
6.When charging, a little heat will be generated, which is a normal phenomenon and will not affect the
use of the product. However, if you feel that the phone battery or disinfection box is overheated, please
disconnect the power supply of the disinfection box and try to charge it after it cools down
7. During the warranty period, free maintenance service shall be provided for any fault or damage
caused by the quality problem of the product; if the product is damaged due to accident, voltage
instability and force majeure, it shall not be covered by the warranty.
Technical parameters:
,)Product model :VH-WB01
-)Aromatherapy power ,
.)Wireless charging power:10W
4.Disinfection power :+-*& !+.
5.Number of UV beads:6pcs
6.UV lamp bead power:2W
7.Input voltage/current:5V/2A 9V/2A
8.Output voltage/current:9V/1.1A
9.Transmission distance:2-6mm
10.Charging efficiency 80%
11.Product size:
,-)! # (
,.) (#
,/) ! (
%(! #%
(! ##
!(! !
$ (!
,) # $ # ' !
# ## )
-) '! ")
.) ' " $)
Instructions for disinfection function:
1. Short press the disinfection switch button to turn on the disinfection mode.
2. Short press the switch button, the green light is on, indicating that the disinfection mode is in progress,
and you will hear a "beep". (It can kill 99.9% of Staphylococcus aureus and Escherichia coli.)
3. When disinfection is in progress, when the cover is opened, in order to prevent slight burns to the eyes,
the disinfection lamp will go out. When the lid is closed, the sterilization procedure will resume.
4. When the disinfection time reaches 5 minutes, you will hear three beeps. The indicator light flashes
three times and then goes out, indicating that the disinfection is completed.
WE ADVOCATE WE PROMOTE AND WE SELL
www.sglco.com
sales@s
lco.com