SecurityMan CUcam1 User manual

900MHz
900MHz
900MHz

900MHz
2
SM-202-900TX
SM-202-900RX
• 1 x manual
Thank you for purchasing the CUcam

Do-it-yourself(D.I.Y.), easy to setup and use•
Perfect for monitoring around your home or business•
Wireless video direct to your TV or recorder•
High quality picture and sound transmitting and receiving•
No interference from crowded 2.4GHz devices•
Built-in IR LEDs for night vison (up to 23ft, B/W)•
Stronger wall penetration than 2.4GHz/5.8GHz wireless transmission•
Video transmission goes up to 330ft clear line of sight or 100ft indoor•
Weatherproof camera design for outdoor usage•
Flexible channel setting camera design•
Two-channel receiver allows up to 2 wireless cameras connection•

A/V Output (To Monitor/TV)

5)

Away from the cameraToward the camera

Image Sensor 1/4_CMOS
Total Pixels 510(H)_492(V)
Video Format NTSC
Minimum Illumination 0 lux (IR on)
Night Vision Range Up to 23ft
Lens Internal, f=3.6mm sh eye lens
Transmission Frequency 900MHz
Modulation Type FM
S/N 40dB(AGCOff)
Transmission Power 2~30mW
Audio Frequency Band 4.5MHz
Microphone Built-in
Voice Monitoring Distance up to 20ft
Power Consumption 200mA(IR ON)/80mA(IR OFF)
Antenna SMA
Transmission Distance up to 330ft
Power 8V 300mA(Positive inside)
Weatherproof IP54
16

Transmission Frequency 900MHz
Channel Indication 1 Green LED
Frequency Stability ±100KHz
Local Oscillator Leakage ≤-55dBm
Receiving Sensitivity ≤-85dBm
Differential Phase 10Deg.
S/N 38dB
Video Output Impedance 75ohm
Video Output Voltage 1.0±0.2Vp-p(Standard value:1Vp-p)
Audio Carrier 4.5MHz
Audio Frequency Band 100_20KHz
Audio Output Impedance 10Kohm
Audio Output Impedance 1.2±0.4Vp-p(Standard value:1Vp-p)
Audio S/N 50dB
Antenna Type SMA
RF Input Impedance 50ohm
Power Consumption 180mA(MAX.)
Power 8V 300mA (Positive inside)
Power Switch Touch Button
17

18