Southern Enterprises HZ031300TX User manual

HZ031300TX
ALYSSA WINE STORAGE
Assembly Instructions
PO:13876
For assistance with assembly, contact.
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com
Top supports up to 25 lb.
Drawer supports up to 10 lb.

HZ031300TX
ALYSSA WINE STORAGE
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware.
Carefully study the diagrams below.
You may receive extra hardware with your unit.
1 1PC
Drawer Front
2 1PC
Drawer Right Panel
3 1PC
Drawer Left Panel
4 1PC
Drawer Bottom Panel
5 1PC
Drawer Back Panel
6 1PC
Handle
7 1PC
Right Wood Panel
8 1PC
Left Wood Panel
9 1PC
Back Panel
10 1PC
Stretcher
11 1PC
Top Panel
12 1PC
Shelf Panel
13 1PC
Left Metal
Glide
14 1PC
Right Metal
Glide
15 1PC
Rear Wine Bottle Panel
16 1PC
Front Wine Bottle Panel
17 1PC
Right Metal Panel
18 1PC
Left Metal Panel
19 2PCS
Metal Stretchers

A 12PCS
Screws 4x12mm
B 14
PCS
Wood Dowel 8x30mm
C 4PCS
Screws 4x32mm
D 10PCS
Bolts 4x25mm
E 10PCS
Cam Locks
F
10PCS
Cam Bolts
G 8
PCS
Screws 4x12mm
H 1PC
Screws 4x38mm
I 5
PCS
Bolts 4x9mm
J 1PC
Nut
K 4PCS
End Caps
L 4PCS
L Metal Chip
M 2PCS
Plastic Wall Anchor
N 2PCS
Screws 4x25mm
O
2PCS
Plastic Straps
Assembly Tool Required
No.2 Phillips Screwdriver
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Avoid rubbing or scratching the surface with
rough or abrasive objects.
For replacement parts or questions, please
call customer service at 1-800-633-5096.

HZ031300TX
ALYSSA WINE STORAGE
Assembly Instructions
Step 1:
Attach Drawer Right Panel (2) and
Drawer Left Panel (3) to Drawer Front (1)
using Wood Dowels (B) and Cam Bolts
(F) as shown.
Fix Drawer Right Panel (2) and
Drawer Left Panel (3) to Drawer Front (1)
with Cam Locks (E) as shown.
Step 2:
Slide Drawer Bottom Panel (4) along the
grooves of Drawer Right Panel (2) and
Drawer Left Panel (3).
Then, attach Drawer Back Panel (5) to
Drawer Right Panel (2) and Drawer Left
Panel (3) as shown.
Step 3:
Fix Drawer Back Panel (5) to Drawer
Right Panel (2) and Drawer Left Panel (3)
using Screws (C).
Attach Handle (6) to Drawer Front (1)
using Bolts (D) as shown.
D

Step 4:
Attach Wood Dowels (B) and Cam Bolts
(F) to Right Wood Panel (7) and Left
Wood Panel (8) as shown.
Step 5:
Please pull out Left Metal Glide (13) and
Right Metal Glide (14).
Aim at the hole with arrow tip label on
Metal Glides (13), (14) and the
pre-drilled holes on Right Wood Panel (7)
and Left Wood Panel (8) to attach Left
Metal Glide (13) and Right Metal Glide
(14) using Screws (G) as shown.
Step 6:
Attach Top Panel (11) to Right Wood
Panel (7) and slide Back Panel (9) along
the groove of Top Panel (11) as shown. .
14

Step 7:
Fix Top Panel (11) to Right Wood Panel
(7) using Cam Locks (E).
Using Wood Dowels (B), attach Stretcher
(10) to Right Wood Panel (7) as shown.
Step 8:
Attach Shelf Panel (12) to Right Wood
Panel (7). The groove of Shelf Panel (12)
is facing along Back Panel (9) as shown.
Fix Shelf Panel (12) to Left Wood Panel
(8) using Cam Locks (E).
Step 9:
Attach Wood Dowel (B) to Stretcher (10).
Then, attach Left Wood Panel (8) to Top
Panel (11) and Shelf Panel (12) as shown.
Fix Stretcher (10) to Top Panel (11) using
Screw (H) and fix Shelf Panel (12) to
Right Wood Panel (7) using Cam Locks
(E) again.
12

Step 10:
Aim at the pre-drilled holes on Right
Wood Panel (7) and Left Wood Panel (8)
to attach Rear Wine Bottle Panel (15)
using Screws (A) as shown.
Step 11:
Then, using Screws (A) again, aim at
the pre-drilled holes on Right Wood
Panel (7) and Left Wood Panel (8) to
attach Front Wine Bottle Panel (16) as
shown.
Step 12:
Attach End Caps (K) to Right Metal
Panel (17) and Left Metal Panel (18).
Then, attach Right Metal Panel (17) and
Left Metal Panel (18) using Bolts (D) as
shown.
D
D
18
K
K
K
K
D
D
17
15 15
16 16

Step 13:
Pull out Left Metal Glide (13) and Right
Metal Glide (14) first.
Then, put the assembled drawer to the
frame of drawer and aim at the pre-drilled
holes on Drawer Right Panel (2) and
Drawer Left Panel (3) to attach Left Metal
Glide (13) and Right Metal Glide (14) to
assembled drawer using Screws (G) as
shown.
Step 14:
Connecting Metal Stretchers together
using Bolts (I) and Nut (J).
Then, Attach Metal Stretchers (19) and L
Metal Chips (L) (Anti-tipping Hardware)
to Right Metal Panel (17) and Left Metal
Panel (18) using Bolts (I) as shown.
Anti-tipping Hardware Must
be Used for this product to
avoid tipping and injury
Tip: Screw must be directly mounted into
a wall stud. Wall anchor is not needed
when mounting into a wall stud.
Find an ideal location on the wall and
mark the location of the center of each
mounting hole.
Using a power drill and a 3/16″drill bit, drill
two 3/16″holes on the wall.
Note: Make sure not to drill into
electrical wiring or plumbing pipes.
FLOOR
L
M
N
540mm
775mm
G
G
G
J
L
L
I
I
I
19
19
I
I

Insert Wall Anchors (M) into the two
3/16″holes. Make sure that the wall
anchors are flush with the wall.
Tip: It may be necessary to use a
hammer to gently tap the anchors into
place.
Attach
L Metal Chips (L) to Wall
Anchors (M) u sing Phillips Head
Screws (N) and the Phillips Screwdriver
as shown.
Attach Plastic Straps (O) to L Metal
Chips (L) on the wall and wine storage
as shown.
Your Alyssa Wine Storage assembly is
now complete.
(
Q
M
L N
L
O
L
M
N

Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be honored
within this time frame.Parts will not be available for items arriving fully assembled. We do not recommend
modifying product(s) and we are not responsible for any damages due to product modification(s). If
damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to
provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri
Central time if you have product issues or email us at serv[email protected]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalo
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Customer Service 1-800-633-5096
[e-mail]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Parts Replacement Form