senses akustik SPARK User manual

INSTALLATION MANUAL SPARK

Senses Akustik | | Installation manual SPARK
Fitting Tool
All our whiteboards are made up of environment-friendly materials, glass enameled, and sheets o
steel. The writing surface is magnetic.
Spark is recommended for short throw projectors only. A special “White board kit” is availabl
as an accessory. This has been developed to t the surface and includes: eraser, markers
penholder, bottle of cleaning uid and magnets.
Important: Assembly is easiest if performed lying down on for example a table or oor.
1Screw Driver 2Screw

Senses Akustik | | Installation manual SPARK
Assembly Inst uctions
Step A: Attach castors to the metal legs and metal legs to th
glass-board structure.

Step B: Tighten the metal legs to the structure with a screwdriver.
View the nal product ready to use after successfull
executingallthesteps.

Senses Akustik | | Installation manual SPARK
Maintenance Instructions
1. Only whiteboard pens must be used. Scripture can be erased with 
standard eraser or paper towel.
2. Frequently used whiteboards should be cleaned once a week wit
clean sponge or cloth and warm water. Soap solutions or similar mus
not be used.
3. If the board is heavily soiled then cleaning uid shall be used. It is ver
important that you then wash away the residue of the cleaning solutio
with warm water and wipe dry afterwards.
Wait about 15 minutes so that the painting is absolutely dry. Th
slightest moisture makes the board's function even worse tha
before cleaning.
Why are sometimes, somethings dicult to erase?
A. Invisible adhesive residue from the board protective lm may hav
remained. These can be removed with cleaning uid. Then wash clea
with warm water and wipe dry. See point 3 above.
B.
W rong kind of pens may have been used. There are several markers i
the market which can cause these problems. One should refrai
themselves from using such pens.
C . M ight be because the eraser used was dirty.
D .Soap may have been used during cleaning.
E .Someone might have blurred with his hands
, which led to a lm o 
grease forming up on the writing surface.

[email protected] www.sensesakustik.com