ENFORCER EV-C1303-NMGQ User manual

EV-C1303-NMGQ
High Resolution 1000 TV Line Camera
OSD Manual
• 1000 TV Lines
• Wide Dynamic Range (WDR)
• Digital Noise Reduction (DNR)
• Smart IR
• Motion detection
• Digital Slow Shutter (DSS)
• High Light Compensation (HLC) and
Back Light Compensation (BLC)
• Day/Night Mode
• Defog

1000 TVL Camera On-Screen Display Manual
SECO-LARM U.S.A., Inc.
2
Features...................................................................2
MenuDiagram.....................................................3~5
Navigatingthe OSD................................................5
Lens.........................................................................6
Exposure.................................................................6
WhiteBalance.........................................................7
BackLight............................................................7~8
DNR.........................................................................9
Day& Night.......................................................9~10
Image.....................................................................10
System.............................................................11~12
Special.............................................................12~15
Exit.........................................................................15
Troubleshooting.....................................................16
Table of Contents:
1000 TV Lines
• 1000TVLine resolutionwith a1.3 MegapixelSony ExmorSensor (IMX138).
Shutter/AGC
• Adjuststhe shutterspeed andautomatic gaincontrol (AGC)
Wide Dynamic Range (WDR)
• Providesclear imageseven undercircumstances inwhich backlightillumination canvary.
Digital Noise Reduction (DNR)
• Preventsthe blurringof movingobjects andactivates onlywhen movingobjects appear.
Smart IR
• Reducesthe saturationof closeobjects inlow-light conditionsby controllingthe IRsensitivity.
Digital Slow Shutter (DSS)
• Improvesimage clarityin low-lightenvironments.
High Light Compensation (HLC)
• Denes target areas and remove spotlights to make certain objects visible.
Back Light Compensation (BLC)
• Adjuststhe exposureto properlydisplay thesubject infront ofa brightlight source.
White Balance
• Adjuststhe picture’scolortemperature/image color.
Day/Night Mode
• Adjuststhe levelof ambientlight thattriggers thecamera toswitch betweencolor andB/W.
Privacy
• Blocksout oremphasize aportion ofthe image.
Motion Detection
• Detectsif thereis motionin thescene.
Defog
• Improvesthe clarityof imagestaken inpoor conditionssuch asfog, smoke,rain orsnow.
Features:

1000 TVL Camera On-Screen Display Manual
SECO-LARM U.S.A., Inc. 3
1. Lens DC MODE INDOOR / OUTDOOR / DEBLUR
RETURN
MANUAL MODE NORMAL/ DEBLUR
RETURN
2. Exposure
BRIGHTNESS (0~20)
SHUTTER
AUTO
MANUAL SPEED (1/60~1/60000)
RETURN
FLICKER
SENS-UP (OFF / 2x~32x)
AGC (0~20)
RETURN
3. White Bal
ATW
AWB
AWC-SET
MANUAL
KELVIN LOW / MIDDLE / HIGH
R-GAIN (0~20)
B-GAIN (0~20)
RETURN
4. Backlight
OFF
HLC LEVEL(0~20) MODE ALLDAY / NIGHT ONLY
RETURN
BLC
H-POS (0~20)
V-POS (0~20)
H-SIZE (0~20)
V-SIZE (0~20)
RETURN
WDR WEIGHT LOW / MIDDLE / HIGH
RETURN
5. DNR
OFF
LOW
MIDDLE
HIGH
6. Day & Night
EXTERN
SMART IR (0~20)
EXTERN S/W LOW / HIGH
DELAY LOW / MIDDLE / HIGH
RETURN
AUTO
SMART IR (0~20)
AGC THRES (0~20)
AGC MARGIN (0~20)
DELAY LOW / MIDDLE / HIGH
RETURN
COLOR
B/W SMART IR (0~20)
RETURN
Menu Diagram:

1000 TVL Camera On-Screen Display Manual
SECO-LARM U.S.A., Inc.
4
7. Image
SHARPNESS (0~10)
GAMMA(0.45~0.65)
PEDESTAL (0~20)
COLOR GAIN (0~20)
MIRROR (OFF / ON)
FLIP (OFF / ON)
RETURN
8. System
COM CAM ID (0~255) BAUDRATE 2400 / 4800 / 9600 / 57600 / 115200
RETURN
VIEWANGLE WIDE 4:3 WIDE 16:9 XYADJUST
NORMAL XYADJUST
CVBS NTSC / PAL
RESET ON PUSHING
RETURN
9. Special
D-ZOOM (1.0x~8.0x)
D-WDR OFF / LOW / MIDDLE / HIGH
DEFOG
OFF
ON
MODE AUTO
MANUAL
LEVEL LOW MIDDLE
HIGH
RETURN
SHADING OFF
ON WEIGHT (0~100%)
RETURN
PRIVACY
OFF
ON
ZONE NUM (0~15)
ZONE DISP (ON / OFF)
H-POS (0~40)
V-POS (0~32)
H-SIZE (0~40)
V-SIZE (0~32)
Y-LEVEL(0~20)
CR LEVEL(0~20)
CB LEVEL(0~20)
RETURN
Menu Diagram, continued:

1000 TVL Camera On-Screen Display Manual
SECO-LARM U.S.A., Inc. 5
9. Special INTELLIGENT
MTN TRACKER
OFF
ON
DET. SETTING
SENSITIVITY (0~20)
OBJ. KEEP LV (0~60)
MOTION EST. (0~20)
SIGNAL OUT
(OFF / ON)
RETURN
WINDOW TONE (0~6)
WINDOW ZONE (0~3)
WINDOW USE (OFF / ON)
DETH-POS (0~40)
DETV-POS (0~32)
DETH-SIZE (0~40)
DETV-SIZE (0~32)
RETURN
ALARM
ANTI-SHIFT (OFF / ON)
SHIFT SCALE (0~20)
ANTI-BLOCK (OFF / ON)
BLOCK SCALE (0~20)
RETURN
QUICK ZOOM
OFF
ON
MOVING (0/60~240/60 sec)
ZOOM IN (0/60~240/60 sec)
STANDBY (0/60~240/60 sec)
SYNCHRONOUS (OFF / ON)
TRACKING (OFF / ON)
REPEAT (OFF / ON)
RETURN
RETURN
10.Exit
Menu Diagram, continued:
Navigating the OSD:
Menuitems canbe selectedusing theOSD controller.
1. Pressdown onthe joystick.TheSetup Menuwill bedisplayed onthe monitor.
2. Moveto andhighlight therequired functionby movingthe joystickup anddown.
3. Selectthe requiredfunction bypressing down
onthe joystick.
4. Changethe menusetting bymoving thejoystick
leftand right.
5. Afterchoosing thesettings, movethe cursorto
EXITandpress downon thejoystick.
NOTE:
• Asubmenu isavailable wherethe
optionreads .
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
EXTERN

1000 TVL Camera On-Screen Display Manual
SECO-LARM U.S.A., Inc.
6
Thisfunction controlsexposure viaone offour modes(Brightness, Shutter, Sens-Up,andAGC).
1. Movethe joystickup ordown tohighlight EXPOSUREon theSETUPmenu screen.
2. Selectthe desiredmode bymoving thejoystick leftor right.
3. SelectRETURN toreturn tothe SETUPmenu.
A.Brightness:Adjusttheoverallbrightnesslevel
(0~20).
B.Shutter:Adjusttheshutterspeed.
i. AUTO:Automaticallyadjust theshutter
speed.
ii. MANUAL:Manually adjusttheshutterspeed
(1/60~1/60,000).
iii. FLICKER:Select FLICKERto avoidimage
ickering in different frequencies.
C.Sens-Up: Slowthe shutterspeed toallow the
sensorto accumulatemore light(2x~32x).
D.Automatic GainControl (AGC):Ahigherlevelof
AGCincreases brightness,but alsoincreases any
noise(0~20).
2. EXPOSURE
BRIGHTNESS
SHUTTER
SENS-UP
AGC
RETURN
AUTO
X16
IIIIIIIIII IIIIIIIIII|10
IIIIIIIIII IIIIIIIIII|15
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
EXTERN
Lens:
Thisfunction controlsthe camera’slensoperation.
1. Movethe joystickup ordown tohighlight LENSon theSETUPmenu screen.
2. Selectthe desiredmode bymoving thejoystick leftor right.
3. SelectRETURN toreturn tothe SETUPmenu.
A.DC: SelectDC fora DClens, andchoose a
settingbased onthe operatingenvironment
(INDOOR/ OUTDOOR/ DEBLUR)
B.Manual: SelectManual fora Manuallens,
andchoose asetting basedon theoperating
environment(NORMAL/DEBLUR)
Exposure:
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
EXTERN

1000 TVL Camera On-Screen Display Manual
SECO-LARM U.S.A., Inc. 7
Thisfunction isused tocontrol thelight levelto compensatefor strongbacklight conditions.
1. Movethe joystickup ordown tohighlight
BACKLIGHTonthe SETUPmenuscreen.
2. Selectthe desiredmode bymoving thejoystick left
orright.
3. SelectRETURN toreturn totheSETUPmenu.
Thisfunction isused toadjust thecolor temperatureand imagecolor ofthe picture.
1. Movethe joystickup ordown tohighlight WHITEBALANCE onthe SETUPmenuscreen.
2. Selectthe desiredmode bymoving thejoystick leftor right.
3. SelectRETURN toreturn tothe SETUPmenu.
A.AutomaticTrackingWhiteBalance (ATW):
Automaticallyadjust thewhite balancewhen
theimage colortemperature changes,within
arange of1,800°K~10,500°K (forexample, a
uorescent lamp or outdoors).
B.Automatic WhiteBalance (AWB):Match the
ambientenvironment’scolor temperature.This
shouldbe usedwhen thecolor temperatureis
between3,000°K~7,000°K.
C.AWC→SET:Afterallowing thecamera tofocus
ona blankwhite pieceof paper, pressthe
SETbutton.If thelightning conditionschange,
readjustmentis needed.
D.Manual:Afteradjustthewhitebalanceusing
ATWorAWB,usethe Manualsetting toset the
whitebalance levelmanually usingred andblue
levels.
NOTE:White Balancemay notfunction properlyunder thefollowing circumstances;in thesecases, use
AWBmode:
• Thereis avery highcolor temperaturearound thesubject (forexample, whilethere isa clear
skyor duringsunset).
• Itis verydark.
• The camera is directly facing uorescent lighting or there is a drastic lighting change.
White Balance:
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
EXTERN
MANUAL
KELVIN
R-GAIN
B-GAIN
RETURN
10
10
IIIIIIIIII IIIIIIIIII|
IIIIIIIIII IIIIIIIIII|
MIDDLE
Back Light:
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
EXTERN
MENU

1000 TVL Camera On-Screen Display Manual
SECO-LARM U.S.A., Inc.
8
A.High LightCompensation (HLC):Select this
modeto improvethe clarityof thepicture by
blockinga strongbacklight.
B.Back LightCompensation (BLC):Select this
modeto correctthe exposureof subjectsthat
arein frontof astrong backlight.
i. H-POS:Adjust thehorizontal positionof
theBLC area(0~20).
ii. V-POS:Adjust thevertical positionof the
BLCarea (0~20).
iii. H-SIZE:Adjust thehorizontal sizeof the
BLCarea (0~20).
iv. V-SIZE:AdjusttheverticalsizeoftheBLC
area(0~20.
C.Wide DynamicRange (WDR):Thisfunction
providesclear imageseven under
intensebacklight conditions,even when
lightlevels canvary excessively
(LOW/ MIDDLE/ HIGH).
HLC OFF HLC ON
Back Light, continued:
HLC
LEVEL
MODE
RETURN ALL DAY
IIIIIIIIIIIIIIIIIIII|10
BLC
V-POS
H-SIZE
V-SIZE
RETURN
7
5
6
4
WDR
WEIGHT
RETURN HIGH
WDR OFF WDR ON

1000 TVL Camera On-Screen Display Manual
SECO-LARM U.S.A., Inc. 9
Thisfunction willswitch thecamera tocolor orblack andwhite modeautomatically,dependingon the
currentillumination conditions.
1. Movethe joystickup ordown tohighlight DAY&
NIGHTonthe SETUPmenuscreen.
2. Selectthe desiredmode bymoving thejoystick left
orright.
3. SelectRETURN toreturn tothe SETUPmenu.
A.EXTERN: Changebetween COLORand B&W
modesautomatically throughthe connectionwith
theground terminal.
i. SMARTIR: Compensatefor IRsaturation
(0~20).
ii. EXTERNS/W:(LOW /HIGH).
iii. DELAY:Setthedelayforswitchingbetween
thetwo modes(LOW /MIDDLE /HIGH).
B.AUTO:Select toautomatically shiftinto color
modein brightenvironments andB&W in
low-lightenvironments.
i. SMARTIR: Compensatefor IRsaturation
(0~20).
ii. AGCTHRES:AGC thresholdlevel (0~20).
iii. AGCMARGIN:AGC Day/Nightmargin level
(0~20).
Thisfunction isused tocontrol thereduction ofdigital noisein low-lightconditions (OFF/ LOW/ MIDDLE/
HIGH).
1. Movethe joystickup ordown tohighlight DNRon
theSETUPmenu screen.
2. Selectthe desiredmode bymoving thejoystick left
orright.
3. SelectRETURN toreturn tothe SETUPmenu.
NOTE:Increasing theDNR levelincreases the
effectivenessofnoise reduction.However,a high
DNRlevel maycause ghostingto appearin the
image.
DNR:
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
EXTERN
6. DAY&NIGHT
SMART IR
EXTERN S / W
DELAY
RETURN
IIIIIIIIIIIIIIIIIIII 0
LOW
LOW
| |
6. DAY&NIGHT
SMART IR
AGC THRES
AGC MARGIN
DELAY
RETURN
IIIIIIIIIIIIIIIIIIII 0
10
10
LOW
| |
IIIIIIIIIIIIIIIIIIII
IIIIIIIIIIIIIIIIIIII
|
|| |
|
|
Day & Night:
MENU
DC
ATW
OFF
MIDDLE
EXTERN
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT

1000 TVL Camera On-Screen Display Manual
SECO-LARM U.S.A., Inc.
10
Day & Night, continued:
C.COLOR: Setthe videooutput toalways becolor.
D.B/W:Set thevideo outputto alwaysbe black
andwhite.
i. SMARTIR: Compensatefor IRsaturation
(0~20).
6. DAY&NIGHT
SMART IR
RETURN IIIIIIIIIIIIIIIIIIII 0
| |
Image:
Thisfunction allowsadditional controlover image
settings.
1. Movethe joystickup ordown tohighlight IMAGE
onthe SETUPmenuscreen.
2. Selectthe desiredmode bymoving thejoystick left
orright.
3. SelectRETURN toreturn tothe SETUPmenu.
A.SHARPNESS: Increasethe sharpnessof the
image’soutline(0~10).
B.GAMMA:Adjustthegammalevel(0.45~0.65).
C.PEDESTAL:Adjustthepedestallevel(0~20).
D.COLOR GAIN:Adjust thecolor gainlevel (0~20).
E.MIRROR: Reversethe imagehorizontally.
F. FLIP:Reverse theimage vertically.
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
EXTERN
7. IMAGE
SHARPNESS
GAMMA
PEDESTAL
COLOR GAIN
MIRROR
FLIP
RETURN
0.55
OFF
OFF
IIIIIIIIII IIIIIIIIII|
IIIIIIIIII IIIIIIIIII|
IIIIIIIIII IIIIIIIIII|
5
8
10

1000 TVL Camera On-Screen Display Manual
SECO-LARM U.S.A., Inc. 11
System:
Thisfunction isused tochange theviewing
angle,switch betweenPALandNTSC
systems,and resetthe camerasettings.
1. Movethe joystickup ordown tohighlight SYSTEM
onthe SETUPmenuscreen.
2. Selectthe desiredmode bymoving thejoystick left
orright.
3. SelectRETURN toreturn tothe SETUP
menu.
A.COM: Notused.
B.VIEWANGLE:Adjustthe aspectratio
(WIDE4:3 /WIDE 16:9/ NORMAL).
i. XYADJUST:Adjustthescreenimage
(Left/Rightand Up/Down).
NOTE:XYADJUSTisonlyavailablewhenWIDE
16:9or NORMALhasbeen selectedfrom theVIEW
ANGLEmenu.
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
EXTERN
8. SYSTEM
COM.
VIEW ANGLE
CVBS
RESET
RETURN
WIDE 4 : 3
NTSC
ON
XYADJUST
(+0 /±0)
(+0 /±120)
LEFT / RIGHT
UP /DOWN
ENTER - RETURN
XYADJUST
(+0 /±160)
(+0 /±120)
LEFT / RIGHT
UP /DOWN
ENTER - RETURN

1000 TVL Camera On-Screen Display Manual
SECO-LARM U.S.A., Inc.
12
C.CVBS: SwitchbetweenPALandNTSC systems.
D.RESET:Pressand holdthe SETbuttonfor 2~3
secondsto restorethe camera’ssettingsto their
factorydefault values.
8. SYSTEM
COM.
VIEW ANGLE
CVBS
RESET
RETURN
WIDE 4 : 3
NTSC
ON
System, continued:
Thisfunction isused tocontrol variousfunctions,
includingzoom, motiondetection, andprivacy.
1. Movethe joystickup ordown tohighlight SPECIAL
onthe SETUPmenuscreen.
2. Selectthe desiredmode bymoving thejoystick left
orright.
3. SelectRETURN toreturn tothe SETUPmenu.
A.D-ZOOM: Enabledigital zoom(1x~8x).
B.D-WDR: Compensatefor strongbacklight
conditionsusing intelligentlight levelcontrol
(OFF/ LOW/ MIDDLE/ HIGH).
Special:
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
EXTERN
SPECIAL
D-ZOOM
D-WDR
DEFOG
SHADING
PRIVACY
INTELLIGENT
RETURN
1. 0X
OFF
OFF
OFF
OFF

1000 TVL Camera On-Screen Display Manual
SECO-LARM U.S.A., Inc. 13
C.DEFOG: Improveimage clarityin foggyor
dustyconditions.
i. MODE:Change theDEFOG mode
(AUTO/MANUAL).
ii. LEVEL:Change thelevel ofDEFOG
(LOW/ MIDDLE/ HIGH).
D.SHADING: Increasebrightness levelwhen
awide lensangle causesthe sidesof the
imagesto bedarker thanthe center.
iii. WEIGHT:Adjustthe amountof shading
compensation(0~100%).
E.PRIVACY:Hide upto 15differentareas of
theimage.The sizeof eachprivacy maskis
adjustable.
iv. ZONENUM:Selecttheprivacymaskto
adjust(0~15).
v. ZONEDISP:Turnselectedprivacymask
ONor OFF.
vi. H-POS:Adjust thearea’shorizontalposition
(0~40).
vii. V-POS:Adjust thearea’svertical position
(0~32).
viii. H-SIZE:Adjust thearea’shorizontal size(0~40).
ix. V-SIZE:Adjust thearea’svertical size(0~32).
x. YLEVEL:Adjust theYlevel(0~20).
xi. CRLEVEL:Adjust theCR level(0~20).
xii. CBLEVEL:Adjust theCB level(0~20).
DEFOG ON
DEFOG
MODE
LEVEL
RETURN
AUTO
MIDDLE
SHADING
WEIGHT
RETURN 100%
DEFOG OFF
Special, continued:
PRIVACY
ZONE NUM
ZONE DISP
H-POS
V-POS
H-SIZE
V-SIZE
Y LEVEL
CR LEVEL
VB LEVEL
RETURN
0
OFF
12
2
3
3
IIIIIIIIII IIIIIIIIII|
| |
IIIIIIIIII IIIIIIIIII|
| |
IIIIIIIIII IIIIIIIIII|| |
10
10
10

1000 TVL Camera On-Screen Display Manual
SECO-LARM U.S.A., Inc.
14
F. INTELLIGENT: Providesintelligent functions
basedon motiontracking, intendedfor crime
preventionand detection.
i. MTNTRACKER:Adjust amotion tracking
area.
a. DETSETTING:Adjust themotion
detectionsettings.
•SENSITIVITY:Adjust themotion
detectionsensitivity (0~20).
•OBJKEEPLV:Setthelevelatwhich
objectswill remainhighlighted (0~60).
•MOTIONEST:Setthelevelatwhich
objectsare estimated(0~20).
•SIGNALOUT: Notused.
b. WINDOWTONE:Setthe shadeof the
maskedarea (0~6).
c. WINDOWZONE: Selectthe windowzone
toadjust (0~3).
d. WINDOWUSE:Turntheselected zoneon
oroff(OFF /ON).
e. DETH-POS:Adjust thehorizontal position.
f. DETV-POS:Adjustthe verticalposition.
g. DETH-SIZE:Adjust thehorizontal size.
h. DETV-SIZE:Adjustthe verticalsize.
ii. ALARM:SetANTI-BLOCK orANTI-SHIFT,
offeringsecurityagainst potentialtampering.
a. ANTI-SHIFT:EnableordisableANTI-SHIFT.
WhileANTI-SHIFTis enabled,if someone
attemptsto shiftthe camera,a warning
message(SHIFTING DETECTED!)will appearon screen.
b. SHIFTSCALE:Adjust thelevel ofANTI-SHIFT(0~20).
c. ANTI-BLOCK:Enable ordisableANTI-BLOCK. WhileANTI-BLOCK isenabled, ifsomeone
attemptsto blockthe camera,a warningmessage (BLOCKINGDETECTED!) willappear on
screen.
d. BLOCKSCALE:Adjust thelevel ofANTI-BLOCK (0~20).
MTN TRACKER
DET. SETTING
WINDOW TONE
WINDOW ZONE
WINDOW USE
DET H-POS
DET V-POS
DET H-SIZE
DET V-SIZE
RETURN
0
0
OFF
1
2
16
12
INTELLIGENT
MTN TRACKER ON
ALARM
QUICK ZOOM OFF
RETURN
Special, continued:
ALARM
ANTI-SHIFT
SHIFT SCALE
ANTI-BLOCK
BLOCK SCALE
RETURN
ON
ON
IIIIIIIIII IIIIIIIIII
|
| |IIIIIIIIII
IIIIIIIIIIIIIIIIIIII | |
10
3

1000 TVL Camera On-Screen Display Manual
SECO-LARM U.S.A., Inc. 15
iii. QUICKZOOM: EnableQUICK ZOOMto have
thecamera zoomin ona designatedmotion
detectionarea whenmotion isdetected inthat
area.Thearea mustbe setusing theMTN
TRACKERsetting (seepg. 14).
a. MOVING:Set thezoom in/outspeed
(0/60~240/60seconds).
b. ZOOMIN: Setthe timeleft zoomedin
(0/60~240/60seconds).
c. STANDBY:Setthedelaytimebeforezoomingin(0/60~240/60seconds).
d. SYNCHRONOUS:Turnsynchronous zoomON orOFF.
e. TRACKING:Turnmotion trackingON orOFF.
f. REPEAT:Turnrepeatzoom ONor OFF.
Special, continued:
QUICK ZOOM
MOVING
ZOON IN
STANDBY
SYNCHRONOUS
TRACKING
REPEAT
RETURN
30 / 60 SEC
30 / 60 SEC
30 / 60 SEC
OFF
OFF
OFF
MOTION DETECTED !!!
Navigateto theEXIToption tosave thecurrent
settingsand exitthe setupmenu.
Exit:
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
EXTERN

1000 TVL Camera On-Screen Display Manual
SECO-LARM U.S.A., Inc.
16
WARRANTY:This SECO-LARM product is warranted against defects in material and workmanship while used in normal
service for three (3) years from the date of sale to the original customer. SECO-LARM’s obligation is limited to the repair
or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. This Warranty is void
if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or alteration,
improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment
is not operating properly as a result of causes other than defects in material and workmanship. The sole obligation of
SECO-LARM and the purchaser’s exclusive remedy, shall be limited to the replacement or repair only, at SECO-LARM’s
option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property
damage of any kind to the purchaser or anyone else.
NOTICE: The information and specications printed in this manual are current at the time of publication. However, the
SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right to
change specications without notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2014 SECO-LARM U.S.A., Inc.All rights reserved. This material may not be reproduced or copied, in whole or
in part, without the written permission of SECO-LARM.
SECO-LARM®U.S.A., Inc.
16842 MillikanAvenue, Irvine, CA92606 Website: www.seco-larm.com PIKHR1
Phone: [phone] | [phone] Email: [email protected] MiEV-C1303-NMGQ-OSD
_141024.indd
Nothingappears onthe screen. • Checkthe powercable, powersupply output,and video
connectionbetween thecamera andmonitor.
Theimage onthe screenis dim.
• Cleanthe cameralens /lens glasswith asoft cleancloth.
• Adjustthe monitrorcontrols asrequired.
• Ifthe camerais facinga verystrong light,change thecamera
position.
• Adjustthe lensfocus.
Theimage onthe screenis dark. • Adjustthe contrastcontrol ofthe monitor.
• If there is an intermediate device, correctly set the 75Ω/Hi-z.
Thecamera isnot workingproperly
andthe surfaceof thecamera is
hot.
• Checkthat thecamera iscorrectly connectedto anappropriate
regulatedpower source.
Motiondetection isnot activated. • Checkthat MOTIONDEThas beenset toON inthe Setup Menu.
• Check that the MD AREA has been properly dened.
Thecolor ofthe pictureis not
correct. • Checkthe settingsin theWHITE BALANCEmenu.
The image on the screen ickers. • Makesure thatthe cameraisn’t facingdirect sunlightor
uorescent light; if necessary, change the camera position.
SENS-UPdoesnot work.
• Checkthat theAGC settingin theEXPOSURE menuisn’t setto
OFF.
• Checkthe EXPOSUREmenu andmake sureSHUTTER isset
toAUTO.
Troubleshooting: