
Hair Dryer
SHD 7170WH
EN
EN-7
2019 08/2019
USING THE HAIR DRYER
1) Wash your hair using ashampoo and treat it with a conditioner before using the hair dryer; this will make
combing easier. Dry washed hair using atowel and comb it out.
2) Select attachment A1 or A5 and attach it to the hair dryer.
Attachment A1 can be used for quickly hair drying or for forming ahairstyle. When forming ahairstyle, comb
through your hair using abrush or comb and point attachment A1 at the hair strand you are working on.
Use attachment A5 to give volume to your hairstyle. When drying your hair, it is necessary for the pins of the
diuser A5 to point perpendicular to your head and to be touching your scalp. Using slow circular motions,
gradually dry all parts of your hair.
3) Insert the power plug into the an electrical power socket. Use switch A4 to set the desired power level.
Setting switch A4 Power level
0
1
2
3
OFF
Low temperature setting with gentle air flow used to slowly form ahairstyle.
Low temperature setting with fast air flow used to easily form ahairstyle.
High temperature setting with fast air flow used to quickly dry hair.
Ionisation function
After starting your dryer, the ionisation feature activates automatically and creates negative ions.
These neutralise the static charge in your hair and restore the vitality and shine of your hair.
To x your hairstyle in place, press and hold for several seconds the cool air button A3.
Tip:
To make the hairstyle last longer, we recommended the application of special hair products, e.g. hair sprays,
mousse or hair gel.
4) When you nish using the hair dryer, turn it o by moving switch A4 to position 0 and disconnect it from the
power socket. You can store or carry the hair dryer with the handle A7 in the folded position.
CLEANING AND MAINTENANCE
Attention:
Before cleaning the hair dryer, always turn it off and disconnect it from the power outlet.
• Remove any hair that is caught in the air inflow or outflow openings. Turn the grill A6 in the direction of the
open lock symbol marked on the hair dryer. Take off the grill A6 and remove hair from the air inflow opening.
Reattach the grill A6 and turn it in the direction of the closed lock symbol marked on the hair dryer. Check that
the grill A6 is properly attached to the hair dryer.
• To clean the outer surface you can use awiping cloth lightly dipped in asolution of neutral detergent. Wipe dry
the surface that you wiped with the damp cloth.
•
Never submerge the hair dryer in water or any other liquid. Do not use abrasive cleaning products, alcohol,
petrol or similar agents.