Step 4.
Hook BRACES (D) from the
top and middle shelves
through CLIPS (F) on lower
shelves.
Loop the WALL STRAPS (E)
around the back top shelf.
Use a pencil to mark the
installaon points for the
screws and anchors
through the holes in each
strap.
TIP! Use a stud nder to
determine if installing
directly to wood or into
drywall. Masonry anchors
are required for concrete
and brick.
Customer Service Informaon
Telephone: (800) 323-5565
Fax: (310) 533-3899
Hours: 8:30 AM – 4:30 PM (PST)
Email: Support@SevilleClassics.com
Homepage: www.SevilleClassics.com
082020
For Dry Wall: Drill a hole at the marked point and insert the ANCHOR (M).
Insert SHORT SCREWS (L) through the strap and into the anchors with a screwdriver.
Repeat on other side for second wall strap.
For Wood/Wall Stud: Drill a pilot hole at the marked points. Insert LONG SCREWS (K)
through the strap and into the pilot holes. Screw unl secure.
Repeat on other side for second wall strap.
Specicaons
Dimensions: 34" x 14" x 64.25" H, 1" Pole Diameter
Weight capacity Per shelf Overall
On leveling feet 600 lbs. (272.1 kg.) 3000 lbs. ( 1360.7 kg.)