Seneca Cloud BOX User manual

MI00419-3-EN INSTALLATION MANUAL 1/2
VPN BOX
CLOUD BOX
DOCUMENTATION
Z-KEY-P
DOCUMENTATION
Z-KEY
INSTALLATION MANUAL
SENECA s.r.l.; Via Austria, 26 – 35127 – PADOVA – ITALY; Tel. [phone] - Fax [phone]
WARNING: The full content of this manual must be read before any operation. The module must only be used by
qualied electricians. Specic documentation is available via QR-CODE shown on page 1.
Electrical and electronic waste disposal (applicable in the European Union and other countries with recycling).
The symbol on the product or its packaging shows the product must be surrendered to a collection centre
authorized to recycle electrical and electronic waste.
The module must be repaired and damaged parts replaced by the Manufacturer. The product is sensitive to
electrostatic discharges. Take appropriate measures during any operation.
PRELIMINARY WARNINGS
The word WARNING preceded by the symbol indicates conditions or actions that put the user's safety at risk.
The word ATTENTION preceded by the symbol indicates conditions or actions that might damage the
instrument or the connected equipment. The warranty shall become null and void in the event of improper use or
tampering with the module or devices supplied by the manufacturer as necessary for its correct operation, and if
the instructions contained in this manual are not followed.
CONTACT INFORMATION
Technical support [email protected] Product information [email protected]
This document is the property of SENECA srl. Copies and reproduction are prohibited unless authorised.
The content of this document corresponds to the described products and technologies.
Stated data may be modied or supplemented for technical and/or sales purposes.

MI00419-3-EN INSTALLATION MANUAL 2/2
MODULE LAYOUT
GENERAL FEATURES
TECHNICAL SPECIFICATIONS
CERTIFICATIONS
https://www.seneca.it/products/vpn-box/doc/CE_declaration
https://www.seneca.it/products/cloud-box/doc/CE_declaration
CERTIFICATIONS 5A; 60W max.
ENVIRONMENTAL
CONDITIONS
Temperature: 0°C – +50°C; Humidity: 30% – 90% non condensing.
Altitude: Up to 2000 m above sea level.
Storage temperature: -10 °C – + 70 °C; Protection rating: IP20
IP ADDRESS
OF FACTORY
The default IP address is congured in DHCP
PROCESSOR Intel Apollo Lake SoC Processor - INTEL CELERON J3455 @1.5GHz
Clock: 1.50GHz;; Turbo Speed: 2.30GHz
CORE NUMBER. Core: 4
COOLING Fanless
MEMORY DDR3 SO-DIMM by 4GB @ 1600MHz
HARD DISK. SSD M.2 da 128GB
POWER INPUT Onboard DC jack
CASE Compact Fanless
FRONT PANEL
REAR PANEL
Dimensions: 185 x 142 x 48 mm, Net weight: 1.3kg
Programming tools, app, manuals, templates, examples, etc. for the product can be downloaded free of charged at
www.seneca.it in the product section.