Selecta PF27 User manual

Instruction Manual
MANPF27 REV A 02/05/2019
12V OIL CHANGE PUMP KIT
PF27
VICTORIA (HEAD OFFICE)
Telephone: [phone]
Fax: [phone]
www.silvan.com.au
NEW ZEALAND
Hamilton, New Zealand
Telephone: [phone]
Fax: [phone]
www.silvannz.co.nz
SILVAN AUSTRALIA PTY. LTD.
ABN 48 099 851 144

Device description:
Model Number:
Input Voltage:
Rated Current:
Max Flow Rate: Motor Oil (40 - 60°C):
Suction Hose:
Delivery Hose:
Power Cord:
Measurements:
Weight:
Maximum Delivery Height:
Oil Pump
PF27
12V DC
Approx. 5A
Approx. 1.5 L/min
1.2m x 6mm outside diameter
1.6m
1.5m
85 x 130 x 125mm (H x L x W mm)
0.85kg
0.7m
Warning! Do not use pump for petrol or flammable liquids, danger of explosion.
Warning! This oil pump is for domestic use only. Do not use for commercial purposes.
Warning! Do not pump water.
Warning! Operate only within the temperature range of 0 - 40°C.
Warning! Place the oil suction pump on a firm, secured surface as pump vibrates and may
move.
Warning! Make sure the engine is level, otherwise full suction might not be possible.
Warning! Always use hose clamps or pump may not prime or connection may leak.
Warning! Never leave unattended during operation.
Specifications
Warnings

•Push the suction hose onto the suction tube socket and connect hose clamp.
•Push drain hose onto the drain tube socket.
Assembly
Hose
Clamp
Inlet Hose
6mm Diameter
Hose
Clamp
Outlet Hose
13mm Diameter
Direction of Flow

1. Insert the suction hose into the engine. This is normally done via the dipstick or oil
refill cap. The outside diameter of the suction hose is 6mm. When inserting suction
hose into the engine do not use any force.
2. The outlet hose should feed to a tank or container for waste oil.
3. The alligator clips on the power lead are then connected to a 12V batter. Red to
positive and black to negative. There is an on/off switch on the back of pump.
4. For best results change the oil on the engine while the engine is still warm. This helps
to remove all the contaminents and warm oil will flow faster and more easily
through the oil change pump.
Operation
On/Off Switch