SERAX Studio Simple B7218401 User manual

WWW.SERAX.COM
Safety directions / Instruction manual
Studio Simple Table lamp
B7218401
1600 mm
500 mm
1800 mm
Max
25W
1xE27
220-240V
50-60HZ
Veldkant 21, 2550 Kontich, Belgium - Tel. [phone]

Safety directions
Please study the instruction manual and below information carefully before installing or using this product.
Please keep this user manual for further reference.
1. Take account of the minimal separation distance from other objects and the room required around the fitting.
2. If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service
agent or a similar qualified person in order to avoid a hazard.
3. Meaning of symbols:
WWW.SERAX.COM
Veldkant 21, 2550 Kontich, Belgium - Tel. [phone]
Protection class 1: the fitting must be earthed
Protection class 2: the fitting is double insulated and does not require earthing
Protection class 3: the fitting is low voltage
Observe the indicated minimum distance between the lamp and the illuminated materials/objects
Only the self-screening halogen illuminants should be used with the luminaire
Strip the wire to the indicated length
Connect using the specified cable
The maximum wattage indicated in each lighting unit, for example, must not be exceeded
This luminaire was designed to work only with the indicated voltage
This luminaire cannot be disposed together with normal domestic waste in standard rubbish bin, but
you have to bring it to a staging area for electrical waste
The armature can be used in combination with a dimmer. Consult the sales outlet for the correct
type of dimmer (important in the case of 12V fittings)
For indoor use only, where direct contact with water is impossible
0,5m
Max
25W
1xE27
220-240V
50-60HZ