SG RANSHOU User manual

RANSHOU Keyhole saw (160ｍｍ・200ｍｍ)
■Product introduction
Since the blade width is narrow, it is convenient for hollowing out wood and
cutting curves.
It can also be used for bonsai pruning work.
Please read this manual carefully and use it properly.
●Wear safety goggles and gloves when working.
●Do not remodel or use it for anything other than its intended purpose.
●Do not use it for materials other than wood(plastic, concrete, metal, etc.).
●Check the product for rattling or damage before use.
●Do not point the cutting edge to people and animals.
●Applying excessive force or rough handling may cause damage to the product.
●Fix the object firmly and work.
●Make sure that no foreign objects such as nails or wires are stuck in the wood.
●Do not touch the cutting edge directly as with bare hands.
●Keep out of reach of children.
Instruction manual
CAUTION
■Parts introduction
●Ejiri
●Egashira
●Hawatari
●Machi
●Mine
●Product material
Blade:High carbon steel SK85
Handle:magnolia

The narrow width of the saw allows you to cut out wooden or drywall board.
You can also cut the material into curves.
●How to cut out the board
■Care and maintenance
●After use, wipe off any dirt on the product with a dry cloth.
Then, apply the included blade oil to a dry cloth and wipe the blade.
●Keep the blade in a dry place as it is easy to rust.
1-2-50 Suguecho,Sanjo City, Niigata Prefecture,Japan
E-mail: [email protected]
URL: https://www.sgsupport.jp/
MADE IN JAPAN
Product introduction
■How to use
●Draw a marking line and
make a hole over 6mm with
a drill.
●Insert the keyhole saw into the hole and cut
along with the line.
●It can also be used for pruning bonsai.