1Function and area of use
In this document we show how to set IP address, Subnet Mask and Gateway for
G-Series network adapters GL-9089 and GN-9289.
2About this Startup document
This Startup document should not be considered as a complete manual. It is an aid to be
able to startup a normal application quickly and easily.
This Start Up document should not be considered as a complete manual. It is an aid to be
able to start up a normal application quickly and easily.
Use the following software and drivers in order to obtain a stable application:
In this document we have used following hardware and software
•Modbus TCP/Ethernet IP network adapter light GL-9089
•Modbus TCP/Ethernet IP network adapter GN-9289
•BootpServerVer1000_Beijer Link to BootP
•Windows 10 64 bit
For further information we refer to
•GL-9089 Manual Link
•GN-9289 Manual Link
For further information refer to
•Manual name/number
•Beijer Electronics knowledge database, HelpOnline
This document and other Startup documents can be obtained from our homepage.
documents.
Copyright © Beijer Electronics, 2023
This documentation (below referred to as ‘the material’) is the property of Beijer Electronics. The holder or user has a non-
exclusive right to use the material.
The holder is not allowed to distribute the material to anyone outside his/her organization except in cases where the material is
part of a system that is supplied by the holder to his/her customer.
The material may only be used with products or software supplied by Beijer Electronics.
Beijer Electronics assumes no responsibility for any defects in the material, or for any consequences that might arise from the use of
the material.
It is the responsibility of the holder to ensure that any systems, for whatever applications, which is based on or includes the
material (whether in its entirety or in parts), meets the expected properties or functional requirements.
Beijer Electronics has no obligation to supply the holder with updated versions.
