SENSORMETRIX Temp USB User manual

USB Data Logger
Operation Manual
Rev 1.5

Sensormetrix is a division of Sequoia Technology Group Ltd
Registered in England No. 4004881
VAT Registration No. GB614 5653 45
Sensormetrix
Basingstoke Road
Spencers Wood
Reading
Berkshire RG7 1PW
[phone]
[phone]
[e-mail]
www.sensormetrix.co.uk
sales
fax
email
web
2
USB Data Logger
Operation Manual
Rev 1.5
Contents
Page
Introduction 3
Features 3
USB Temperature Data Logger 4
USB Temperature Humidity Data Logger 5
LCD Symbols Display Instructions 6
Button Instructions 6
Battery Installation 7
Fixing USB Data Logger 7
Quick Start 8
Connect the Logger to PC 8
Setting Up the Logger to Record Data 9
Download Data from the Logger 12
Delete All Logs from the Logger 13
Data Listing Window 13
Exporting Logger Data 14
File List 14

Sensormetrix is a division of Sequoia Technology Group Ltd
Registered in England No. 4004881
VAT Registration No. GB614 5653 45
Sensormetrix
Basingstoke Road
Spencers Wood
Reading
Berkshire RG7 1PW
[phone]
[phone]
[e-mail]
www.sensormetrix.co.uk
sales
fax
email
web
3
USB Data Logger
Operation Manual
Rev 1.5
Introduction
Temp USB and HTemp USB are low cost, battery operated, easy to install Tempera-
ture/Temperature and Humidity loggers with USB interface, specially designed for
monitoring warehouses, galleries, greenhouses, refrigerator, cold-chain and con-
tainer transport applications. Once employed the logger will record temperature/
humidity and store the recordings in its internal memory. This history of measure-
ments can then be downloaded into a PC in the form of spreadsheet or graphical
representation for further analysis or for record keeping. The loggers are often used
by shipping companies to show the temperature of the container/goods shipped
during transportation.
The LCD display at the front can give current value, as well as Maximum and Mini-
mum readings and upper and lower limits. The loggers can also indicate maximum
set value by a blinking LED and Battery low alert.
Features
• Easy to use USB logger.
• Logged data can be transferred to PC and saved as spreadsheet or graphical
representation.
• Temperature and humidity upper/lower limit can be set. When this upper/low
limit is reached, the LED will turn on.
• Ultra-low consumption design, 1/2AA 3.6V Li battery, lasts for 12 months.
• Highly sensitive sensor gives fast response and high accuracy.
• Waterproof and dustproof standard IP67, resisting moisture, dew-point
temperature and dust.

Sensormetrix is a division of Sequoia Technology Group Ltd
Registered in England No. 4004881
VAT Registration No. GB614 5653 45
Sensormetrix
Basingstoke Road
Spencers Wood
Reading
Berkshire RG7 1PW
[phone]
[phone]
[e-mail]
www.sensormetrix.co.uk
sales
fax
email
web
4
USB Data Logger
Operation Manual
Rev 1.5
USB Temperature Data Logger
Number Description
1LCD display
2Button
3LED warming light when the temperature value
exceeds the setting limits
4USB connection port
5Waterproof ring
6Battery replacement position
7Waterproof transparent cover
8Fixed bracket
9Product model

Sensormetrix is a division of Sequoia Technology Group Ltd
Registered in England No. 4004881
VAT Registration No. GB614 5653 45
Sensormetrix
Basingstoke Road
Spencers Wood
Reading
Berkshire RG7 1PW
[phone]
[phone]
[e-mail]
www.sensormetrix.co.uk
sales
fax
email
web
5
USB Data Logger
Operation Manual
Rev 1.5
USB Temperature Humidity Data Logger
Number Description
1LCD display
2Button
3LED warming light when the temperature and
humidity values exceed the setting limits
4USB connection port
5Waterproof ring
6Battery replacement position
7Waterproof transparent cover
8Fixed bracket
9Product model

Sensormetrix is a division of Sequoia Technology Group Ltd
Registered in England No. 4004881
VAT Registration No. GB614 5653 45
Sensormetrix
Basingstoke Road
Spencers Wood
Reading
Berkshire RG7 1PW
[phone]
[phone]
[e-mail]
www.sensormetrix.co.uk
sales
fax
email
web
6
USB Data Logger
Operation Manual
Rev 1.5
Number Description
1HI symbol display shows the temperature and humidity upper limits setting status.
2LO symbol display shows the temperature and humidity lower limits setting status.
3MAX symbol display shows the maximum
temperature and humidity values recorded.
4MIN symbol display shows being the minimum temperature and humidity values
recorded.
5Battery power indication.
6Unit symbol display:
- temperature value (celcius/farenheit)
- humidity value
7Values symbol display
Operation Manual of USB Data Logger
--------P.3-----
Version:1.30
1.3 HTemp USB
1 3 4 7
52
9 6 8
①LCD display.
②Button.
③LED warming light when the temperature and humidity values exceed the setting limits.
④USB connection port.
⑤Waterproof ring.
⑥Battery replacement position.
⑦Waterproof transparent cover.
⑧Fixed bracket.
⑨Product model.
1.4 LCD symbols display instructions
1
26
3
47
5
①HI symbol display shows the temperature and humidity upper limits setting status.
②LO symbol display shows the temperature and humidity lower limits setting status.
③MAX symbol display shows the maximum temperature and humidity values recorded.
④MIN symbol display shows being the minimum temperature and humidity values recorded.
⑤Battery power indication.
⑥Unit symbol display:
temperature value（Celsius and Fahrenheit）humidity value
⑦Values symbol display.
LCD Symbols Display Insructions
Button Insructions
: Press this button for 5 seconds to turn on/off the logged
: Press this button again to check the MAX, MIN, High and Low warning limits values
as well as the current value

Sensormetrix is a division of Sequoia Technology Group Ltd
Registered in England No. 4004881
VAT Registration No. GB614 5653 45
Sensormetrix
Basingstoke Road
Spencers Wood
Reading
Berkshire RG7 1PW
[phone]
[phone]
[e-mail]
www.sensormetrix.co.uk
sales
fax
email
web
7
USB Data Logger
Operation Manual
Rev 1.5
Battery Installation
Press ① to open the battery back cover ②, then install your battery ③.
Fixing USB Data Logger
Use screw ②toxthebracket ① onto the wall and then install the data logger as
follows:

Sensormetrix is a division of Sequoia Technology Group Ltd
Registered in England No. 4004881
VAT Registration No. GB614 5653 45
Sensormetrix
Basingstoke Road
Spencers Wood
Reading
Berkshire RG7 1PW
[phone]
[phone]
[e-mail]
www.sensormetrix.co.uk
sales
fax
email
web
8
USB Data Logger
Operation Manual
Rev 1.5
Quick Start
Follow the below procedure to start using your data logger:
1. Connect the data logger to a free USB port on the computer.
2. Start ToAnalyzer U (in enclosed CD) software on PC.
3. From the toolbar select ‘Connect’.
4. Then you can setup or download data/delete data from the logger.
5. Unplug the logged, and then the logger is in stop mode.
6. Press ‘OK’ for about 5 seconds, the logger will power on (LOG mode) or off (OFF
mode).
Note: The logger has three modes:
• LOG: In this mode, the logger samples and records data timely.
• OFF: In this mode, the logger stops to sample and record, and the LCD display is
off.
Connecting the Logger to PC
To connect the logger to you PC, follow the following steps:
1. Connect the USB of your logger to a free USB port on your pc .
Please note: IfyouareconnectingtheloggertothePCforthersttime,thelogger
will automatically be recognized and installed by the PC.
2. Start ToAnalyzer analysis software.
3. Clikc the ‘Connect’ icon from the toolbar, then ToAnalyzer connects to the logger.
If more than one logger is connected to your computer at the same time, the program
will ask you to choose COM port manually.
Note: The windows operating system can not handle USB devices being unplugged
and plugged back very quickly. When unplugging the logger, wait for about 5 seconds
before plugging it back in again. If you unplug and plug back a device too quickly, the
computer may stop recognizing any USB devices on that port. If this happens you will
have to restart the computer. This is a windows USB problem and is not related to
ToAnalyzer software.

Sensormetrix is a division of Sequoia Technology Group Ltd
Registered in England No. 4004881
VAT Registration No. GB614 5653 45
Sensormetrix
Basingstoke Road
Spencers Wood
Reading
Berkshire RG7 1PW
[phone]
[phone]
[e-mail]
www.sensormetrix.co.uk
sales
fax
email
web
9
USB Data Logger
Operation Manual
Rev 1.5
Setting Up the Logger to Record Data
To set the logger to start recording data, click the ‘Setup’ button on the toolbar, or
select ‘Setup’ from the menu.
The setup options window is shown below:
Operation Manual of USB Data Logger
--------P.6-----
Version:1.30
4.Setting Up the Logger to Record Data
To set the logger to start recording data, click the button on the toolbar, or select Setup from the
menu.
The setup options window is shown below.

Sensormetrix is a division of Sequoia Technology Group Ltd
Registered in England No. 4004881
VAT Registration No. GB614 5653 45
Sensormetrix
Basingstoke Road
Spencers Wood
Reading
Berkshire RG7 1PW
[phone]
[phone]
[e-mail]
www.sensormetrix.co.uk
sales
fax
email
web
10
USB Data Logger
Operation Manual
Rev 1.5
Get current setup information from the logger. Click this button (to the left), and
then the old setup information is shown below.
Operation Manual of USB Data Logger
--------P.7-----
Version:1.30
Get current setup information from the logger. Click this button, and then the old setup
information is shown below.
In the example below, the settings are as follows:
:Synchronize the new setup information and current PC time to the logger. After changing the
configuration, do not forget clicking this button to make sure that the new configuration is wrote to
the logger.
:Synchronize the PC time to the logger.
Name: Gives a name to the logger.
Type: The device type.
Model: The device model.
Serial No: Every logger has a SN with 10 characters.The length must be 10.
LOG Intervals(s): The interval of recording.
Log Count: The count of the logs that the logger has recorded.
Memory capacity: The total capacity of the logger memory. One reading includes time and three
channels’ data.
Temperature Unit: The selection of C and F.
Start Mode: There are three start modes: No Delay / Delay / Timer.
In the example below, the settings are as follows:
Operation Manual of USB Data Logger
--------P.7-----
Version:1.30
Get current setup information from the logger. Click this button, and then the old setup
information is shown below.
In the example below, the settings are as follows:
:Synchronize the new setup information and current PC time to the logger. After changing the
configuration, do not forget clicking this button to make sure that the new configuration is wrote to
the logger.
:Synchronize the PC time to the logger.
Name: Gives a name to the logger.
Type: The device type.
Model: The device model.
Serial No: Every logger has a SN with 10 characters.The length must be 10.
LOG Intervals(s): The interval of recording.
Log Count: The count of the logs that the logger has recorded.
Memory capacity: The total capacity of the logger memory. One reading includes time and three
channels’ data.
Temperature Unit: The selection of C and F.
Start Mode: There are three start modes: No Delay / Delay / Timer.
Operation Manual of USB Data Logger
--------P.7-----
Version:1.30
Get current setup information from the logger. Click this button, and then the old setup
information is shown below.
In the example below, the settings are as follows:
:Synchronize the new setup information and current PC time to the logger. After changing the
configuration, do not forget clicking this button to make sure that the new configuration is wrote to
the logger.
:Synchronize the PC time to the logger.
Name: Gives a name to the logger.
Type: The device type.
Model: The device model.
Serial No: Every logger has a SN with 10 characters.The length must be 10.
LOG Intervals(s): The interval of recording.
Log Count: The count of the logs that the logger has recorded.
Memory capacity: The total capacity of the logger memory. One reading includes time and three
channels’ data.
Temperature Unit: The selection of C and F.
Start Mode: There are three start modes: No Delay / Delay / Timer.
Synchronize the new setup information and current PC time to the logger. After
changingtheconguration,do not forget to click this button (to the left) to make
surethatthenewcongurationiswrotetothelogger.