Seriline Cidron Slimline Economy 13.56MHz User manual
Quick Installation Guide
Cidron Slimline E Reader
Ver. 02-2022
Installation Guide
Cidron Slimline E Reader
Contact info
Seriline AB
Gustavslundsvägen 50
167 51 Bromma | Sweden
+46 (0) 10-150 75 00
www.seriline.com
BZ
R-LED
G-LED
GND
D0
D1
RXD
TXD
GND
DC+
External Buzzer control
External Red LED control
External Green LED control
Ground
Wiegand Data1
Wiegand Data0
RS232 -
RS232 +
Power supply
Power supply 9 - 12 VDC
x
x
x
-
x
x
-
-
x
x
-
-
-
-
-
-
x
x
x
x
BZ
R-LED
G-LED
GND
D0
D1
RXD
TXD
GND
DC+
P3
Quick Installation Guide
Cidron Slimline E Reader
Wiegand / RS232
Quick Installation Guide
Cidron Slimline E Reader
OSDP / RS485 Converter
Note: For more information about
OSDP / RS485 converter se Cidron
Slimline E Installation Guide
PIN Description Wiegand RS232
Terminal description
P3
Please note that this is only a quick installation guide, information regarding
recommendations, measurements and accessories are available in the full version
of the Cidron installation guide. See QR-code on the last page. Also available on:
https://doc.Serilinegroup.com/display/PUB/Seriline+Cidron
Please consult table in full installation manual on how the LED-settings will affect
current draw.
Power consumption:
Model Current draw (idle) Current draw (peak)
12V 12V
Slimline Economy 13.56MHz 35 mA 92 mA
Notes
1. Maximum wiegand cable length is 150 meters and requires
a high quality shielded cable with minimum AWG18 dimension
(=0.8231mm2) in an environment free from electrical noise.
A cable with smaller dimension or an installation environment with
electrical disturbances will reduce the maximum cable length.
2. Wiegand requires dedicated wires for external control of Green LED,
Red LED, Buzzer and Keypad backlight.
BZ
R-LED
G-LED
GND
D0
D1
RXD
TXD
GND
DC+
External Buzzer control
External Red LED control
External Green LED control
Ground
Wiegand Data1
Wiegand Data0
RS232 -
RS232 +
Power supply
Power supply 9 - 12 VDC
x
x
x
-
x
x
-
-
x
x
-
-
-
-
-
-
x
x
x
x
BZ
R-LED
G-LED
GND
D0
D1
RXD
TXD
GND
DC+
P3
Quick Installation Guide
Cidron Slimline E Reader
13.56MHz Wiegand / RS232
Quick Installation Guide
Cidron Slimline E Reader
13.56MHz Wiegand / OSDP /
RS485 Converter
Note: For more information
about OSDP / RS485 converter
see Cidron Installation Guide
Slim E Reader
PIN Description Wiegand RS232
Terminal description
P3
Please note that this is only a quick installation guide, information regarding
recommendations, measurements and accessories are available in the full version
of the Cidron installation guide.
Please consult table in full installation manual on how the LED-settings will aect
current draw.
Power consumption:
Notes
1. Maximum wiegand cable length is 150 meters and requires
a high quality shielded cable with minimum AWG18 dimension
(=0.8231mm2) in an environment free from electrical noise.
A cable with smaller dimension or an installation environment with
electrical disturbances will reduce the maximum cable length.
2. Wiegand requires dedicated wires for external control of Green
LED, Red LED, Buzzer and Symbol backlight.
Model Current draw (idle) Current draw (peak)
Cidron E
12V 12V
35 mA 92 mA
A RS485 Send/Receive
GND GroundData+
B RS485 Send/Receive
DC+ Power supply 9-12
