08
ASSEMBLY
INSTRUCTIONS
NOTE : A Philips head screwdriver is required.
1. Release the lock button 2. Lift the top cover 3. Remove the contents from inside
the collection tank; make sure you
have all contents as listed on
4. Turn the collecon tank
upside down and insert the
four casters into the slots on
the collecon tank. Apply
downward pressure unl the
casters snap into place
5. Insert the handle into the
slots located on the top of
the power head and secure
it with the screws provided.
Do not over ghten the screws.
WARNING
Electrical Shock Hazard.
DO NOT plug into electrical supply unti assembly is complete. Failure to do so
could result in electrical shock or injury. To reduce the risk of electric shock, do
not expose to rain.
Vacuum Cleaner
6. Place the top cover
back on the collecon tank
and secure it in place using
lock buon.
