/OFF switch. Make sure all cords are
connected, tight and that you are following the proper color coding
(Video/Yellow, Audio/White or Red)
4. Turn on your TV/monitor and set it to the appropriate input channel.
The TV/monitor must be on the A/V Input that you connected the
receiver to. For Example; A/V 1, Input 1, Video 1, Line 1, or Game 1.
Once the TV/monitor is on the proper input channel, you should
receive your picture and be able to hear audio from the camera’s
microphone.
Note: To tune your TV/monitor to the proper input channel, you must
do it directly on the TV/monitor itself or with the original TV remote.
5. By default, the camera is paired to Channel 1. If there is no picture
displayed on your TV/monitor, simply switch the receiver to Channel
1, and press the code-matching buttons on camera and receiver
simultaneously. The camera image will immediately be displayed on the
screen after successfully being matched to the receiver.

Channel
Signal Strength
No Signal
14
NOTE: Pairing must be done within 20ft.
On-Screen Display
Signal Strength
The signal bars on the on-screen display indicates the signal strength
between the camera and the receiver. [0~1 bars = weak/no reception;
4 bars = strong reception]
Channel
The channel number corresponds to the camera that is being monitored

15
or recorded. You can toggle between channels by simply pressing the
“CH” button located on the receiver.
No Signal
A “NO SIGNAL” notification will be displayed (followed by a melody)
whenever the user toggles to a channel with no camera matched to it or
if the camera and receiver are not successfully matched.
NOTE: The “Channel” and “Signal Strength” icons will turn orange during
the no signal warning.
Operation
Adding and Pairing camera to the receiver
To match multiple cameras to your receiver (4 max), simply switch
the receiver to a channel not being used (no signal), and press both
code-matching buttons on the camera and the receiver simultaneously
(within 20ft recommended). The camera image will immediately
be displayed on the screen after successfully being matched to the
receiver. A “NO SIGNAL” notification will be displayed, followed by a
melody if you switch the receiver to a channel that does not have a
camera matched to it.
NOTE: A “NO SIGNAL” notification will be displayed, followed by a
melodyBe sure to pair the add-on cameras with 20 feet of the receiver.
A simple transmission test to ensure both cameras and receiver are
functioning before applications.
Switching between channels/cameras
You can switch between cameras by manually pressing on the “CH”
button located on the receiver. A “NO SIGNAL” notification will be
displayed, followed by a melody if you switch the receiver to a channel
that does not have a camera matched to it.
NOTE: Channel can be changed by manually pressing on the “CH”
button; auto channel switching is not supported.

16
Specifications
Image Sensor
Resolution
View Angle
Audio
Minimum Illumination
Pairing Button
Power Supply
Dimensions
Channel Button
Pairing Button
AV Output
Power Supply
Dimensions (LxWxH)
Stand
Frequency
Transmission power
Receiver Sensitivity
Modulation
Antenna
Transmission Distance
Operating Temperature
Operating Humidity
1/4” CMOS Color
510 x 492 pixels (NTSC)
60 degree
Microphone built-in (up to 30ft)
3 Lux/F1.2
1
DC 5V / 1.5A
1.45” x 1.45” x0.8”
1 CH button (Manually Select CH1~CH4)
1
1 x Video out (RCA); 1 x Audio out (RCA)
DC 5V / 1.5A
4.2” x 2.7” x 0.9”
1 x docking stand
ISM 2400 – 2480 MHz (CH1/CH2/CH3/CH4)
17 dBm
≤-85dBm
GFSK
Omni 3dBi
Up to 490 ft (150m) clear line of sight;
up to 200ft (indoor)
-20°C to 60°C (-4°F to 140°F)
20% -80% RH
SM-209DT
(Camera)
SM-451DR
(Receiver)
Wireless

17
Troubleshooting
Q: There is no picture from a camera?
Check all connections to the camera and the receiver. Make sure that the
camera and receiver are both ON and that the camera(s) is in range of the
Receiver.
Q: The image from the camera(s) is choppy and/or keeps cutting out?
The wireless receiver may be out of range of the camera(s). Use the signal
bars on the on-screen display to observe signal strength. 0~1 bars = no/
weak reception; 4 bars = strong reception.
Q: I can’t hear any sound on my TV?
Check the connections between the receiver and the TV, specifically the
red and/or white connector(s) are plugged in correctly. Check the volume
settings on the TV. Also, remember that the range of the microphone is
not the same as the range of the camera – the camera will detect anything
in front of it that it sufficiently lit, however a microphone will only pick-up
sound within a few feet (unless the sound is very loud).