SEIF SAGE Series User manual

12
www.self-electronics.com www.self-electronics.com
INSTRUCTION MANUAL
Dimensions: (Inches/mm)
Specifications：
Tools:
SAGE-LX-24V
SAGE-LX-24V/SAGE M-LX-24V
24VDC
Rated
Input
Mode PowerLength Minimum Mounting
Space(LXWXH)
(L+1/2”)X9/16"X9/16"
((L+12)X15X15mm)
ta Max. Linkable
Length
-20°C~35°C
(-4~95°F)
9/16”xX+1” X/7W
SAGE FROST-LX-24V
SAGE FROST-LX-24V/SAGE FROST M-LX-24V
24VDC (L+1/2”)X9/16"X13/16"
((L+12)X15X20mm) -20°C~35°C (-4~95°F)
9/32”xX+1” 2xX/21W
4.8m
SAGE M-LX-24V 24VDC (L+1/2”)X9/16"X9/16"
((L+12)X15X15mm) -20°C~35°C (-4~95°F)
9/16”xX+1” X/7W 4.8m
3.6m
SAGE FROST M-LX-24V 24VDC (L+1/2”)X9/16"X13/16"
((L+12)X15X20mm) -20°C~35°C
(-4~95°F)
9/32”xX+1” 2xX/21W 3.6m
Pencil Screwdriver
ATTENTIONS
Read these instructions completely and carefully.
• Read the instruction carefully before installation，non-observance of this instruction may cause damage
to the product or hurt to human body. The installation must be carried out by a qualified electrician in
accordance with local or national codes.
• Cut off the power supply before installation and maintenance !
• Regularly check the light source , the LED power supply, the cord and other accessories. If any part is
damaged, the product should not be used.
• The product is only for indoor and dry location. Clean the product with a damped cloth (no dripping
water), preferably anti-static.
• Do not stare into LED beam.
Ruler
SERIES: SAGE/SAGE M
Accessories:
0° mounting clip
X1
45° mounting clip
(For SAGE-LX-24V,
SAGE FROST-LX-24V use only)
X1
0° magnet mounting clip
X1
45° magnet mounting clip
X1
Clip 1 Clip 2
L 1/2”(13.4mm)
1/2”(13mm)
19/32”(15mm)
1/2”(13mm)
SAGE FROST-LX-24V/SAGE FROST M-LX-24V
(Interconnected version)
L3/16”(5mm)
1/2”(13mm)
9/32”(7mm)
1/2”(13mm)
* X: The quantity of LEDs, will be multiples of seven.
L: The maximam length of the luminaire is up to 90-9/16”
(2300mm) .
SAGE-LX-24V/SAGE M-LX-24V
(Interconnected version)

(For SAGE-LX-24V, SAGE FROST-LX-24V)
(For SAGE-LX-24V, SAGE FROST-LX-24V)
34
www.self-electronics.com www.self-electronics.com
Mounting clip installation:
1
2
1
2a
Non-magnetic mounting installation
Magnetic mounting installation:
(For SAGE M-LX-24V, SAGE FROST M-LX-24V)
2b
2/3L
2/3L
Linkable installation:

56
www.self-electronics.com www.self-electronics.com
1
SELF Electronics Co.,Ltd.
No. 1345 JuXian Road, Ningbo Hi Tech Park, Ningbo, China 315103
Installation method of free cut:
2
3
Step 1: Remove the end cap without wire, and draw out the light shade.
Step 2: Cut out the right shape according to the dotted line on the plate.
Remember to reserve the wire terminal.
Step 3: Install the right light shade and end cap.
08/08/2019
cuttable