Setcom LiberatorMAX Fire User manual

9/6/2023
LiberatorMAX Fire
Quick Reference Guide
1. How do I tell what type of headset I have? Reference the part number on the Setcom scker
found on the black metal band of the headset:
a. CSB-900MAX: Radio-Transmit Headset
b. CSB-902MAX; Radio-Transmit Headset with Vented Cup
c. CSB-901MAX: Intercom-Only Headset
d. CSB-905MAX: Intercom-Only Headset with Vented Cup
2. How do I know what channel my headset is on?
a. Turn on the headset using the power / volume knob on the right earcup. You will hear a
series of beeps to let you know how charged the headset is (1 beep = low charge, 3
beeps = full charge), then a voice tells you the channel your headset is on.
3. How do I know what channel the master staon is on?
a. The master staon channel is on the LED display on the front of the master staon.
4. How do I change the channel of the headset?
a. Press and hold the buons on both earcups simultaneously. You will hear the channels
begin to cycle through. Once you hear the channel you want to be on, simply let go of
the buons and you will be instantly connected.
5. How do I change the channel of the master staon?
a. Press the black buon near the LED display to get the the next channel. Connue this
process unl you get to the channel the master staon should be on.
6. Intercom-Only headset: Can hear intercom and radio audio but cannot talk via intercom to other
headsets:
a. Check to make sure the mic is not muted: Press the buon on the right earcup once. If
you hear a two-beep ascending tone, you opened up the mic and should be able to
intercom again. If you hear a two-beep descending tone, you muted the mic. You can
sll hear everything going on, but cannot talk.
7. Headset(s) can intercom but cannot hear or transmit over the radio:
a. Confirm your headset is on the same channel as the MS-900MAX master staon. See #2
above for checking the channel of your headset, then see #3 to confirm the master
staon is on the same channel.

9/6/2023
8. Other crew members or dispatch say my audio sounds low or accompanied with stac:
a. Confirm proper MIC placement.
b. Confirm you have a windscreen on the mic
c. Confirm antenna on the headset is secured
9. How many headsets can connect to one master staon?
a. You can have any combinaon of up to seven radio-transmit and intercom-only headsets
connected to one master staon at a me. If any headsets aempt to join the channel
beyond the inial seven headsets, they will join as a listen-only headset(s): they can
hear everything that is going on but will not be able to talk or transmit.
10. Operang instrucons video here.
For further assistance, reach out to our technical support team
at [e-mail] or 650-965-8020