SENBITEC DEESSE PREMIUM SBT-MLLT-PM User manual

USER MANUAL
2F,46-24,LS-ro 91beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, Korea
2F,46-24,LS-ro 91beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, Korea
Manufactured by Senbitec
Distributed by The Artistry Group Limited
Shop 302. Third Floor. Landmark Atrium.
15 Queen's Road Central. Hong Kong.
[email protected]

0203
CAUTIONS
Contents
1. Cautions
2. Components
3. Controller
3
9
10
6. Specifications 14
4. Instructions for use
Deesse operation
Sound setting
11
11
12
Warning : warning indicates safety requirements that may result in
death or serious injuries, if not followed properly.
Caution : caution indicates hazardous situations that may result in
injuries or product damage.
Use the exclusive power cord and adapter.
Failure to use the exclusive power cord and adapter may
result in product damage, electric shock, and fire.
The power supply of this adapter is 100-240v.
Inappropriate usage may result in electric shock or injuries.
To disconnect the power cord, pull it out by the
adapter. Do not drag the cord itself.
Damage in the power cord may result in electric shock, fire,
or injuries.
Make sure that the power cable is not entangled
and do not leave any stuff on top.
It may cause fire.
Do not connect or disconnect the power cord
as well as the product itself with wet hands.
It may result in electric shock or injuries.
Warning Safety requirements for the use
5. Modes
12

0405
Do not place the device on the unstable areas.
It may drop and cause malfunctioning or deformation.
Avoid any areas with dust or water.
It may cause electric shock or fire.
In case of any contact with high levels of moisture
or water, unplug at the mains immediately.
Operating it wet may cause damage, electric shock,
and injuries.
Do not use in places with water contact such as
sauna, shower, swimming pool etc.
It may cause electric shock or fire.
Unplug the power cable first before wiping out
the product.
It may cause electric shock.
If any strange sound, smoke, or smell is detected
from the product, immediately unplug and
contact place of purchase. Do not disassemble
the product randomly.
It may cause electric shock or fire.
Do not intentionally modify or change the
power cable.
It may cause damage, electric shock, or fire.
Do not connect the power cable to any loose
sockets.
It may cause electric shock or fire.
If any damages in power cable found, stop using
and contact place of purchase.
It may cause electric shock, short circuit, and fire.
Do not place the product nearby a heater or
a thermal device.
It may cause changes in color/form or fire.
Do not unplug the power cable or mask cable
during the operation.
It may cause damage.
Do not place the product near the combustible
materials (spray, oil, gas, etc).
It may cause explosion or fire.
Unplug the power cable if not in use for a long
time.
It may cause electrical fire due to short circuits.
Spray, oil
Warning Safety requirements for the use Warning Safety requirements for the use

06
Avoid any severe shock on the product.
It may cause damage.
Do not use the product for purposes other than
facial skin care.
Store away from direct sunlight or heat.
It may cause damage.
Do not use in areas with unstable voltage.
It may cause damage.
Do not place any magnet nearby the product.
It may cause malfunctioning.
Wear eye guard before placing the mask on face.
Connect the mask cable first before turning on
the power.
For cleansing, do not spray any water or volatile
materials but gently wipe out with a dry cloth.
Using benzene, thinner, etc may result in product damage.
If you have taken any light-sensitive medications
or cosmetics, do not use.
It may cause hot flush or pigmentation.
Do not use the product if you were exposed to the
sunlight for a long time from outdoor activities.
Read the user manual thoroughly before use.
Recommended to use for 10 minutes and try not to use for more than 30
minutes per application.
Place the mask on face first before starting the operation and you may
experience dazzling due to LED light exposure.
Do not look directly at the LED light when it is in operation.
Do not use if you have any tingling or irritation from tanning.
Do not use for patients with diabetes or any skin problems from disease.
Do not use for patients who had radiation treatment or chemotherapy for
recent 3 months.
Do not use for patients with any skin disease such as skin cancer.
Freckles may become more visible from the toning effect after the use.
Too much application of 415nm (blue) may cause pigmentation depending on
the skin condition. Recommended time for use is 10 minutes per application
-
-
-
-
-
-
-
-
-
Caution Safety requirements for the use Caution Safety requirements for the use
-
1707

230817
COMPONENTS* The images may look different from the actual
products.
Stand(**optional)
Mask connection Adapter connection
Mask Controller Adapter
Eye GuardRetaining Strap
09
User Manual
Caution Safety requirements for the use
Store away from direct sunlight
or areas with high temperature
and humidity.
Keep the contact surface of mask
clean after each use.
When cleaning, wipe it out with
a soft dry cloth.
Store it safely, away from a strong
impact or pressure which may
result in the damage.
Keep it out of reach of children.
Storage
If you are having a skin treatment or using photosensitizer.
If you had decortication.
Avoid using acne medication (such as Accutane), whitening
treatment, Retin A ointment, or any cosmetics containing
retinol from 7 days before use.
If any of the following symptoms appear, decrease the intensity or
number of applications; red spots appearing on surface or soring.
Consult your doctor if any of these symptoms continue.
Consult your doctor immediately if any of blisters or burning appear.
In case of pigmentation, stop the use immediately. This symptom will
disappear in 1~2 weeks. If the symptom continues, please consult
your doctor.
When applying the product after pigmentation, reduce the number
of applications or time duration.
-
-
-
-
-
-
-
Consult your doctor
Before application
During application

11
CONTROLLERINSTRUCTIONS FOR USE1. Deesse operation
4)
Put on the eye guard and then, the mask.
Adjust the strap to make sure that the
mask is placed properly on your face.
5) Press the power button for 2~3
seconds to turn on the device.
1)
Gently wipe out the mask clean before use.
2) Connect the power cable to the controller.
3) Connect the mask cable to the controller.
Power On/Off, Start, Pause Press the button for 2~3 seconds to turn on/off the power.
Set the mode first and press the button shortly to start the operation.
If you wish to pause the operation, press the button shortly.
Intensity ControlPress to select the intensity of light.
The intensity will change from 1 to 2 each time you press the button.
Mode settingPress the button to set the mode.
It will change from M01 to M08 each time you press the button.
/ Time ControlPress / button to change the time in 5-minute interval.
(except Mode 7 and 8)
Mask Cable
Connect the cable from the mask into .
Power Cable Connector for adapter.
Intensity Control DisplayShows intensity of the light.
LED Display
Shows the mode of operation.
Action DisplayLighted when the product is in operation.
Operation TimeShows the time set before operation and remaining time during operation.
6) Press button to set the mode. The
mode will change each time you press
the button and shown on the LCD
display. (Mode 1 to Mode 8)
7) Set the time for each mode by pressing
the Up/Down button. /
Changes in 5-minute interval and up to 60 minutes.
Recommended time for each mode is 15 minutes per application.
For Mode 7 and 8, the time is set to 15minutes and will turn off automatically
once the time is up.
9) After setting mode and time, press the
power button shortly to start the
operation. Then“RUN” will appear on
the LCD screen.
※If kept in pause for more than 10 minutes, it will turn off automatically.
8) If you wish to adjust light intensity, press button.
10)
The controller will turn off automatically
once the time is up.
11) If you wish to pause, press the power
button shortly
10

MODESMode 1 Signs of aging
Helps diminish signs of aging.
Mode 3 Sensitive skin care
Helps soothe skin sensitivity.
Mode 4 Toning care
Brightens and evens out skin tone.
Mode 5 Total care 1
Multi-care function with wrinkle, excess
oil, and Infrared ray (IR) care.
Mode 6 Total care 2
Combination of Mode 1 and Mode
3 with infrared ray (IR).
Mode 7 Total care 3
Combination of Mode 2 and Mode
4 with infrared ray (IR).
Mode 8 IBlemish-prone skin care
Helps soothe and comfort blemish-prone
skin.
Mode 2 Excess oil care
Helps balance shiny and oily skin.
1213
2. Sound setting
1) If you wish to turn off the sound, press the
power button and intensity control button
at the same time.
Sound Mute
Mode M05Mode M01 Mode M06Mode M02Mode M07Mode M03Mode M08Mode M04
Red(630nm) + IR(830nm)
Recommended time 15mins , Maximum setting 30mins
Blue(415nm) + IR(830nm)
Recommended time 10mins , Fixed time 10mins
Yellow(580nm) + IR(830nm)
Recommended time 15mins , Maximum setting 30mins
Green(520nm) + IR(830nm)
Recommended time 15mins , Maximum setting 30mins
Red(630nm) + Blue(415nm) + IR(830nm)
Recommended time 15mins , Maximum setting 30mins
Red(630nm) + Yellow(580nm) + IR(830nm)
Recommended time 15mins , Maximum setting 30mins
Red(630nm) + Green(520nm) + IR(830nm)
Recommended time 15mins , Maximum setting 30mins
Blue(415nm) + Green(520nm) + IR(830nm)
Recommended time 10mins , Fixed time 10mins
Blue + Green (3mins) > Blue + IR (1mins) > Green + IR (1mins)
Red + Green (3mins) > Red + IR (1mins) > Green + IR (1mins)
Red + Yellow (3mins) > Red + IR (1mins) > Yellow + IR (1mins)
Red + Blue (3mins) > Red + IR (1mins) > Blue + IR (1mins)

1415
SPECIFICATIONSProduct name DEESSE PREMIUM LED MASK
Rev. 18-002
Model name SBT-MLLT-PM
DC24V/1A
20W
415nm(Blue), 630nm(Red), 830nm(IR), 580nm(Yellow)
520nm(Green)
LED wavelength
Power consumption
Voltage
Senbitec Co.,LtdManufacturer
KoreaOrigin
2F, 46-24, LS-ro 91beongil, Dongan-gu, Anyang-si, Gyeonggido
Address
The Artistry's top priorities are safety, quality and efficacy. We have total confidence in the
uncompromising reliability of our products hence you can receive 10 years warranty.
1. These warranty terms and conditions will apply in the country in which the sale is made, provided
the order has been properly placed with The Artistry Group Limited.
2. The Artistry provides an extended warranty of 10 years on Deesse Premium Pro from their date of
purchase. From years 1 to 3, Repair work at the factory will be free of charge and covered by The
Artistry. End-user is responsible for all shipping costs. From years 4 to 10, The Artistry will continue
to provide Warranty on the control panel and LED face mask free of charge, excluding parts subject to
wear. For the execution of warranty repairs, an additional cost will be charged to cover labour, plus a
fixed charge to cover any traveling costs, where applicable.
3. The Artistry warranty does not cover: a) changes and damage caused by use of the product for
anything other than its intended purpose. Nor does the warranty cover damage caused through
inappropriate treatment, or damage that arises through unusual environmental effects (extreme
weather conditions, acid, moisture etc.). b) damage caused through maintenance or repair work by the
customer or by third parties; c) damage that occurs during transportation;
4. In the event of claims: you will be asked to provide description of the damage or defect, model
name, order confirmation number or invoice if applicable. The Artistry may refuse to process the
claim if such information are not provided.
Product Warranty Terms