Sewell SW-29969 User manual

User Manual of Product 1:
Sewell Direct SW-29969 Over 175ft 1080p HD-Link HDMI Over
Single Cat5 Extender

Important
The HD-Link is designed to work over a single cable only. It will not
work over a network or through a router or switch. If you need
network functionality then look at the HD-Link Pro or HD-Link Ctrl
extenders.
For best results use only solid copper Cat6 cables such as the PureRun
Link cables designed specifically for Cat6 extenders. Many Cat6 and
Cat5e cables are Copper Clad Aluminum (CCA). CCA cables may not
be able to handle the higher bandwidth requirements of the HD-Link.
Cat5 cables are not recommended due to their lower bandwidth
capabilities.
The HD-Link uses more of the Cat6 cable than a standard internet
connection. Your cable might work to connect a computer to the
internet, but not work with the HD-Link extender.

Features
Supports a wide array of video signals including 720p and
1080p HDMI signals.
Audio Support includes DTS-HD, Dolby True HD, LPCM7.1,
DTS, Dolby-AC3, and DSD
Simple Plug and play installation
Allows you to extend HDMI signals up to 200 ft. Standard
HDMI cables are usually limited to 50 ft.
Lifetime tech support through Sewell Direct Customer
Support.

Installation Instructions
1. Connect your HDMI source (Blu-ray player, game console, or
computer) to the Sender unit with a standard HDMI cable.
2. Connect your HDMI Display (TV, projector, or monitor) to
the Receiver Unit with a standard HDMI Cable
3. Connect the sender and receiver unit with a single Cat5e or
Cat6 cable up to 200 feet in length.
Note: We recommend using pure copper cat6 such as our PureRun Link cable whenever
possible. CCA and other lower quality cat5 and cat5e cables can keep you from reaching the full
200 ft length.
4. Power both the sender and receiver unit with the included
power supplies.

Troubleshooting
Power Cycle: Unplug the power from the sender and receiver.
Turn off the source and display. Wait 30 seconds then turn on
the TV then the source followed by the sender and receiver
units.
Try a temporary test with shorter cables
Test your Cat6 Cable
Note: The HD Link uses more of the Cat6 cable than a standard internet connection. Your cable might work to connect a
computer to the internet, but not work with the HD-Link extender. A network cable tester is the best way to verify that the
cable is working.
Independently test your HDMI cables
If you still have trouble or questions about the HD-Link
extender, contact Sewell Direct technical support.

Safety
When using the HD-Link extender, avoid temperature
extremes, moisture, excessive dust, and any corrosive or
oxidative environments.
High impacts, such as from a drop or fall, can damage your
HD-Link extenders
Only use the power supplies included with the HD-Link
When disconnecting the cables from your HD-Link,
remember to always pull the connectors and not the
cables themselves

Specifications
Extends HDMI signal up to 200ft (60m) with Cat6 (pure copper cat6 preferred) or
Cat5e cable.
Supports HDMI Input/Output of 480i/p 720p, 1080i/p @24/50/60 Hz
Does not support 3D functionality
Audio Input: DTS-HD, Dolby TrueHD, LPCM 7.1, DTS, Dolby AC-3, DSD
Audio Output: LPCM7.1, DTS, Dolby AC3, DSD
Max Input/output HDMI cable: 15M w/ 26AWG HDMI Cable
Power: DC 5V 2A
Weight: 200g
Dimensions: 82mm x 44mm x 22mm
Package Contents
HDMI over Cat5e Sender Unit
HDMI over Cat5e Receiver Unit
2x Wall power Adapter
User Manual