Sevenoak SK-MS01 User manual
Warnings
Limited One-year Warranty
Thank you for choosing Sevenoak and congratulations on your
purchase of the Sevenoak SK-MS01 Mini Action Stabilizer Handheld
Video Stabilizer.
Sevenoak SK-MS01 is a motorized Dolly Adapter cart which oers
your video with more dynamic movement but keeps your budget low.
It features dual motor operation, aluminum construction, 1/4" screw
holes, 0.65mm connecting hole, power switch, forward-backward
switch and speed control button.
SK-MS01 is powered by two 1.5V AA batteries and can support up to
3KG. It can be easily attached to any camera dollies with standard
0.65mm connecting holes and moves smoothly at dierent angle.
With 1/4" screw holes, LED light, Monitor or microphone can be added
via articulated arms. With the forward-backward switch and speed
control button, the movement and speed can be controlled easily.
Motorized Dolly Adapter
SK-MS01
2016 Sevenoak lnc.Visit us on the
web at www.sevenoak.biz
Sevenoak provides a limited warranty that this product is free
from defects in materials and workmanship to the original
purchaser under normal use for a period of one (1) year from the
original purchase date or thirty (30) days after replacement (the
“Warranty Period”), whichever occurs later. Our responsibility
with respect to this limited warranty shall be limited solely to
repair or replacement, at its option, of any product which fails
during normal consumer use.
To obtain warranty coverage during the Warranty period,
contact your place of purchase (”Seller”) to obtain a return
merchandise authorization (”RMA”) number, and return to Seller
the defective product along with proof of purchase and the RMA
number.
This warranty does not extend to damage or failure which
results from misuse, neglect, accident, alternation, abuse,
improper installation or maintenance. EXCEPT AS PROVIDED
HEREIN, SEVENOAK MAKES NEITHER ANY EXPRESS WARRAN-
TIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT
LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. This warranty provides
you with specific legal rights, and you may also have additional
rights which vary from state to state.
■ Please read and follow these instructions, and keep
this manual in a safe place.
■ Handle the unit with care.
■ Clean the unit with a soft, dry cloth.
■ Use only parts provided by the manufacturer.
■ Make sure everything is secure before proceeding.
■ Make sure the item is intact and that there are no
missing parts.
■ Do not exceed the maximum load capacity.
■ All photos are for illustrative purposes only.
Assemble the unit
1. Install two 1.5V AA batteries into the push cart.
2. Attach the push cart onto the Axle,and ensurethe 0.65mm
hole on push cart is right above the 0.65mm hole on the Axle.
3. Mount the scale board onto the push cart,andmake sure the
0.65mm hole is in the right place, then lock these parts with
the included screw.
6. Mount the accessories onto the Articulated arm if necessory.
7. Adjust the dolly to a proper angle and ensure the whole set
equiments are fastened.
4. Mount the camera onto the dolly and fasten it.
5. Attach the Articulated arm to the push cart for accessories.
8. It’s ready to use now,speed and direction can be changed by the
swithes on the push cart.
Features
Supports up to 3 KG
With 1/4" screw holes for accessories
With standard 0.65mm hole for connecting camera dollies
Dual motor operation
Powered by two 1.5V AA batteries
Power switch
Variable speed
Forward-backward switch
