Seiko 8V36 User manual

You are now the proud owner of a SEIKO Analogue Quartz Watch
Cal. 8V36. For best results, please read the instructions in this booklet
carefully before using your SEIKO Analogue Quartz Watch. Please
keep this manual handy for ready reference.
Usted es ahora un honrado poseedor del reloj SEIKO analógico de cuarzo
Cal. 8V36. Para obtener de él los mejores resultados, lea las instrucciones
del presente folleto con cuidado antes del uso de su reloj SEIKO
analógico de cuarzo. Guarde este manual para fácil referencia.

2
English
ENGLISH
CONTENTS
Page
TIME SETTING ......................................................................................................... 4
ULTRASONIC ALARM ............................................................................................. 5
NOTES ON ULTRASONIC ALARM .......................................................................... 7
BATTERY LIFE INDICATOR ..................................................................................... 7
BATTERY CHANGE.................................................................................................. 7
SPECIFICATIONS..................................................................................................... 9
✩
For the care of your watch, see “TO PRESERVE THE QUALITY OF YOUR
WATCH” in the attached Warranty Booklet.

3
English
CAL. 8V36
Time indicated by hour, minute,
second and 24-hour hands
Alarm indicator
Shows the alarm engagement/
disengagement.
Ultrasonic alarm
Ultrasonic motor runs at a high
speed to vibrate the watch at the
designated time.

4
English
TIME SETTING
● Pull out CROWN when the second hand is at the 12
o’clock position and push it back in accordance with a
time signal.
● Check that the 24-hour hand is correctly set.
Pull out and turn to set the
time. Then, push in.
When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired time and then turn it
back to the exact minute.
➠
➠

5
English
ULTRASONIC ALARM
● To set the alarm time more precisely, turn the alarm hand
counterclockwise.
Turn to set the alarm
hand to the desired
alarm time.
Then pull out.
To set the alarm time less than 2 hours ahead of the current time, first advance the alarm hand more than
2 hours ahead of the current time and then turn it back to the exact alarm time.