Senco SLS15 User manual

The SLS15 finish stapler from SENCO is both powerful and
lightweight. The ergonomically correct design increases quality
and productivity in a wide variety of applications.
Applications:
Cabinets, soffit, fascia, drawer assembly, picture frames, case
backs, craft assembly
.
Features and Benefits:
• Adjustable depth-of-drive
• Rear exhaust – keeps oil and dust away from the work surface
• Easy-open latch – for quick loading
• Hardened steel driver – for extended life
• Full soft grip – for comfort and control
• Low load indicator – visible fastener indicator
• Available dual action or restrictive fire
• One-year warranty
• Includes case, fitting, oil, hex wrench and fastener rebate
Tool Specifications:
Tool Weight: 2.4 lbs (1.08 kg)
Height: 7.5" (190 mm)
Length: 10" (254 mm)
Staple Capacity: 100
Reg. Operating Pressure: 70-120 psig
Mode of Operation: Available with either Dual Action or
Restrictive Trigger activating mechanisms
Fastener Specifications:
Gauge: 18
Crown: 1/4" (6.35 mm)
Fastener Range: 1/2" – 1"
Finish: Galvanized
The only way to work.®
Safety First.
©2002 SENCO Products, Inc. Litho in U.S.A. www.senco.com
SLS15
ProSeries 18 Gauge Finish Stapler

The only way to work.®
Safety First.
©2002 SENCO Products, Inc. Litho in U.S.A. www.senco.com
Adjustable
Depth-of-Drive
Drives staples to a
consistent and
controllable depth
No-Mar Pad
Protects woodwork
Low Load Indicator
Easy to check fasteners
Easy-Open Latch
For more comfortable
loading
Bottom-Load Magazine
For added convenience
Soft Grip
Gives extra
comfort and
control
Rear Exhaust
Keeps oil and dust
away from work surface
For additional information on how SENCO Fastening Systems will
save you time, reduce costs and increase quality, call your nearest
Authorized SENCO Dealer or Distributor listed in the Yellow Pages
under “Nails,” or call our toll-free Action Line: 1-800-543-4596.
SLS15
ProSeries 18 Gauge Finish Stapler
Rear Bumper
Protects work surface