Sentidrive Sentinelle Mini User manual

User Guide
V1.0

Welcome to the Sentidrive community !
Register your Sentinelle Mini
To enable the Sentidrive service:
Bring the S/N number on the back of the Guide User and KEY
ID.
Register your equipment on your app or online space
www.sentidrive.com.
Choose the subscription plan corresponding to your needs.
Application available on IOS (Apple Store) or Android (Google Play):
In order to benet from the Sentidrive service, it is necessary to subscribe to a
subscription, more information on our website www.sentidrive.com.
1. STARTING THE EQUIPMENT
Remove the cover, turn on the battery by putting the switch in the
ON position. Internal power starts and equipment lights up. Now
connect the equipment with the power supply external (see
chapters 3 and 4).
Operating statutes
Getting started
internal battery

2. OPERATING STATUTES
In order to view the status of your Sentinel Mini, disable the
«discreet mode» of your equipment using your application. When
the «discrete mode» is activated, the LEDs are lit only in the event
of a malfunction.
Power
Charging (0,1s ON/3s OFF)
Full battery (1s ON/3s OFF)
Low battery (fast ashing)
System off
Available network (1s ON/3s OFF)
Connected to server (0.1s ON/3s OFF)
Signal search (fast ashing)
No signal available
GPS
GPS connected
GPS signal search (ashing)
GPS disconnected/off
2G/4G
3. INSTALLATION
Follow the installation orientation.
Adhesive tape
The adhesive can be placed on the top or bottom of the
equipment.
Top side (with logo)

Recommended installation of double-sided adhesive tape:
- Prepare the surface with a degreaser and make sure that there is
no dust and other dirt that can interfere with the hook.
- Place the adhesive tape on your Sentinel Mini.
- Glue the equipment to your vehicle by exerting moderate
pressure for 10 seconds.
Make sure that the positioning of your Sentinelle Mini does not
interfere in any way with the proper functioning of the vehicle. Make
sure that the positioning of the cables does not pass over parts
protruding from the vehicle, either away from warm places (block
engine, exhaust...) and that the cables be xed by clamps.
4. ELECTRICAL CONNECTION
The realization of the electrical connection by a professional is ad-
vised.
Battery
(12V/24V)
+
-
B+
GND
OFF START
Ignition lock
ACC ON
Option
ACC
Accessories
Fuse 2A
The standby operation of your Sentinel Mini requires a permanent
power supply. In order to avoid disconnections untimely, we advise
if possible a connection of the wires by welds.
5. CARE GUIDE / WARRANTY
BATTERY
The Sentinel Mini has an internal battery. It is strictly forbidden to approach a
ame, or risk explosion. Beware, there is a risk of explosion if the battery is
replaced by an incorrect type battery. Always place your used electronics and bat-
teries, as well as their packaging, at the appropriate collection points.

TEMPERATURE
In normal use, the unit may heat up. In the event of an abnormal temperature,
the case will be turned off to protect its components. Avoid leaving your case in
full sun. Sentinelle Mini remains operational in the following temperature range:
-20C/70C.
Prolonged exposure to higher or lower temperatures can damage the product.
TRANSMISSION 4G
The Sentinelle Mini incorporates a 4G GSM transmission system. The same
recommendations for use as for a mobile phone should be followed.
WARRANTY
The explanations and specications contained in this user guide are provided only
as information and can be changed without prior notication. SAS
SENTIDRIVE cannot be held directly or indirectly responsible for any accidental
data damage or loss resulting from an error or omission in this document.
Sentinel is guaranteed against any defects of parts or manufacture for 24 months
from the date of purchase, if the purchase was made directly with the company
SAS SENTIDRIVE or a licensed dealer. The opening of the product by a technician
not authorized by SAS SENTIDRIVE cancels the warranty.
RECYCLING
The logo opposite indicates that neither the product nor its used electronic
accessories can be disposed of in other household waste. Please use the
return and collection systems available in your country for the proper and
safe disposal of this product.
Network
Frequency
Internal battery
Operating voltage
Operating temperature
Device dimension
4G & 2G
FDD : B1/B3/B5/B7/B8/B20
TDD : B34/B38/B39/B40/B41
GSM : 900/1800 MHz
88mm*45mm*15.2mm
9-90VDC
-20°C to +70°C
60mAh,3,7V Li-Polymer battery
Dust and water resistance IP 65
SPECIFICATIONS

www.sentidrive.com
SAS SENTIDRIVE