Seiko Presage SRE010J User manual

INSTRUCTION MANUAL FOR WATCH CALIBRE
2R05

2R05 / 2R06 NSY2R0C1-A2109 M-23
2R05 / 2R06
INSTRUCTIONSMECHANICAL WATCH
https://www.seikowatches.com/
日本語 ..................................................
English ................................................
1
JA
1
EN
Deutsch / Français / Italiano / Español /
Pусский язык / / Português /
䬁Ổᶮ㔈 /䷂橕ᶮ㔈 / 㭛๸⧄ /
そのほかの言語の取扱説明書は、パソコンや
スマートフォンから当社ホームページ内の
「カスタマーサービス」>「取扱説明書ダウンロード」
にアクセスいただき、ご覧ください。
Please refer to the Instruction Manuals
of other languages by accessing
"Customer Service"→ "Instruction"
on our Website from PC or Smartphone.

Thank you very much for choosing a SEIKO watch.
For proper and safe use of your SEIKO watch,
please read carefully the instructions in this
booklet before using it.
Keep this manual handy for easy reference.
* Length adjustment service for metallic bands is available at the retailer from
whom the watch was purchased. If you cannot have your watch repaired by
the retailer from whom the watch was purchased because you received the
watch as a gift, or you moved to a distant place, please contact SEIKO
CUSTOMER SERVICE CENTER. The service may also be available on a
chargeable basis at other retailers, however, some retailers may not undertake
the service.
* If your watch has a protective film for preventing scratches, make sure to peel
it off before using the watch. If the watch is used with the film on it, dirt, sweat,
dust, or moisture may be attached to the film and may cause rust.
EN 1
CONTENTS
1 HOW TO USE
Handling cautions ............................................ 3
Mechanical watch characteristics
(Hand-wound, auto-wound) ............................. 7
Names of the parts and their functions ............ 8
Crown ............................................................ 10
How to wind the mainspring .......................... 11
How to set the time and date (2R05) ............. 13
Date adjustment at the end of the month ... 16
How to set the time, date, and day of the week
(2R06) ........................................................... 17
Date adjustment at the end of the month ... 20
2 TO PRESERVE THE QUALITY OF YOUR
WATCH
Daily care ...................................................... 21
Performance and type ................................... 22
Lumibrite ....................................................... 23
Water resistant performance ......................... 24
Magnetic resistant performance .................... 25
Band .............................................................. 27
How to use tri-fold type clasp for leather band
(Special clasps) ............................................. 30
How to use an easy adjust type clasp ............ 36
After sales service ......................................... 39
Accuracy of mechanical watches .................. 41
Troubleshooting ............................................ 43
Specifications ................................................ 45
EN 2
Handling cautions
bWARNING
Please note that there is a risk of serious consequences such as severe injury if the following
safety regulations are not strictly observed.
Immediately stop wearing the watch in following cases:
○ If the watch body or band becomes edged by corrosion etc.
○ If the pins protrude from the band.
* Immediately consult the retailer from whom the watch was purchased or SEIKO CUSTOMER SERVICE
CENTER.
Keep the watch and accessories out of the reach of babies and children.
Care should be taken to prevent a baby or a child accidentally swallowing the accessories.
If a baby or child swallows the battery or accessories, immediately consult a doctor, as it will be
harmful to the health of the baby or child.
EN 3
1
HOW TO USE
bCAUTION
Please note that there is a risk of minor injury or material damage if the following safety
regulations are not strictly observed.
Avoid the following places for wearing or keeping the watch:
○Places where volatile agents (cosmetics such as polish remover, bug repellent, thinners etc.) are
vaporizing
○ Places where the temperature drops below
5°C or rises above 35°C for a long time
○ Places affected by strong magnetism or static
electricity
○ Places affected by strong vibrations
○ Places of high humidity
○ Dusty places
If you observe any allergic symptoms or skin irritation
Stop wearing the watch immediately and consult a specialist such as a dermatologist or an allergist.
Other cautions
○ For adjusting the length of the metallic band, specialized knowledge and expertise are necessary.
Therefore, in such a case, contact the retailer from whom the watch was purchased. If you attempt
to adjust the metallic band, injury may occur to your hand or fingers, or parts of the band may be
lost.
○ Do not disassemble or tamper with the watch.
○ Keep the watch out of the reach of babies and children. Extra care should be taken to avoid risks
of any injury or allergic rash or itching that may be caused when they touch the watch.
○ If your watch is of the fob or pendant type, the strap or chain attached to the watch may damage
your clothes, or injure the hand, neck, or other parts of your body.
EN 4
1
HOW TO USE

bWARNING
Do not use the watch in scuba diving or saturation diving.
The various tightened inspections under simulated harsh environment, which are
usually required for watches designed for scuba diving or saturation diving, have
not been conducted on the water resistant watch with the BAR (barometric
pressure) display. For diving, use watches specifically designed for diving.
bCAUTION
Do not pour running water directly from faucet.
The water pressure of tap water from a faucet is high enough to degrade the water
resistant performance of a water resistant watch for everyday life.
EN 5
1
HOW TO USE
bCAUTION
Please note that there is a risk of minor injury or material damage if the following safety
regulations are not strictly observed.
Do not turn or pull out the crown when the watch is wet.
Water may get inside of the watch.
* If the inner surface of the glass is clouded with condensation or water droplets appear
inside of the watch for a long time, the water resistant performance of the watch is
deteriorated. Immediately consult the retailer from whom the watch was purchased or
SEIKO CUSTOMER SERVICE CENTER.
Do not leave moisture, sweat and dirt on the watch for a long time.
Be aware of a risk that a water resistant watch may lessen its water resistant
performance because of deterioration of the adhesive on the glass or gasket, or
the development of rust on stainless steel.
Do not wear the watch while taking a bath or a sauna.
Steam, soap or some components of a hot spring may accelerate the
deterioration of water resistant performance of the watch.
EN 6
1
HOW TO USE
Mechanical watch characteristics (Hand-wound, auto-wound)
• This is a mechanical watch powered by a spring.
• To use it from a stopped state, turn the crown 20 turns by hand to wind up the spring before starting the
watch.
• Although the accuracy of quartz watches is measured in differences over months or years, in mechanical
watches it is measured in differences per day (i.e., the amount the watch speeds up or slows down in a
single day).
• Additionally, mechanical watches are subtly affected by the conditions in which they are used (e.g.,
duration worn, temperature, arm movement, the amount wound, etc.) ; thus, the amount of error is not
constant.
• When affected by a strong magnetism from outside, a mechanical watch may lose/gain time temporarily.
The parts of the watch may become magnetized depending on the extent of the effect. In such a case,
consult the retailer from whom the watch was purchased since the watch requires repair including
demagnetizing.
EN 7
1
HOW TO USE
Names of the parts and their functions
■ 2R05
1Minute hand
2Hour hand
3Seconds hand
4Date
5Crown
• Normal position (not locked): Wind up the
watch (hand-wound)
• First click position: Time difference
adjustment/Date setting
• Second click position: Time setting
* The position and design of the display may vary depending on the model.
1
4
5
2
3
EN 8
1
HOW TO USE

■ 2R06
1Minute hand
2Hour hand
3Seconds hand
4Date and day of the week
5Crown
• Normal position (not locked): Wind up the
watch (hand-wound)
• First click position: Date and day of the week
setting
• Second click position: Time setting
* The position and design of the display may vary depending on the model.
1
4
5
2
3
EN 9
1
HOW TO USE
Crown
There are two types of crowns, a normal crown and a screw down crown.
Please check the type of the crown of your watch.
While
pressing the
crown in, turn it
in the direction
indicated by
the arrow.
The
crown
turns.
The crown
does not
turn.
Normal crown
Pull out the crown and operate it.
Screw down crown
Unlock the crown before
operating it.
After operating the crown,
lock it.
Unscrew
Rotate while
pressing
the crown in.
* By locking the crown by screw, a screw down crown can prevent malfunction and increase water resistance.
* Be careful not to screw the crown in by force as it may damage the slots of the crown.
EN 10
1
HOW TO USE
How to wind the mainspring
• This is an automatic mechanical watch with a manual winding mechanism.
• When the watch is worn on the wrist, the mainspring is wound automatically through normal wrist
movement. The watch can also be wound up by turning the crown.
• To start the watch after it stops completely, wind it up either by turning the crown or swinging it from side
to side until the seconds hand starts moving. Then, set the time and date before putting the watch on
the wrist. To wind up the watch, turn the crown clockwise slowly. The watch cannot be wound by turning
the crown counterclockwise. In this way, the watch can be wound up fully. Furthermore, turning the crown
further will not break the spring.
* For the watch with screw down crown, please unlock the crown before operating it and be sure to lock the crown
after operating it.
• Once the watch is wound up fully, it operates for about 40 hours.
EN 11
1
HOW TO USE
* If the watch is used without being wound up fully, gain or loss of time may result. To avoid this, wear the watch for
more than 8 hours a day. If the watch is used without being worn on the wrist, be sure to wind it up fully every day
at a fixed time.
* If you use a watch that has stopped with the mainspring unwound, winding the mainspring with the crown will not
start the watch immediately. That is because the mainspring torque or force is low at the beginning of its winding
due to the characteristics of mechanical watches. The seconds hand will start to move when a certain degree of
torque is reached after the mainspring has been wound up. However, swinging the watch from side to side to
forcibly turn the balance can start the watch sooner.
EN 12
1
HOW TO USE