SereneLife PSLWEWCKR22 User manual

PSLWEWCKR22
CordedGrassTrimmerEdger
Handheld Electric Home Garden Grass Cutter

www.SerenLifeHome.com
WARNING: READ INSTRUCTIONS BEFORE USING THE PRODUCT
Let's get started...
These instructions are for your safety.
Please read through them thoroughly before use and retain them for
future reference.
Getting Started ................................................................................................................ 01
Safety Information .......................................................................................................... 02
Your Product ..................................................................................................................... 07
Before you start ................................................................................................................. 09
In more detail .................................................................................................................. 10
Product Functions ............................................................................................................ 12
Operation ............................................................................................................................ 14
Care and Maintenance .................................................................................................. 15
Troubleshooting .............................................................................................................. 19
Recycling and Disposal ................................................................................................. 19
Specs & Features ............................................................................................................. 24
1

www.SerenLifeHome.com
Safety Information
Safety Warnings:
If an extension cord is used, it cannot be lighter than H05VV-F, wire
diameter cannot be less than 2 x 0.75 Mm², and the length of extension is
not more than 75m.
IMPORTANT
Read carefully before use.
Keep for future reference.
Don’t connect a damaged cord to the supply or touch a damaged cord
before it is disconnected from the supply for the reason that damaged
cords can lead to contact with live parts
Training
1. Read the instructions carefully. Be familiar with the controls and correct
use of the machine.
2. Never allow children, persons with reduced physical, sensory, or mental
capabilities or lack of experience and knowledge or people unfamiliar
with these instructions to use the machine, local regulations may restrict
the age of the operator.
3. Keep in mind that the operator or user is responsible for accidents or
hazards occuring to the people or their property.
Preparation
1. Make sure all electric cords are in good condition before using them.
Check for any damaged or exposed wires, fraying or cracked leads, and
cracked or broken power sockets or plugs. If the cord has been damaged
during use, disconnect the cord immediately from the power supply.
DO NOT TOUCH THE CORD BEFORE DISCONNECTING THE SUPPLY.
Do not use if the cord is damaged or worn.
2
WARNING! Safety rules must be followed when
using the product. For your own safety and that of
bystanders, please read these instructions before
operating the product. Please keep the instructions
safe for later use.

www.SerenLifeHome.com
2. Before use, always visually inspect the machine for damaged, missing or
misplaced guards or shields.
3. Never operate the machine while people, especially children, or pets are
nearby.
Operation
1. Keep supply and extension cords away from cutting means.
2. Wear eye protection and stout shoes and long trousers at all times while
operating the machine.
3. Avoid using the machine in bad weather conditions especially when
there is a risk of lightning.
4. Use the machine only in daylight or good articial light.
5. Never operate the machine with damaged guards or shields or without
guards or shields in place.
6. Switch on the motor only when the hands and feet are away from the
cutting means.
7. Always disconnect the machine from the power supply (i.e. remove the
plug from the mains, remove the disabling device or removable battery)
• whenever the machine is left unattended;
• before clearing a blockage;
• before checking, cleaning or working on the machine;
• after striking a foreign object;
• whenever the machine starts vibrating abnormally.
8. Take care against injury to feet and hands from the cutting means.
9. Always ensure that the ventilation openings are kept clear of debris.
10. Never to replace the non-metallic cutting means with metallic cutting
means.
11. Do not overreach and to keep the balance at all times, to always be sure
of the footing on slopes and to walk, never run.
12. Do not to touch moving hazardous parts before the machine is
disconnected from the mains and the moving hazardous parts have
come to a complete stop.
Maintenance and Storage
1. Disconnect the machine from the power supply (i.e. remove the plug
from the mains, remove the disabling device or removable battery)
before carrying out maintenance or cleaning work.
3

www.SerenLifeHome.com
2. Use only the manufacturer's recommended replacement parts and
accessories.
3. Inspect and maintain the machine regularly. Have the machine repaired
only by an authorized repairer.
4. When not in use, store the machine out of the reach of children.
Recommendation
The machine should be supplied via a residual current device (RCD) with a
tripping current of not more than 30 mA.
Vibration and Noise Reduction
To reduce the impact of noise and vibration emission, limit the time of
operation, use low-vibration and low noise operating modes as well as
wear personal protective equipment.
Take the following points into account to minimise the vibration and
noise exposure risks:
1. Only use the product as intended by its design and these instructions.
2. Ensure that the product is in good condition and well maintained.
3. Use correct attachments for the product and ensure they are in good
condition.
4. Keep tight grip on the handles/grip surface.
5. Maintain this product in accordance with these instructions and keep it
well lubricated (where appropriate).
6. Plan your work schedule to spread any high vibration tool use across a
longer period of time.
Emergency
Familiarise yourself with the use of this product by means of this
instruction manual. Memorise the safety directions and follow them to
the letter. This will help to prevent risks and hazards.
1. Always be alert when using this product, so that you can recognise and
handle risks early. Fast intervention can prevent serious injury and
damage to property.
2. Switch o and disconnect from the power supply if there are
malfunctions. Have the product checked by a qualied professional and
repaired, if necessary, before you operate it again.
4

www.SerenLifeHome.com
Residual Risks
Even if you are operating this product in accordance with all the safety
requirements, potential risks of injury and damage remain. The following
dangers can arise in connection with the structure and design of this
product:
1. Health defects resulting from vibration emission if the product is being
used over long periods of time or not adequately managed and properly
maintained.
2. Injuries and damage to property due to broken cutting attachments or
the sudden impact of hidden objects.
Symbols
On the others the following symbols and abbreviations. Familiarise yourself
with them to reduce hazards like personal injuries and damage to property.
5

www.SerenLifeHome.com
6
Objects thrown by the product could hit the user or other
bystanders. Always ensure that other people and pets remain at a
safe distance from the product when it is in operation. In general,
children must not come near the area where the product is.
Inspect the area where the product is to be used and remove all
objects which can be thrown by the product. If objects are hidden
while operating stop the motor and remove the object.
Keep other people out of working area during operation. A distance
of at least 15m must be observed.
Disconnect from the mains plug if the cord is damaged or
entangled. DO NOT TOUCH THE CORD BEFORE DISCONNECTING
THE SUPPLY.
Contact of the guide bar tip with any object should be avoided.
Guaranteed sound power level value in dB
This product is of protection class II. That means it is equipped with
enhanced or double insulation.
The product complies with the applicable European directives and
an evaluation method of conformity for these directives was done.
WEEE symbol. Waste electrical products should not be disposed of
with household waste. Please recycle where facilities exist. Check
with your LocalAuthority or local store for recycling advice

www.SerenLifeHome.com
Your product
7

www.SerenLifeHome.com
1. Rear handle 9. Cover
2. On/o switch 10. Trimmer line
3. Front handle 11. Spring
4. Upper shaft 12. Nut
5. Lower shaft 13. Spacer
6. Air vents 14. Shaft
7. Guard 15. Fixing screw
8. Trimmer head
Sound Values
> Sound pressure level at operator's position L :
> Uncertainty K :
> Measured sound power level L :
> Uncertainty K :
> Guaranteed sound power level L
(according to 2000/14/EC amended by 2005/88/EC):
> Hand arm vibration values:
> Uncertainty K :
The sound values have been determined according to noise test code
given in EN 50636-2-91, using the basic standards EN ISO 3744 and EN ISO
11094. The sound intensity level for the operator may exceed 80 dB(A) and
ear protection measures are necessary.
The declared vibration value has been measured in accordance with a
standard test method (according to EN 50636-2-91) and may be used for
comparing one product with another. The declared vibration value may
also be used in a preliminary assessment of exposure.
8
pA
pA
WA
WA
WA
h,W
80 dB(A)
3.0 dB(A)
87.2 dB(A)
2.01 dB(A)
90 dB(A)
4.421 m/s
1.5 m/s
2
2
WARNING! Depending on the actual use of the product the vibration
values can dier from the declared total. Adopt proper measures to
protect yourself against vibration exposures. Take the whole work process
including times the product is running under no load or switched o into
consideration.
Proper measures include among others regular maintenance and care of
the product and accessories, keeping hands warm, periodical breaks and
proper planning of work processes.

www.SerenLifeHome.com
Unpacking
1. Unpack all parts and lay them on a at, stable surface.
2. Remove all packing materials and shipping devices, if applicable.
3. Make sure the delivery contents are complete and free of any damage.
Using an incomplete or damaged product represents hazard to people
and property.
4. Ensure that you have all the accessories and tools needed for assembly
and operation. This also includes suitable personalprotective equipment.
Before you Start
You will need
(items not supplied) (items supplied)
> Suitable personal protective equipment
> Suitable extension cord for outdoor use
> Suitable crosshead screwdriver
Assembly
9
WARNING! The product and the packaging are not children’s toys!
Children must not play with plastic bags, sheets and small parts!
There is a danger of choking and suocation.
NOTE: The needed accessories depends on the intended application.
Ask your dealer for advice.
WARNING! The product must be fully assembled before operation!
Do not use aproduct that is only partly assembled or assembled with
damaged parts!
Follow the assembly instructions step by step and use the pictures
provided as a visual guide to easily assemble the product. Do not connect
the product to power supply before it is completely assembled.
NOTE: Take care of small parts that are removed dusring assembly or
when making adjustments. Keep them secure to avoid loss.

www.SerenLifeHome.com
Shaft Assembly
1. Align the shaft ends with each other and assemble the lower shaft (5)
into the upper shaft (4).
2. Secure the connection with the bolt.
Guard
1. Align and place the guard (7) onto the trimmer head (8).
2. Secure the connection with the screw (15).
In more detail...
Product functions 15
Operation 17
Care and maintenance 19
Troubleshooting 23
Recycling and disposal 24
Guarantee 24
EC declaration of conformity 25
10
WARNING! Never use the product without the guard properly t.

www.SerenLifeHome.com
Intended Use
This electric grass trimmer PSLWEWCKR22 is designated with a rated
power input of 250 Watts.
1. The product is intended for cutting weed, grass or similar soft vegetation
in areas that are hard to reach, e. g. under bushes, on slopes and edges.
It may not be used to work on unusual thick or wet grass, e.g. pasture
grass, or to shred leaves.
2. For safety reasons it is essential to read the entire instruction manual
before rst operation and to observe all the instructions therein.
3. This product is intended for private domestic use only, not for any
commercial trade use. It must not be used for any purposes other than
those described.
Guard
The guard protects the operator against thrown objects during operation.
Switching ON/OFF
1. Squeeze the ON/OFF switch (2) to switch
the product ON.
2. Release the on/o switch (2) to witch
the product o.
11
NOTE: Always remove knife protection before use.

www.SerenLifeHome.com
Product Functions
General Operation
1. Check the product, its power cord and plug as well as accessories for
damage before each use. Do not use the product if it is damaged or
shows wear.
2. Double check that the accessories and attachments are properly xed.
3. Always hold the product by its handles. Keep the handles dry to ensure
safe support.
4. Ensure that the air vents are always unobstructed and clear. Clean them if
necessary with a soft brush. Blocked air vents may lead to overheating
and damage the product.
5. Switch the product o immediately if you are disturbed while working by
other people entering the working area. Always let the product come to
complete stop before putting it down.
6. Do not overwork yourself. Take regular breaks to ensure you can
concentrate on the work and have full control over the product.
WARNING! Ensure the extension cord will not touch the trimmer head
and the trimming line during operating! Danger of electric shock!
Line Feeding
During use, the tip of the trimming line will get shorter due to wear.
Regularly check the condition of the trimming line and adjust if necessary.
The trimming spool is equipped with a bumper helping to feed the
trimming line while operating.
NOTE: The line feeding system works only when the product is switched ON.
1. Tap the bumper on solid ground and
the spool will release trimming line.
2. Excess line will be cut by the knife and
should always remain inside the radius
of the guard
12
WARNING! The product will continue to rotate for some time
even after the motor has been switched o! Wait until it comes
to a complete stop before you put the product down!

www.SerenLifeHome.com
Intended Use
This electric grass trimmer PSLWEWCKR22 is designated with a rated
power input of 250 Watts.
1. The product is intended for cutting weed, grass or similar soft vegetation
in areas that are hard to reach, e. g. under bushes, on slopes and edges.
It may not be used to work on unusual thick or wet grass, e.g. pasture
grass, or to shred leaves.
2. For safety reasons it is essential to read the entire instruction manual
before rst operation and to observe all the instructions therein.
3. This product is intended for private domestic use only, not for any
commercial trade use. It must not be used for any purposes other than
those described.
Trimming
1. Hold the product rmly with a gap between the product and your right
side.
2. Stand upright, do not lean forward and pay attention to posture.
Keep both feet apart to help retain your balance.
3. Hold the cutting head just above the ground at an angle of
approximately 30°.
4. Move the product with a slow regular arc from left to right before moving
it back to the starting position before trimming the next area
13
WARNING! The trimming line will be thrown out!
Danger of injury especially for bystanders!
NOTE: The trimming line will wear faster and require more feeding
if cutting is done along sidewalks or other abrasive surfaces or
heavier weeds are being cut.

www.SerenLifeHome.com
5. Ensure the cutting attachment remains clean and free from o-cuts that
may cause it to jam. Check regularly. Release the ON/OFF switch (2) and
disconnect the product from the power supply before checking.
6. Trim longer grass in stages; do not cut long grass in one cut.
For the best results, cut longer grass in steps
Operation
Tips
1. For best results, do not cut wet grass
because it tends to stick to the cutting
head and guard, prevents proper discharge
of grass trimmings, and could cause you to
slip and fall.
2. Pay special attention when performing
the work close to trees and bushes.
The cutting head could damage sensitive
bark, and damage fence posts.
14
WARNING! The trimming line will be thrown out!
Danger of injury especially for bystanders!
NOTE: The trimming line will wear faster and require more feeding
if cutting is done along sidewalks or other abrasive surfaces or
heavier weeds are being cut.

www.SerenLifeHome.com
After Use
1. Switch the product o, disconnect it from the power supply and let it
cool down.
2. Check, clean and store the product as described below.
Care and Maintenance
The golden rules for care
1. Keep the product clean. Remove debris from it after each use and before
storage.
2. Regular and proper cleaning will help ensure safe use and prolong the
life of the product.
3. Inspect the product before each use for worn and damaged parts.
Do not operate it if you nd broken and worn parts.
General Cleaning
1. Clean the product with a dry cloth. Use a brush for areas that are hard to
reach.
2. In particular clean the air vents after every use with a cloth and brush.
3. Remove stubborn dirt with high pressure air.
4. Check for worn or damaged parts. Replace worn parts as necessary or
contact an authorised service centre for repair before using the product
again.
Guard
1. Keep the guard clean and free of debris. Remove trimmings.
2. Replace the guard with one of the same type when it is worn or shows
damage.
15
WARNING! Always switch the product o, disconnect the product
from the power supply and let the product cool down before
performing inspection,maintenance and cleaning work!
WARNING! Only perform repairs and maintenance work according to
these instructions! All further works must be performed by a qualied
specialist!
NOTE: Do not use chemical, alkaline, abrasive or other aggressive
detergents or disinfectants to clean this product as they might be
harmful to its surfaces.

www.SerenLifeHome.com
Care and Maintenance
Trimmer Spool
1. Replace the trimming spool when it is empty or worn.
2. Turn the product over to access the trimming line.
3. Hold the trimmer head steady with one hand. Press the latches on both
side of spool cover by another hand then rotate the cover anti-clockwise
to disengage the latches from the housing
4. Remove the cover together with the trimming spool
5. Discard all trimming line on the spool
6. Clean the housing before inserting a new spool of the same type.
7. Lead the trimming line endings through the eyelets of the cover.
8. Ret the cover onto the housing and rotate it clockwise to secure it.
Make sure the latches snap into its position to secure the cover.
9. Ensure the cover is correctly tted before releasing it. Otherwise, due to
spring action it may be ejected injuries.
16

www.SerenLifeHome.com
Maintenance
Before and after each use, check the product and accessories or attachments
for wear and damage. If required, exchange them for new ones as described
in this instruction manual. Observe the technical requirements.
Power Cord
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualied persons in order to avoid a hazard.
UK Plug
If you need to replace the fitted plug, then follow the instructions below.
IMPORTANT: The wires in the mains lead are coloured in accordance with
the following code:
Blue — Neutral Brown — Live
As the colors of the wire in the mains lead of this product may not
correspond with the colored marking identifying the terminals in your plug,
proceed as follows. The wire, which is colored blue, must be connected to
the terminal, which is marked with Nor colored black. The wire, which is
colored brown, must be connected to the terminal,which is marked L or
colored red.
Only fit an approved BS 1363 or BS 1363/A plug and correctly rated BS 1363
Amp fuse. If in doubt, consult a qualified electrician.
17
WARNING! Never connect live or neutral wires to the earth
terminal of the plug.

www.SerenLifeHome.com
Spare Parts/Replacement parts
The following parts of this product may be replaced by the consumer.
Spare parts are available at an authorised dealer or through our customer
service.
Repair
This product does not contain any parts that can be repaired by the
consumer. Contact an authorised service centre or a similarly qualied
person to have it checked and repaired.
Storage
1. Switch the product o and disconnect it from the power supply.
2. Clean the product as described above.
3. Store the product and its accessories in a dark, dry, frost-free,
well-ventilated place.
4. Always store the product in a place that is inaccessible to children.
The ideal storage temperature is between 10 oc and 30 °C.
5. We recommend using the original package for storage or covering the
product with a suitable cloth or enclosure to protect it against dust.
Transportation
1. Switch the product o and disconnect it from the power supply.
2. Attach transportation guards, if applicable.
3. Always carry the product by its handles I shafts
4. Protect the product from any heavy impact or strong vibrations which
may occur during transportation in vehicles.
5. Secure the product to prevent it from slipping or falling over.
18
NOTE: If a moulded plug is tted and has to be removed take great
care in disposing of the plug and severed cable, it must be destroyed
to prevent engaging into a socket.

www.SerenLifeHome.com
Troubleshooting
Suspected malfunctions are often due to causes that the users can x
themselves. Therefore check the product using this section. In most cases
the problem can be solved quickly.
Recycling and Disposal
The product comes in a package that protects it against damage
during shipping. Keep the package until you are sure that all parts
have been delivered and the product is working properly. Recycle
the package afterwards.
WEEE symbol. Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check with your Local
Authority or local store for recycling advice.
19
Problem Possible Cause Solution
1. Product does not
start
2. Product does not
reach full power
3. Unsatisfactory result
4. Excessive vibration
or noise
1.1. Not connected to
power supply
1.2. Power cord or plug
is defective
1.3. Other electrical
defect to the product
2.1. Extension cord not
suitable for operation
with this product
2.2. Power source
(e.g. generator) has
too low voltage
2.3. Air vents are blocked
3.1. Cutting attachment
is worn
4.1. Cutting attachment is
dull/ damaged
4.2. Bolts/nuts are loose
1.1. Connect to power
supply
1.2. Check by a specialist
electrician
1.3. Check by a specialist
electrician
2.4. Use a proper
extension cord
2.5. Connect to another
power source
2.6. Clean the air vents
3.1. Replace with a new
one
4.3. Have it replaced with
new one
4.4. Tighten bolts/nuts