Partner K700 ACTIVE III Setup guide

PARTNERIllustrated Parts List 2000-05 CD
K700 ACTIVE 1994-1996
K700 ACTIVE II 1997-2000
108 30 00-43

503 22 00-01
505 39 75-88
503 20 00-12
506 07 25-01
506 09 82-01
505 30 32-47
compl. 505 30 32-37
compl. 506 07 37-01
505 27 57-15
503 23 01-11
505 30 24-15
505 26 83-03
compl. 506 03 06-02
503 20 30-09
503 22 66-01
506 21 95-01
503 22 00-01
506 02 92-01
503 20 00-45
506 27 67-41
506 03 00-01
503 23 01-04
506 02 86-01
506 03 62-01
506 03 62-02
506 03 45-01
503 20 00-04
506 14 32-01
506 02 91-02
506 03 32-02
503 25 21-01
AB
506 02 84-01
506 03 62-04
506 26 75-01
506 29 83-64
506 07 07-01
506 02 87-01
503 20 00-03
506 13 95-11
506 13 96-01
506 03 88-01
Ø 20mm 506 03 95-20
Ø 7/8”, 22.2 506 03 95-22
Ø 1”, 25.4 506 03 95-25
Ø 30.5 506 02 88-30
506 02 98-04
506 02 95-03
503 23 00-05
506 02 96-01
506 21 21-01
735 31 09-20
compl. 14”
506 13 82-01
14”- 506 28 40-12, Ø 20 mm
14”- 506 28 40-14, Ø 1”

C
E
505 35 01-50 505 30 23-33
Crankshaft compl.
503 15 80-01
735 88 06-00
D
503 20 00-09
503 20 00-05
503 55 22-01
503 71 53-01
506 21 28-01
506 21 27-02
503 49 10-01
503 28 90-17
503 20 00-05
737 43 12-00
Piston compl. 506 09 90-01 (non EPA)
Piston compl. 505 34 11-62 (EPA)
Cylinder compl. 506 09 92-12 (non EPA)
Cylinder compl. 506 24 37-12 (EPA)
503 25 00-01
ote: When installing, place the tapered side of the
inside bearing race towards the co nter weight.
”Non EPA” Style
”EPA” Style

G506 26 29-01
503 40 27-01
503 20 00-07*
503 20 00-08*
*
506 03 32-02*
503 25 00-01*
720 13 07-10*
503 57 89-01
506 25 59-22
506 26 41-01
506 27 11-01
503 44 31-01*
*
506 29 21-01
504 35 72-01
501 76 83-04
506 23 61-01
506 21 91-01
compl.
506 07 11-13
501 76 83-26
506 25 61-01
505 27 57-15 (X2)
*Crankcase compl. 506 07 66-03
F
503 20 21-75
“SmartCarb”
Fixed jet carburetor (”EPA”)
ote: Use only on saws eq ipped
with Green Ignition System
“SmartCarb”
Proper Adjustment
L = 1-11/8
H = 3/4-7/8
OTE:
Replace All black gas caps with a
yellow cap.
Contact Partner
Early Active saws se a black plastic f el tank with the filler cap by the starter assembly (left side). This tank is
s perseeded with a transl cent tank with the filler cap on the right side.
506 23 52-02
(Yellow f el cap)
503 23 00-42
compl. 506 25 71-02
505 27 90-60
503 49 09-01
503 49 08-01 506 09 64-01
506 25 33-01
506 22 88-02
506 25 34-01
506 21 41-01 (Black)
506 31 88-01
740 42 01-00
506 09 64-01
Carburetor kit:
compl. 506 32 15-01
506 26 85-01
(Yellow)
506 27 98-01
(Blue)
compl. 506 26 41-11
506 31 74-01*
For b shing repair instr ctions
see ”TechTips” n mber 4-3

506 21 79-01
506 22 63-01
503 20 34-42
**506 28 39-30
**506 25 82-01
503 20 02-90
**compl. 506 21 78-12
506 28 39-30
*compl. 506 21 77-14
506 22 23-01
506 22 24-01
725 52 95-55
503 20 00-03
506 21 98-01
H
506 23 93-01*
506 22 42-01
506 23 64-34 USA Std
506 27 84-21 USA EPA
506 27 84-23 Canada EPA
506 23 53-02 "Active"
506 23 53-05 "Active II"
506 27 84-22 (CE)
Decompression Valve
Push before starting
506 32 21-02

*503 12 79-02
J
K501 48 54-02
503 84 50-01**
505 27 75-16**
501 81 99-01*
503 23 01-01
503 22 21-01
*compl. 506 21 86-02
503 23 00-42*
501 63 48-01*
501 67 32-03*
725 52 95-55
**compl. 503 90 17-01
503 41 18-02
RCJ 7Y
503 23 51-08
506 21 89-02*
*506 25 89-01
*506 29 85-01
503 20 34-25
*506 23 54-02
503 20 34-19
*503 21 28-10
*506 25 81-01
*506 25 30-01
*506 26 31-01
*740 43 13-00
506 25 14-01*
503 21 07-22*
506 21 90-01
503 21 28-10*
Standard Starter
Parts
503 21 07-22 dia. 3/16"
503 21 05-16 dia. 1/4"
503 23 00-24
503 43 21-04
White
503 43 19-01
White
DuraStarter
*Starter compl. 506 25 95-01
ote:
See the Owner's Manual for starter repairs
Blue
Blue
(Green ign. with governor)

L
M
735 58 18-00
505 34 07-95
505 26 94-27 503 23 00-11
505 26 76-73
505 27 91-03
505 27 95-11 503 20 00-08
505 29 56-14
505 27 91-04
505 34 07-54
503 20 00-01
506 22 44-01
721 42 58-20
503 15 59-02
503 22 65-04
506 22 48-01
503 21 28-10
506 22 45-01
506 26 30-01 compl.
506 26 28-01
503 40 17-01
721 42 58-20
503 40 13-02
503 20 00-01
503 20 00-10
721 42 58-20
N506 03 99-01
503 20 00-35
503 20 00-05
503 20 00-35
506 14 42-01
505 27 95-13
503 22 65-04
506 07 26-04
732 21 14-01
503 20 00-06
503 20 00-16
503 20 00-07
506 14 43-01
506 14 43-01
503 20 00-07
503 20 00-04
503 20 00-04
506 29 65-01
503 22 65-04
732 21 14-01
503 23 00-35
For assembly instr ctions see
”TechTips” n mber 4-4

OCompl. 503 28 04-04 - Adjustable Jets
Tillotson HS 175G ”SmartCarb”
Compl. 506 32 15-01 - Fixed Jets, ”EPA”
Tillotson HS 175K ”SmartCarb”
(See below for specific parts)
Use only with ”Green Ignition” system
503 48 63-01
503 53 36-01
506 25 64-02 (Green)
506 25 85-01*
506 25 84-01*
501 48 52-01
501 22 21-01
501 22 20-01
501 22 25-01
501 22 23-01 (175 E,F)
506 25 86-01
501 48 50-01
503 65 30-01
501 82 18-01
503 23 01-02
503 53 40-01
505 31 64-95
501 22 24-01
505 31 64-95
505 31 66-05
501 42 71-01
503 65 27-01
505 31 65-50 (175 G,H,K)
501 22 02-01
501 22 03-01
503 77 98-01
501 22 05-01
503 57 86-01
505 31 66-19 503 47 83-01
506 23 83-01
503 65 27-01
501 22 17-01
506 23 82-01
505 31 64-58
503 57 87-01
501 26 85-01
501 26 89-01
501 22 04-01
506 25 64-01 (Bl e)
501 22 12-01*
501 22 14-01
501 22 15-01
501 22 13-01*
506 27 63-01 506 25 88-01
Repair kit
Diaphragm
and gasket
set
RK 31HS
Repair kits fit all Tillotson 175
series carburetors
Compl. 506 32 15-01 - Fixed Jets, ”EPA”
Tillotson HS 175K ”SmartCarb”
503 65 27-01
501 82 18-01
506 23 83-01
506 29 12-01
506 27 56-01
506 31 61-01
506 31 15-01 (Yellow)
503 65 25-01

o. Pos. Description
501 22 03-01 O Plug
501 22 04-01 O Ball
501 22 05-01 O Spring
501 22 12-01 O Fuel pump diaphragm
501 22 13-01 O Gasket, pump side
501 22 14-01 O Cap
501 22 15-01 O Screw
501 22 17-01 O Spring
501 22 20-01 O Lever
501 22 21-01 O Shaft
501 22 23-01 O Inlet needle, large
501 22 24-01 O Filter
501 22 25-01 O Spring
501 26 85-01 O Idle adj. screw
501 26 89-01 O Needle H
501 42 71-01 O Bushing
501 48 50-01 O Gasket
501 48 52-01 O Screw
501 48 54-02 K Spark plug conn. kit
501 50 24-01 O Governor
501 60 68-01 G Clamp
501 63 48-01 K Spring
501 67 32-03 K Pawl
501 69 17-02 P Comb. tool
501 76 83-04 G Hose
501 76 83-26 G Hose, 245 mm
501 81 99-01 K Screw M5x14
501 82 18-01 O Retaining ring
503 12 79-02 J Starter handle
503 14 90-01 N Foot
503 15 59-02 M Bracket right
503 15 80-01 E Crankshaft
503 20 00-01 L,M Screw M6SF 5x20
503 20 00-03 H Screw M6SF 5x12
503 20 00-04 A,N Screw M6SF 5x16
503 20 00-05 C,D,N Screw M6SF 5x25
503 20 00-06 N Screw M5x35
503 20 00-07 G Screw M6SF 5x40
503 20 00-08 G,L,N Screw M6SF 5x30
503 20 00-09 D Screw M6SF 5x45
503 20 00-10 M Screw M6SF 5x55
503 20 00-12 B Screw M6SF 5x70
503 20 00-16 N Screw M5x28
503 20 00-35 N Screw
503 20 00-45 A Screw
503 20 02-90 H Screw
503 20 21-75 F Screw
503 20 30-09 A Screw
503 20 32-42 H Screw
503 20 34-19 J Screw
503 20 34-25 J Screw
503 20 34-42 H Screw
503 21 05-16 J Screw - dia. 1/4"
503 21 06-32 N Screw
503 21 07-22 J Screw
503 21 28-10 J,M Screw
503 22 00-01 A,B Nut M6MF M5
503 22 21-01 K Lock nut M8x1
503 22 65-04 M,N Nut
503 22 66-01 A Nut
503 23 00-05 A Washer 6.5x11
503 23 00-11 L Washer 5.3x12
503 23 00-24 J Washer - 6.4 x 18
503 23 00-42 F,K Washer
503 23 01-01 K Washer 8.4x16
503 23 01-02 O Washer 5.25x9
503 23 01-04 A Washer 15x21
503 23 01-11 B Washer
503 23 51-08 K Spark plug RCJ7Y
503 25 00-01 E,G Ball bearing
503 25 21-01 A Ball bearing 62022RS
503 26 02-04 G Sealing ring
503 28 04-04 F,O Carburetor
503 28 90-17 C Piston ring
503 40 13-02 M Bracket left
503 40 17-01 M Contact spring
503 40 27-01 G Spacer
503 41 18-02 K Cable
503 43 19-01 J Spring, white
503 43 21-04 J Pulley, white
503 44 31-01 G Gasket
503 47 83-01 O Shutter
503 48 63-01 O Cover screw
503 49 08-01 F Gasket
503 49 09-01 F Gasket
503 49 10-01 C Gasket
503 53 36-01 O Cover
503 53 40-01 O Nipple
o. Pos. Description o. Pos. Description
503 55 22-01 C Plug
503 57 86-01 O Ball
503 57 87-01 O Screw
503 57 89-01 G Holder
503 65 25-01 O Governor
503 65 27-01 O Screw
503 65 30-01 O Washer
503 71 53-01 C Valve decompr.
503 77 98-01 O Valve
503 84 50-01 K Cable
503 90 17-01 K Ignition (Green)
504 35 72-01 G Fuel filter
505 26 76-73 L Spacer
505 26 83-03 B Cover
505 26 94-27 L Throttle rod
505 27 57-15 B Seal ring
505 27 75-16 K Insulating cap
505 27 90-60 F Insul. flange
505 27 91-03 L Throttle control
505 27 91-04 L Throttle catch
505 27 95-11 L Absorber
505 27 95-12 N Absorber
505 27 95-13 N Absorber
505 29 56-14 L Spring
505 30 23-33 E Needle bearing
505 30 24-15 B Needle bearing
505 30 32-37 B Clutch
505 30 32-47 B Centrif. weight
505 30 51-20 J Starter rope
505 31 64-58 O Pressure spring
505 31 64-95 O X-ring
505 31 65-50 O Needle
505 31 66-05 O Spring
505 31 66-19 O Throttle shaft
505 34 07-54 L Handle, left half
505 34 07-95 L Handle, right
505 34 11-62 C Piston cpl 50 mm
505 35 01-50 D Silencer
505 39 75-88 B Decal
506 02 73-04 K Ignition module
506 02 84-01 A Washer
506 02 86-01 A Spacer
506 02 87-01 A Washer
506 02 88-30 A Bushing
506 02 91-02 A Bearing housing
506 02 92-01 A Guard
506 02 95-03 A Hose - 14" Guard
506 02 96-01 A Spring
506 02 98-04 A Rod - 14" Guard
506 03 00-01 A Pulley
506 03 06-02 A Adjuster
506 03 32-02 A,G Screw
506 03 45-01 A Washer
506 03 62-01 A Spacer (rubber)
506 03 62-02 A Spacer (rubber)
506 03 62-04 A Spacer (plastic)
506 03 88-01 A Warning label
506 03 95-20 A Bushing
506 03 95-22 A Bushing
506 03 95-25 A Bushing
506 03 99-01 N Support
506 07 07-01 A Flange, support
506 07 11-13 G Vent cpl
506 07 25-01 B Cutting arm
506 07 26-02 N Handle
506 07 26-04 N Front Handle
506 07 37-01 B Drive wheel
506 07 66-03 G Crankcase cpl
506 07 66-03 G Crankcase Complete
506 09 64-01 F Gasket
506 09 82-01 B Clutch spring
506 09 90-01 C Piston assy
506 09 92-12 C Cylinder cpl
506 13 95-11 A Washer
506 13 96-01 A Screw
506 14 32-01 A Catch
506 14 42-01 N Support
506 14 43-01 N Support Feet
506 21 21-01 A Washer
506 21 23-01 H Gasket
506 21 27-02 C Gasket
506 21 28-01 C Deflector
506 21 41-01 F Intake (black)
506 21 77-14 H Cyl.Cover 650/700
506 21 78-11 H Filter holder
506 21 78-12 H Filter Bottom
506 21 79-01 H Filter cover
506 21 86-02 K Flywheel compl.
506 21 89-02 J Starter housing
506 21 90-01 J Air conductor
506 21 91-01 G Grommet
506 21 95-01 A Spring
506 21 98-01 H Air jet
506 22 23-01 H Sealing
506 22 24-01 H Sealing
506 22 42-01 H Air filter
506 22 44-01 M Guide
506 22 45-01 M Choke control
506 22 48-01 M Holder
506 22 63-01 H Filter
506 22 88-02 F Guide
506 23 52-02 P, G Gasket Set
506 23 53-02 H Decal - Active
506 23 53-05 H Decal - Active II
506 23 54-02 J Decal
506 23 61-01 G Tank vent.
506 23 64-31 H Decal, CE
506 23 64-34 H Warning Decal
506 23 64-35 H Decal, USA
506 23 82-01 O Choke shaft
506 23 83-01 O Choke flap
506 23 93-01 H Decal
506 24 37-12 C Cylinder cpl.
506 25 14-01 J Washer
506 25 30-01 J Spring
506 25 33-01 F Seal holder
506 25 34-01 F Rubber seal
506 25 59-22 G Tank cap
506 25 61-01 G Tank unit
506 25 64-01 O Insert - Smart Carb
506 25 64-02 O Insert
506 25 71-02 F Smart Carb-Active Only
506 25 71-02 F Carburetor - Smart Carb
506 25 81-01 J Starter pulley
506 25 82-01 H Guard
506 25 84-01 O Gasket
506 25 85-01 O Diaphragm
506 25 86-01 O Governor
506 25 88-01 O Diaphragm kit
506 25 89-01 J Return spring
506 25 95-01 J Starter device
506 26 28-01 M Spring
506 26 29-01 G Protector
506 26 30-01 M Knob
506 26 31-01 J Sleeve
506 26 41-01 G Filter
506 26 41-11 G Filter cpl
506 26 75-01 A Slurry guard
506 26 85-01 F Rubber seal
506 27 11-01 G Weight
506 27 56-01 O Choke shaft
506 27 63-01 O Repair kit
506 27 64-01 O Diaphragm and gasket set
506 27 67-41 A Belt
506 27 84-21 H Label USA EPA
506 27 84-22 H Label CE
506 27 84-23 H Label - Canada EPA
506 27 98-01 F Air horn with seal
506 28 39-30 H Sealing
506 28 40-14 A Guard Label 14" - 1"
506 28 94-01 F,O Carburetor, fixed jets
506 29 10-01 O Seal kit
506 29 12-01 O Seal kit
506 29 21-01 G Gasket
506 29 65-01 N Absorber
506 29 83-64 A Shaft
506 29 85-01 J Starter Rope
506 31 15-01 O Insert - Yellow
506 31 61-01 O Cover
506 31 74-01 G Bushing
506 31 88-01 F Air horn (yellow)
506 32 15-01 F Carburetor cpl
506 32 21-02 H Label - Decomp Valve
720 13 07-10 G Pin
721 42 58-20 M Spring pin 4x24
725 52 95-55 H,K Screw MC6S 4x20
725 53 27-55 A Screw MC6S 5x12
732 21 14-01 N Locknut
735 31 09-20 A E-ring 5
735 58 18-00 L Lock washer 2.4
735 88 06-00 E Woodruff key
737 43 12-00 C Retaining ring
738 22 02-29 A Ball bearing 6202-2RS1
740 42 01-00 F O-ring
740 43 13-00 J O-ring

Step 1
Drill the existing hole with a 9.0 mm, drill
bit. Drill the hole clear through into the
cavity underneath.
Note: It is not necessary to remove the
cylinder and carburetor.
Step 2
Remove the flywheel.
Insert the repair bushing into the hole through the opening in the
crankcase under the flywheel.
Note the location of the flat spot on the bushing
Stripped thread
or bushing
9 mm Drill Bit
(No substitute)
Part # 506 31 74-01
Step 3
Pull the bushing into place by using a M5 screw such as the rear handle screw.
Thread Repair Bushing Part # 506 31 74-01
Partner offers a simple repair to a stripped-out thread or threaded bushing for the cylinder cover on the K650/K700 ACTIVE
saws. The threaded insert can be installed without removing the cylinder.
PARTNER
TechTips
Index: 4-3
Date: Aug 99

PARTNER
TechTips
Index: 4-4
Date: Aug 99
Assembly of Rear Handle K650/K700 and K1200
When the handle is apart, follow these steps for re-assembly.
1. Insert the longer handle screw into this hole in the left
handle half . This screw acts as a pivot for the trigger.
2. Install the washer, trigger and sleeve onto the screw.
3. Install the spring on the post identified in the drawing
and insert the hook on the spring into matching hole on the
trigger.
4. Install the throttle lockout.
5. Set the fast idle button by pressing on the throttle
lockout and the trigger simultaneously. The fast idle button
effectively holds the parts in place.
6. Install the handle assembly onto throttle linkage.
Fast idle
button