Securitytronix IPKB-1005KI User manual

0
IPKB-1005KI
User Manual
UD.6L0203D1180A02

User Manual of IPKB-1005KI Keyboard
1
User Manual
About this Manual
This Manual is applicable to DS-1005KI Keyboard.
The Manual includes instructions for using and managing the product. Pictures, charts, images and all other
information hereinafter are for description and explanation only. The information contained in the Manual is
subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the
company website.
Please use this user manual under the guidance of professionals.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH
ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND
ERRORS, AND OUR COMPANY MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A
PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL OUR
COMPANY, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY
SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR
DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF OUR COMPANY
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE
WHOLLY AT YOUR OWN RISKS. OUR COMPANY SHALL NOT TAKE ANY RESPONSIBILITES FOR
ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER
ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS;
HOWEVER, OUR COMPANY WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS
THE APPLICABLE LAW. OUR COMPANY SHALL NOT BE LIABLE IN THE EVENT THAT THIS
PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE
LATER PREVAILS

User Manual of IPKB-1005KI Keyboard
2
Regulatory information
FCC information
FCC compliance: This equipment has been tested and found to comply with the limits for a digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his own expense.
FCC conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the
applicable harmonized European standards listed under the Low Voltage Directive 2006/95/EC, the EMC
Directive 2004/108/EC, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal
waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated collection points. For more information see:
www.recyclethis.info.
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal
waste in the European Union. See the product documentation for specific battery information. The battery is
marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For
proper recycling, return the battery to your supplier or to a designated collection point. For more information see:
www.recyclethis.info.

User Manual of IPKB-1005KI Keyboard
3
Preventive and Cautionary Tips
Before connecting and operating your keyboard, please be advised of the following tips:
Ensure unit is placed in a well-ventilated, dust-free environment.
Keep all liquids away from the keyboard.
Please check the power supply to avoid the damage caused by voltage mismatch.
Please make sure the keyboard work in the allowed range of temperature and humidity.
Please keep the device horizontal and avoid the installation under severe vibration environment.
The dust board will cause a short circuit after damping. Please dedust regularly for the board, connector, and
chassis fan with brush.

User Manual of IPKB-1005KI Keyboard
4
Table of Contents
Chapter 1 Product Overview...............................................................................................4
1.1 Introduction................................................................................................................. 4
1.2 Typical Application..................................................................................................... 4
1.3 Controlling Mode........................................................................................................ 4
Chapter 2 Functional Keys and Joystick ...............................................................................6
2.1 Functional Keys .......................................................................................................... 6
2.2 Joystick....................................................................................................................... 7
Chapter 3 Keyboard Application..........................................................................................8
3.1 USB Keyboard Mode................................................................................................ 8
3.1.1 Setting Keyboard Mode................................................................................ 8
3.1.2 Keyboard Control ......................................................................................... 8
3.2 USB Joystick Mode................................................................................................. 10
3.2.1 Keyboard Parameter Settings.................................................................... 10
3.2.2 DVR/NVR Control...................................................................................... 12
Appendix1: Specification.....................................................................................................14
Appendix2: Device Upgrade ................................................................................................15

User Manual of IPKB-1005KI Keyboard
4
Chapter 1 Product Overview
1.1 Introduction
IPKB-1005KI keyboard is a kind of USB interface controlling keyboard which supports USB
HID protocol; it can be applied with USB joystick mode and supports various programmable
keys for users to set custom functions. The keyboard can be used to control the DVR/NVR
device with the functional keys operation. It is easy to operate with simple GUI interfaces. This
keyboard can be widely used in public security and transportation as other fields.
1.2 Typical Application
Make sure the DVR and PC-DVR connected support the IPKB-1005KI keyboard access.
IPKB-1005KI is a USB keyboard independently developed by our company and it can be
accessed directly by the client software, platform software of iVMS series, DVR and PC-
DVR, and can realize functions such as windows switch, PTZ control, capture, recording, etc.
1.3 Controlling Mode
The IPKB-1005KI keyboard connects with PC via keyboard USB interface and supports two
ways of controlling: USB keyboard mode and USB joystick mode.
IPKB-1005KI is compatible with the USB joystick via USB HID protocol, and can access to
the
IPKB-1005KI

User Manual of IPKB-1005KI Keyboard
5
third-party platform software. It can be applied with USB keyboard mode and supports capture,
PTZ control and window switch. With the use of DVR/NVR, it can realize the menu selection,
camera switch in live view, PTZ control, etc.
The default mode is set as USB joystick mode when it is powered on for the first time; there is no
need to install the drive.
USB keyboard mode supports private SDK accessing and functions such as quick switch, PTZ
control, capture and recording.
It is required to install a drive before setting the IPKB-1005KI to USB keyboard mode. Two
types of drives can be selected, depending on 32 BIT system or 64 BIT system.

User Manual of IPKB-1005KI Keyboard
6
Chapter 2 Functional Keys and Joystick
2.1 Functional Keys
Refer to the following figure and table for the description of the functional keys.
1
2
4
6
3
5
7 8
Table 1. 1 Description of Keyboard
NO.
Key Name
Function Description
1
0 to 9 Number
Keys
USB Keyboard Mode: For selecting window or channel;
USB Joystick Mode: For custom shortcuts;
2
Enter
USB Keyboard Mode: For confirming the input number;
3
Window/Channel
Switch
Press and hold it for more than 5s to switch between keyboard mode
and joystick mode;
USB Keyboard Mode: For selecting window switching mode or
channel switching mode;
(The window indicator lights while in window switching mode; and
the channel indicator lights while in channel switching mode.)
4
Capturing
USB Keyboard Mode: Capture;
USB Joystick Mode: Custom shortcut as number 12;
5
Recording
USB Keyboard Mode: For recording;
USB Joystick Mode: Custom shortcut as number 11;
6
F1, F2, F3
USB Keyboard Mode: Custom Shortcut;
USB Joystick Mode: F1-13,F2-14,F3-15
7
Indicator
Single Indicator: The keyboard is in USB keyboard mode;
Double Indicator: The keyboard is in USB joystick mode;
8
Digital Tube
Display the input number.

User Manual of IPKB-1005KI Keyboard
7
2.2 Joystick
Table 1. 2 Description of Joystick
Graphic
Operation
Function
Up
PTZ control mode: Move the PTZ up.
Down
PTZ control mode: Move the PTZ down.
Left
PTZ control mode: Move the PTZ left.
Right
PTZ control mode: Move the PTZ right.
Contrarotate
Zoom Out (ZOOM-)
Clockwise Rotate
Zoom In (ZOOM+)
With the joystick moving in different ranges, the PTZ moves with different speeds that can divide
in 64 levels of speed.

User Manual of IPKB-1005KI Keyboard
8
Chapter 3 Keyboard Application
3.1 USB Keyboard Mode
3.1.1 Setting Keyboard Mode
Press and hold the key Window/Channel for more than 5s, and the keyboard will auto switch its
mode. If the single indicator is on, it implies that it is in USB keyboard mode.
3.1.2 Keyboard Control
USB keyboard mode supports window switch between client live view interface and video wall
interface, focusing window channel switch and PTZ control functions. The buttons F1, F2 and F3
can be set as functions like previous, next, preset, etc. according to certain needs and it supports
capturing and recording functions in the live view interface.
1. Shortcut Switch:
Click the button Window/Channel in the main live view interface or video wall interface, and the
window indicator will light. Click the number Iand the OK button, and it will switch to the
corresponding window. If the client supports camera switch function, you can click the button
Window/Channel and the indicator will light; then you click the number Jand the OK button to
switch the channel Jto window I.
Example: You can input number 504 or 0504 with the OK button as the figure above to switch to
the sub window 4 of window 5.

User Manual of IPKB-1005KI Keyboard
9
The input number I can be at most 4-digit number;
When the input number Iis 1-99, it implies the number of the selected window. It can be at
most 99 windows;
When the input number I is 1112, it implies the sub window 12 of window 11. When the input
number is 3-digit or 4-digit, the last two numbers implies sub window number, and the first one or
two numbers implies the window number. If the input number is 101, the selected window is sub
window 1 of window 1; if the input number is 0016, the selected window is window 16.
When the input number Iis hundreds (e.g., 100,200), the input number is invalid and the client
will not respond.
The window number and sub window number are counted from left to right and from top to
bottom.
2. Joystick: After selecting window in live view or video wall interface, move the joystick to
control the direction and zoom in or zoom out the channel of window. The moving speed of
dome is related to the movement of the joystick.
3. F1, F2, F3:
Click Tool-> System Configuration-> Keyboard and Joystick-> USB Keyboard on client and
then configure the corresponding shortcut keys of F1, F2, and F3. Select the window in live view
mode or video wall interface and operate according to each shortcut.
It supports shortcut settings as Speed Up, Speed Down, Focus, IRIS, Turn on the light,
Turn on the windshield wiper, Auto-Scanning,Auxiliary Focus, Lens Initialization, Previous,
Next, Preset, Patrol, Pattern;

User Manual of IPKB-1005KI Keyboard
10
Speed up, Speed down: Reserved;
Previous, Next: Select the previous window or the next window during the window switch;
switch to the previous or next window of channel during the channel switch.
4. Capture, Recording:
Click Tool-> System Configuration-> File; configure the corresponding saving path of pictures
and video files. Select the window in the live view interface and press the button on the right side
of the joystick to capture or press the button on the left side to record. The pictures and videos will
be saved to the configured saving path.
3.2 USB Joystick Mode
Press and hold the button Window/Channel for 5s, and the keyboard automatically switches its
mode. When the indicators both light, it shows that the device is in USB joystick mode.
3.2.1 Keyboard Parameter Settings
It supports PTZ controlling, calling preset, patrol and pattern of client live view interface under
USB joystick mode. It supports capturing and customizing key from key 1 to key 15.

User Manual of IPKB-1005KI Keyboard
11
Click the Tool-> System Configuration-> Keyboard and Joystick-> USB Joystick on client and
then configure the corresponding shortcut keys of number 1~15. Select the window in live view
mode interface and operate according to each shortcut.
It supports shortcut settings as Speed Up, Speed Down, Focus, IRIS, Preset, Patrol, Pattern,
etc.;
Live view PTZ switch: It indicates that the joystick is for operating the window’s corresponding
channel PTZ control or is for different window switch. Click the shortcut key in client live view
mode; it will prompt in the lower right corner in the desktop that the current USB joystick is set to
be PTZ control mode, indicating that the joystick is for controlling PTZ currently. Click the
shortcut key again and it will prompt that the current USB joystick is set to be window switch
mode, indicating that the joystick is for selecting different windows live view.
Number 10: Represents button 0 of USB keyboard;
Number 11: Represents button Record in the left of the top of USB keyboard;
Number 12: Represents button Capture in the right of the top of USB keyboard;
Under USB joystick mode, custom keys support number 1-15, as corresponding to
number 0-9, left button and right button on the joystick, F1-13, F2-14, and F3-15. The buttons
Enter and Switch are not available.

User Manual of IPKB-1005KI Keyboard
12
3.2.2 DVR/NVR Control
Make sure the keyboard is in USB joystick mode.
1
2
4
6
3
5
7 8
Table 1. 3 Description of Keyboard
Index
Name
Description
1
0 to 9 Number
Keys
(same with the
number keys on
the DVR/NVR
control panel)
Press to select displayed channel images corresponding with
the selected number keys in live view or PTZ control;
Input numbers or characters in the condition of character
editing;
Select channels in all-day playback.
2
Enter (same
with Enter key
of DVR/NVR)
Confirm operation of menu mode;
Check the checkbox and ON/OFF shift;
Start/pause in playback; frame forward in single frame play;
Pause/recover auto patrol in auto patrol live view.
3
Switch
Long press for 3 to 5 seconds to switch between joystick mode
and keyboard access mode of IPKB-1005KI keyboard; main menu
interface can be directly entered in joystick mode.
6
F1 (same with
F1 key of
DVR/NVR)
Check all list;
Control light in PTZ control;
Switch between Reverse and Forward in playback.
F2 (same with
F2 DVR/NVR)
Switch between property pages of menu;
Switch channels in synchronous playback.
F3
Multi-camera switch.
7
Joystick
Clockwise rotation for Zoom + and counterclockwise rotation
for Zoom -;
Press the left button on the top of the rocker to enter PTZ
control interface directly;
Press the right button on the top of the rocker to exit and return
to the previous menu;
The 4 directions (up, down, left, right) of the rocker control
respectively the operation of the 4 directions of PTZ control.

User Manual of IPKB-1005KI Keyboard
13
The functions of buttons may be different when IPKB-1005KI keyboard controls different
types of DVR devices. Detailed information is in accordance with real devices.

User Manual of IPKB-1005KI Keyboard
14
Appendix1: Specification
Model
IPKB-1005KI
Compatible System
Window XP/7/8/8.1
Interface Type
USB 2.0, DirectX
Control
Joystick (3-axis control, rotating zoom)
Dimensions
167×177.5×116(mm)
Operating Temperature
-10 ºC to +55 ºC
Operating Humidity
10% ~ 90% (Non-condensing)
Power Supply
5V DC via USB
Consumption
≤5W

User Manual of IPKB-1005KI Keyboard
15
Appendix2: Device Upgrade
Steps:
1. Upgrade Preparation:
When the drive is installed, access the keyboard USB with the PC, it will prompt that
device is discovered and auto load the corresponding drive.
Make sure the keyboard is in USB keyboard mode before upgrading the device. If the single indicator
on the panel does not light, press and hold the Window/Channel key for more than 5 seconds to
switch to the USB keyboard mode.
2. Search Device:
Open the KeyBoardDemo software and click refresh device, the device list will display
the current accessed keyboard. (The client should be closed). Remember the
corresponding serial number (e.g., COM3) of the keyboard in the list, which will be
used for upgrading the device in the following steps.
3. Start Upgrading
Before sending the command, make sure your PC has installed the serial port tool with Send Ymode
functions, e.g., SecureCRT should be 6.5.0 or a later version.
Select one device and click to upgrade it. It will prompt the window as below after the
upgrade order is sent from the DEMO. Click YES.

User Manual of IPKB-1005KI Keyboard
16
4. Send Upgrade File
It takes the serial port tool SecureCRT as the example to upgrade the device.
1) Open serial port tool SecureCRT 6.5, select the corresponding serial port of the
device (as shown in step2) and configure the port parameters (baud rate: 115200,
data bit:8, parity: none).
2) It will print C continuously and the upgrade file can be sent directly.
3) Click Send Ymodem under the menu Transfer to enter the path choosing page of
upgrade patch as shown below:

User Manual of IPKB-1005KI Keyboard
17
4) Select the upgrade patch in the path choosing page and double click it to add it to
the red box as shown in the picture below, click OK to start upgrading it:
5) It will pop up the words as shown in the picture below after the upgrade is
processed successfully.

User Manual of IPKB-1005KI Keyboard
18
When the upgrade is accomplished, please close the current serial port and reboot the
keyboard.
If the upgrade is failed, the digital tube of the keyboard will light always. Reboot the
keyboard, open the serial port tool and start to upgrade (step 4).
Table of contents
Other Securitytronix Keyboard manuals
Popular Keyboard manuals by other brands

A4Tech
A4Tech RFKB-25 quick start guide

R-Go
R-Go Compact manual

Silvercrest
Silvercrest STMS 2017 A1 User manual and service information

Steren
Steren RM-325 instruction manual

Logitech
Logitech 920-001176 - Pro 2800 Cordless Desktop Wireless... quick start guide

Razer
Razer BlackWidow Tournament Edition Chroma V2 Master guide