Sena Parani M10 User manual

1.3.0
USER’S GUIDE
ENGLISH
Motorcycle INTERCOM

2
GETTING STARTED
Update this product for free with the latest
firmware to fully enjoy the new advanced
features built into this product. Visit parani.com
to see how to update your product.
PRODUCT FEATURES
Blast your favorite tunes, talk over the intercom
with your buddies, hear directions from your
GPS and more, all through your M10 Bluetooth®
headset. With built-in Bluetooth® capabilities,
HD Intercom, technology has never felt so
minimal or freeing.
Bluetooth
®
Integrated
Intercom up to 1 km (0.6 mi)*
Four-way Intercom
LCD Display
Versatile Jog Dial
Firmware Upgradeable
*in open terrain
parani.com

3
TABLE OF CONTENTS
3.3 Charging the Headset 11
3.4 Powering On and Off 12
3.5 Adjusting the Volume 13
3.6 Downloadable Parani Software 13
3.6.1 Parani Device Manager 13
4 PAIRING YOUR HEADSET WITH
OTHER BLUETOOTH DEVICES 13
4.1 Phone Pairing 14
4.1.1 Initially Pairing the M10 14
4.1.2 Pairing When the M10 is Turned Off 15
4.1.3 Pairing When the M10 is Turned On 15
4.2 Second Mobile Phone Pairing 16
5 MOBILE PHONE USAGE 16
5.1 Using Phone Functions 16
1 BEFORE STARTING 5
1.1 Package Contents 5
1.1.1 Wired Boom Microphone Type 5
1.1.2 Wired Microphone Type 6
2 INSTALLING THE HEADSET ON
YOUR HELMET 7
2.1 Using the Clamp 7
2.2 Using the Glued Surface Mounting
Adapter 7
2.3 Installing the Speakers 8
2.3.1 Wired Boom Microphone Type 8
2.3.2 Wired Microphone Type 9
3 GETTING STARTED 11
3.1 Button 11
3.2 LCD Display 11

4
8 GENERAL SETTINGS 25
8.1 Function Priority 25
8.2 Configuration Menu 25
8.2.1 Assigning Speed Dial 27
8.2.2 Voice Prompt (Default: Enable) 28
8.2.3 Delete All Pairings 28
8.3 Firmware Upgrades 28
9 TROUBLESHOOTING 29
9.1 Fault Reset 29
9.2 Factory reset 29
5.2 Speed Dialing 17
5.2.1 Assigning Speed Dial Presets 17
5.2.2 Using Speed Dial Presets 17
6 STEREO MUSIC 18
7 BLUETOOTH INTERCOM 19
7.1 Intercom Pairing 19
7.2 Two-way Intercom 20
7.2.1 HD Intercom 20
7.3 Multi-Way Intercom 21
7.3.1 Start Three-way Intercom 21
7.3.2 End Three-way Intercom 22
7.3.3 Start Four-way Intercom 23
7.3.4 End Four-way Intercom 24

5
M10
1 BEFORE STARTING
1.1 Package Contents
1.1.1 Wired Boom Microphone Type
• Headset Main Unit
Jog Dial
Multi-function
Button
DC Power Charging &
Firmware Upgrade Port
Speakers and
Microphone
Port
LCD Display
• Speakers and
Wired Boom
Microphone
Wired Boom Microphone
• Clamp
• Glued Surface Mounting Adapter
• Speaker Sponge (2)
• Microphone Sponge (2)
• Hook and Loop Fasteners
for Speakers (2)
• USB Power & Data Cable
(USB-C)

6
M10
• Speakers and
Wired Microphone
Wired Microphone
• Clamp
• Glued Surface Mounting Adapter
• Speaker Sponge (2)
• Hook and Loop Fasteners
for Speakers (2)
• Hook and Loop Fasteners
for Wired Microphone
• USB Power & Data Cable
(USB-C)
1.1.2 Wired Microphone Type
• Headset Main Unit
Jog Dial
Multi-function
Button
DC Power Charging &
Firmware Upgrade Port
Speakers and
Microphone
Port
LCD Display

7
M10
2. Insert the headset into the helmet using the
clamp.
2.2 Using the Glued Surface
Mounting Adapter
1. Insert the main module into the glued
surface mounting adapter using the two
connecting slots on the back.
2 INSTALLING THE HEADSET ON
YOUR HELMET
Before installing the headset, you need to choose
between the clamp and the glued surface mounting
adapter. To install the headset to the helmet, follow
the steps below:
2.1 Using the Clamp
1. Insert the main module into the clamp using
the two connecting slots on the back.

8
M10
2.3 Installing the Speakers
2.3.1 Wired Boom Microphone Type
If you want to install speakers into the headset,
follow the steps below:
1. Remove the cover of the adhesive sticker of
the hook and loop fasteners for speakers.
2. Place the sticker on the helmet.
3. Place the speaker on the hook and loop
fasteners.
2. Remove the cover of the adhesive sticker
on the back to glue the headset on to the
helmet.
3. Attach the headset on the left side of the
helmet.

9
M10
2.3.2 Wired Microphone Type
If you have a full face helmet, you can use the wired
microphone.
1. Remove the cover of the adhesive sticker of
the hook and loop fasteners for speakers.
2. Place the sticker on the helmet.
3. Place the speaker on the hook and loop
fasteners.
4. Insert the Speakers and Microphone plug
into the headset.
Note:
• If your speakers are too close to your ears and
your ears are uncomfortable, you can attach a
Speaker Sponge to the front of the speaker.
• Make sure that the microphone is located
properly close to your mouth when you wear the
helmet. Adjust the direction of the microphone
so that the n side of the microphone is facing
outward, away from your lips.
Fin

10
M10
6. Insert the Speakers and Microphone plug
into the headset.
4. Peel off the cover of the hook and loop
fastener for wired microphone to expose the
adhesive tape. Then, attach the hook and
loop fastener on the inside of the helmet’s
chin guard.
5. Attach the wired microphone to the hook
and loop fastener for wired microphone.