Yamaha EMR-1 User manual
Thank you for purchasing aYamaha EMR-I Digital Drummer. The EMR-I is a sophisticated but easy-to-use Digital
Drummer designed primarily for use with Yamaha Clavinova, PortaTone and PortaSound instruments, and which incor-
porates the very latest Yamaha technology. In order to obtain maximum performance, we urge you to read this User's
Guide thoroughly before using your
EMR-l,
and keep the manual in a safe place for later reference.
I
Contents
Page
1. The Power Supply 2
2. Description of Controls and Connectors 3
3. System Examples 5
4. Operation 6
5. MIDI Control 14
I
Precautions...
READ
THIS
FIRST!
Page
6. Troubleshooting 17
7. MIDI System Realtime Message
Information.
17
8. MIDI System Exclusive Message Information 18
9. Specifications 18
To ensure safe, reliable operation
of
your EMR-I, please read the following precautions carefully.
[J]
...
Chossing aLocation for your
EMR·1
Avoid placing the EMR-I in the following locations to
prevent possible damage:
•Locations exposed to direct sunlight or near sources
of
heat.
• Excessively cold locations.
•Locations exposed to high humidity or excessive dust.
•Locations subject to vibration or shock.
•Locations next to transformers or motors (e.g. refrig-
erators or similar heavy equipment), fluorescent lighting
fixtures, television receivers, etc. This type
of
equipment
emits electrical noise which may cause a buzzing or hum-
ming sound from the
EMR-l.
l)
...
Never Apply Unnecessary Force
The EMR-I is a precision electronic device, and can be
damaged if dropped or subject to strong physical shocks.
Handle it with care.
n
...
The Power Supply
Use ONLY the specified power supply for the
EMR-l,
and always turn the power switch OFF and disconnect the
power adaptor from the AC wall outlet after use.
Cautions:
Do not place the AC power adaptor on top of the EMR-I.
~
•••
External Cleaning
Clean the outer case with a soft, dry cloth. Never use
solvents such as benzine or thinner, as these can damage
the finish.
C···Connection
with
Other Devices
Before connecting the EMR-I to a keyboard or other
electronic device, make sure the power to both devices is
turned OFF. Also make sure the power is OFF when
connecting or disconnecting the optional FC-5 footswitch.
Other manuals for EMR-1
4
Table of contents
Other Yamaha Signal Processor manuals
