ShadeLab HEKK User manual

Assembly manual

INDEX
1 - INTRODUCTION .................................................................................................................................. pag. 2
1.1 - Symbols used in the manual....................................................................................................... pag. 2
1.2 - Personnel requirements ............................................................................................................. pag. 2
1.3 - Equipment necessary................................................................................................................. pag. 3
1.4 - Before starting assembly ........................................................................................................... pag. 3
2 - SAFETY ............................................................................................................................................. pag. 4
2.1 - General safety information ......................................................................................................... pag. 4
2.2 - Working environment................................................................................................................. pag. 4
3 - HEKK - ASSEMBLY TECHNICAL TABLES AND DRAWINGS ................................................................ pag. 5
3.1 - Table of cutting dimensions ....................................................................................................... pag. 5
3.2 - HEKK Technical sheet ............................................................................................................... pag. 6
3.3 - HEKK Assembly ........................................................................................................................ pag. 10

2I HEKK I ASSEMBLY – REV 00
1 – INTRODUCTION
This “assembly manual” for ILIOS awnings has been produced by SHADELAB to supply the indications
necessary for the operations of assembling the components that make up the product.
Assembly must be carried out by personnel with suitable technical and professional qualifications, in
accordance with the respective national laws or regulations (see Par. 1.2 “Personnel requirements”).
It is forbidden to eliminate, rewrite or alter the pages in the manual and their content.
This manual must be kept intact in all its parts, in an easily accessible place.
SHADELAB reserves the right to update the production and the respective manuals, without being obliged
to update the previous production and manuals.
SHADELAB reserves all rights to this manual: no total or partial reproduction is allowed without authorisation
in writing.
1.1 - Symbols used in the manual
Shown below are the WARNING symbols used in this manual:
1.2 - Personnel requirements
The personnel appointed to perform this operation must possess a technical knowledge of the product,
acquired by assembling similar products for at least one year or after having followed a suitable technical
training course.
IMPORTANT
Indications and advice to be observed to ensure a correct use of the awning. Failure to follow these
indications may endanger the integrity and/or resistance of the product.
ATTENTION
DANGER FOR THE OPERATOR! Instructions and indications to be assessed and followed with care.
Failure to follow these indications may endanger personal safety.

3 I HEKK I ASSEMBLY – REV 00
1.2- Equipment necessary
To ensure the correct assembly of the mechanical part, of the textile part, and consequently the optimum
operation of the finished product, it is necessary to be in possession of the following equipment:
» fabric rolling frame;
» awning assembly frame with arms and vertically movable positioning bar;
» electric and pneumatic screwdriver;
» complete set of tools.
1.3- Before starting assembly
IMPORTANT
Some components must be cut to suit the dimensions of the awning that is to be obtained (see Par.
3.3 “Table of cutting dimensions”).

4I HEKK I ASSEMBLY – REV 00
2 – SAFETY
2.1- General safety information
Follow these safety precautions:
2.2- Working environment
At the moment of assembly, good natural and/or artificial lighting must be created in the place where the
work is being done.
ATTENTION
Wear the garments and personal protection equipment contemplated by the safety regulations in force
for the workplace (protective helmet, gloves, etc.).
ATTENTION
It is forbidden to use the awning to support yourself: risk of serious personal injury and of damage to
the awning itself.
IMPORTANT
Do not lay objects on the awning.
IMPORTANT
This manual is an integral part of the product. Before assembly, carefully read all the instructions given
in this manual.
IMPORTANT
SHADELAB guarantees the EC marking only for products supplied by the company itself. If any parts
have to be replaced with other components not guaranteed by SHADELAB, the product guarantee will
automatically become void and SHADELAB shall not answer for any malfunctions of the product.
ATTENTION
Some awning components are constantly subject to strong pressure (arms) and, if the instructions in
this manual are not carefully followed, these components may cause serious harm to persons, animals
and things.

5 I HEKK I ASSEMBLY – REV 00
3 – HEKK - ASSEMBLY TECHNICAL TABLES AND DRAWINGS
3.1– Table of cutting dimensions
Cutting dimensions
COMPONENT/motor Cutting ration in [mm]
COVER PROFILE L-88
CASSETTE PROFILE L-88
TERMINAL PROFILE L-110
ROLLER TUBE L-70
FABRIC L-125
ATTENTION : THE POSITION OF A FABRIC is 30 mm FROM THE EDGE OF THE
ROLL ON THE SIDE OF THE SPRING

6I HEKK I ASSEMBLY – REV 00
3.2- HEKK Technical sheet
Sizes – side view
Fixing bracket

7 I HEKK I ASSEMBLY – REV 00
Sizes – front view, closed awning

8I HEKK I ASSEMBLY – REV 00
Sizes – front view, opened awning

9 I HEKK I ASSEMBLY – REV 00
Componests

10I HEKK I ASSEMBLY – REV 00
3.3– HEKK Assembly
Brackets position for Hekk on the wall
Define the distance of the brackets and position them on the awning assembly frame.
Hekk frontal opening

11 I HEKK I ASSEMBLY – REV 00
ATTENTION: On the top the support written DX, and in the opposite site the support written SX
ATTENTION: Use the existing holes number 2

12I HEKK I ASSEMBLY – REV 00
Example assembling Hekk to frontal opening
Plate side
Spring side

13 I HEKK I ASSEMBLY – REV 00
assembling the first profile
ATTENTION: used the holes number 2
assembling the roll and the fabric
ATTENTION: look the direction of the fabric

14I HEKK I ASSEMBLY – REV 00
assembling terminal bar and handle
ATTENTION: make two holes Ø6,5 and two holes Ø10 in the right position
assembling the cover profile

15 I HEKK I ASSEMBLY – REV 00
assembling the cover profile
ATTENTION: How to lock the cover profile
Assembling coupling gasket
ATTENTION: there are two gasket
s to insert

16I HEKK I ASSEMBLY – REV 00
Assembling the terminal bar
Assemble the terminal bar ins
erting the fabric in the ogive
in the terminal bar
End caps and adaptors for terminal bar
ATTENTION: assembling the end caps and the adaptor as in picture

17 I HEKK I ASSEMBLY – REV 00
Righ support with spring
ATTENTION:
insert the pin to lock the profile (K).
ATTENTION: insert the spring on the roller tube and rotate the support 9 laps ( step1).
ATTENTION: locked the support with the screws (step 2)
Fixing the cover profile
ATTENTION: Open little the terminale bar and locked the cover profile

18I HEKK I ASSEMBLY – REV 00
lock the and caps for cassette
Awning installation Hekk to frontal opening
ATTENTION: Place the box in correspondence of the brackets (1)
ATTENTION: Screw the M8 nuts until they are firmly tight (2)