Shark 250 Series IC205 Series UF280 Series User manual

IF200/250
IC205
UF280
Series
INSTRUCTIONS
with DuoClean®
IONFLEX™2X
sharkclean.com
IONFLEX™

1 2sharkclean.com sharkclean.com
CONTENTS
THANK YOU
for purchasing the Shark® IONFLEX™ with DuoClean™
Important Safety Instructions� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3
Getting To Know Your Shark® IONFLEX™ with DuoClean® � � � � � � � � � � � � � � � � 6
Using Your ION Power Pack Battery � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7
Installing Your ION Power Pack Battery � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7
Charging Your ION Power Pack Battery � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7
Using the ION Power Pack Battery Charger� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7
Using the ION Power Pack Battery Charging Dock � � � � � � � � � � � � � � � � � � � � � � � � 7
LED Battery Power Meter � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7
Recycling Your ION Power Pack Battery� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7
Assembling Your Vacuum � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8
Using the MultiFLEX™ wand � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9
MultiFLEX Storage � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �9
Using Smart Response™ Technology � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10
Choosing a Surface Setting � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10
Choosing a Suction Setting � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10
Using Your Vacuum in Above-Floor Mode � � � � � � � � � � � � � � � � � � � � � � � � � � � � 11
Accessories � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 13
Maintaining Your Vacuum � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 15
Emptying the Dust Cup� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 15
Cleaning the Filters� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 16
Maintaining the Brushroll � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 17
Maintaining the Soft Roller � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 18
Checking for Blockages� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 18
Troubleshooting Guide� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 19
Warranty � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 21
Battery Warranty� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 22
PLEASE READ CAREFULLY AND KEEP
FOR FUTURE REFERENCE�
This instruction manual is designed to help
you get a complete understanding of your new
Shark IONFLEX with DuoClean.
If you have any questions please visit the
product support page online www.sharkclean.
com or call us 1-800-798-7398
TECHNICAL SPECIFICATIONS
Voltage: 25.2V
Watts: 300W
Amps: 11.9A
TIP: You can find the
model and serial numbers
on the QR code label which
is located on the bottom of
the dust cup.
RECORD THIS INFORMATION
Model Number: ��������������������������������������
Serial Number: ��������������������������������������
Date of Purchase (Keep receipt): �����������������������
Store of Purchase: �����������������������������������
REGISTER YOUR PURCHASE
registeryourshark.com
Scan QR code using mobile device

3 4sharkclean.com sharkclean.com
THE DUOCLEAN™FLOOR
NOZZLE, WAND, AND HANDHELD
VACUUM CONTAIN ELECTRICAL
CONNECTIONS:
• These are NOT serviceable parts.
• DO NOT use to vacuum any liquids.
• DO NOT immerse in water when cleaning.
• If handheld vacuum/wand is damaged,
discontinue use.
1To avoid fire, explosion, or injury, inspect
ION Power Pack and chargers for any
damage before use. DO NOT use vacuum
cleaner with a damaged power pack or
charger.
2 DO NOT use outdoors or on wet surfaces.
Use only on dry surfaces.
3If vacuum cleaner is not working as it
should, or has been dropped, damaged,
left outdoors, or immersed in water,
return it to SharkNinja Operating LLC for
examination, repair, or adjustment.
4DO NOT handle charger or vacuum
cleaner with wet hands.
5DO NOT leave vacuum cleaner
unattended while in operation.
6Keep power pack away from heated
surfaces.
7Always turn off this appliance before
connecting or disconnecting floor nozzle.
8 Use only Shark®chargers and batteries.
Other types of batteries may burst, causing
injury and damage.
9Use ION Power Pack Charging Dock on
flat and stable surfaces only.
10 DO NOT incinerate appliance, even if it is
severely damaged, as power pack may
explode in a fire.
GENERAL USE
11 DO NOT hang vacuum cleaner from
wall mount when MultiFLEX™Wand is in
storage mode.
12 Use only as described in this manual.
13 Keep your work area well lit.
14 Keep the vacuum cleaner moving over
the carpet surface at all times to avoid
damaging the carpet fibers.
15 DO NOT place vacuum cleaner on
unstable surfaces such as chairs or tables.
16 DO NOT put any objects into openings.
DO NOT use with any opening blocked;
keep free of dust, lint, hair, and anything
that may reduce airflow.
17 DO NOT allow young children to operate
the appliance or use as a toy. Close
supervision is necessary when any
appliance is used near children.
18 DO NOT use without Soft Roller, dust cup
door, and all filters in place.
19 DO NOT use if airflow is restricted; if the air
paths or the floor nozzle become blocked,
turn off the vacuum cleaner and remove
battery. Clear all obstructions before
returning battery to vacuum and powering
on again.
20 Keep floor nozzle away from hair, face,
fingers, uncovered feet, or loose clothing.
21 Only use manufacturer’s recommended
attachments.
22
DO NOT charge power pack at
temperatures below 50°F (10°C) or above
104°F (40°C).
23 Store the appliance indoors. DO NOT use
or store it below 37.4°F (3°C). Ensure the
appliance is at room temperature before
operating.
DUST CUP/FILTERS/ACCESSORIES
Before turning on the vacuum:
24 Make sure that all filters are thoroughly dry
after routine cleaning.
25 Make sure brushroll, Soft Roller, dust cup
door, and all filters are in place after routine
maintenance.
26 Make sure accessories are free of
blockages and keep openings away from
face and body.
27 Use only Shark®brand filters and
accessories. Using other brands will void
warranty.
GENERAL CLEANING
28 DO NOT vacuum up hard or sharp objects
such as glass, nails, screws, or coins that
could damage the vacuum cleaner.
29 DO NOT vacuum up drywall dust,
fireplace ash, or embers. DO NOT use
as an attachment to power tools for dust
collection.
30 DO NOT vacuum up smoking or burning
objects such as hot coals, cigarette butts,
or matches.
31 DO NOT vacuum up flammable or
combustible materials (e.g., lighter fluid,
gasoline, or kerosene) or use vacuum in
areas where they may be present.
32
DO NOT vacuum up toxic solutions (e.g.,
chlorine bleach, ammonia, or drain cleaner).
33 DO NOT use in an enclosed space
where vapors are present from paint,
paint thinner, moth-proofing substances,
flammable dust, or other explosive or toxic
materials.
34 DO NOT vacuum up any liquids.
35 DO NOT immerse vacuum cleaner in water
or other liquids.
36 Use extra care when cleaning on stairs.
CONTINUED ON PAGE 5
SAVE THESE INSTRUCTIONSIMPORTANT SAFETY INSTRUCTIONS
FOR HOUSEHOLD USE ONLY • PLEASE READ CAREFULLY BEFORE USE
WARNING
To reduce the risk of injury, fire, electric shock, and property damage
resulting from improper use of the appliance, carefully observe the following
instructions� This unit contains electrical connections and moving parts that
potentially present risk to the user�
BATTERY REMOVAL AND DISPOSAL
This product uses a Lithium-ion rechargeable and
recyclable battery. When the battery no longer holds
a charge, it should be removed from the vacuum and
recycled. DO NOT incinerate or compost the battery.
When your Lithium-ion battery needs to be replaced, dispose
of it or recycle it in accordance with local ordinances or
regulations. In some areas, it is illegal to place spent Lithium-
ion batteries in the trash or in a municipal solid waste stream.
Return spent battery to an authorized recycling center or to
retailer for recycling. Contact your local recycling center for
information on where to drop o the spentbattery.
For more information on battery removal for disposal, please
visit sharkclean.com/batterysupport.
The RBRC™ (Rechargeable Battery Recycling Corporation)
seal on the Lithium-ion battery indicates that the costs to
recycle the battery at the end of its useful life have already
been paid by SharkNinja. In some areas, it is illegal to
place spent Lithium-ion batteries in the trash or municipal
solid waste stream and the RBRC program provides an
environmentally conscious alternative.
RBRC, in cooperation with SharkNinja and other battery
users, has established programs in the United States and
Canada to facilitate the collection of spent Lithium-ion
batteries. Help protect our environment and conserve
natural resources by returning the spent Lithium-ion
battery to an authorized SharkNinja service center or to
your local retailer for recycling. You may also contact your
local recycling center for information on where to drop o
the spent battery, or call 1-800-798-7398.
R
E
C
Y
C
L
E
1
.
8
0
0
.
7
9
8
.
7
3
9
8
RBRC
NiMh
®

5 6sharkclean.com sharkclean.com
ION POWER PACK BATTERY
37 The ION Power Pack Battery is the power
source for the appliance. When the ION
Power Pack Battery is connected to the
appliance, DO NOT carry the appliance
with your finger on the power button. DO
NOT charge appliance with the power on.
38 Disconnect the ION Power Pack Battery
from the appliance before making any
adjustments or troubleshooting.
39 Use only Shark®chargers
YLS0243A-T288080 or
YLS0483A-T2880802. Use of incorrect
charger may create a risk of fire when used
with ION Power Pack Battery.
40 Use appliance only with specifically
designated ION Power Pack Batteries. Use
of any other battery packs may create a
risk of injury and fire.
41 When ION Power Pack Battery is not in
use, keep it away from all metal objects,
such as paper clips, coins, keys, nails,
or screws. Shorting the battery terminals
together increases the risk of fire or burns.
42 Under abusive conditions, liquid may be
ejected from the power pack. Avoid contact
with liquid, as it may cause irritation or
burns. If contact occurs, flush with water. If
liquid contacts eyes, seek medical help.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
FOR HOUSEHOLD USE ONLY • PLEASE READ CAREFULLY BEFORE USE
WARNING
To reduce the risk of injury, fire, electric shock, and property damage
resulting from improper use of the appliance, carefully observe the following
instructions� This unit contains electrical connections and moving parts that
potentially present risk to the user�
43 DO NOT expose power pack or appliance
to fire or temperature above 266°F (130°C)
as it may cause explosion.
44 Follow all charging instructions and DO
NOT charge the power pack or appliance
outside of the temperature range specified
in the instructions (see #21). Charging
improperly or at temperatures outside of
the specified range may damage the ION
Power Pack Battery and increase the risk
of fire.
45 Appliance should only be serviced by a
qualified repair person using only identical
replacement parts. To ensure safety,
DO NOT modify or attempt to repair the
appliance or the power pack yourself,
except as indicated in the instructions for
use and care.
46 ION Power Pack Battery should not be
stored at temperatures below 37.4°F (3°C)
or above 104°F (40°C) to maintain long-
term battery life.
47 ION Power Pack Battery should not be
exposed to or submerged in any water, salt
water, or other liquids.
GETTING TO KNOW YOUR SHARK®
IONFLEX™ WITH DUOCLEAN™
WELCOME!
Congratulations on
your purchase. Use this
instruction manual to
learn about your new
vacuum’s great features.
From assembly to use
to maintenance, you will
find it all in here.
APower Switch
BBattery Release
CHandheld Vacuum
DION Power Pack Battery
EDust Cup Release
FMultiFLEX™Wand Release
GMultiFLEX Storage Carry
Handle
HMultiFLEX Wand Button
IMultiFLEX Wand
J DuoClean Floor Nozzle
KLower Wand Release
Pedal
LBrushroll Garage Release
Buttons
MHeadlights
NSoft Roller
OSoft Roller Access Tab
NOTE: Your ION Power
Pack Battery does not
come fully charged.
Prior to first use, charge
completely. During first
use, discharge fully to
condition your ION Power
Pack Battery. Failure to
do so may cause LED
indications to work
incorrectly.
Wand
Release
A B
C
F
D
E
H
I
K
O
J
L
M
N
G

7 8sharkclean.com sharkclean.com
USING YOUR ION POWER PACK BATTERY
INSTALLING YOUR ION POWER PACK BATTERY
Slide the ION Power Pack Battery into the slot on the back of
the handheld vacuum.
To remove, pinch the release tab and slide the ION Power Pack
Battery out of the handheld vacuum.
CHARGING YOUR ION POWER PACK BATTERY
Using the ION Power Pack Battery Charger
Connect the ION Power Pack Battery Charger to the port on
the side of the ION Power Pack Battery, then plug the charger
into a wall outlet. The ION Power Pack Battery can be charged
whether it is inside or outside the handheld vacuum.
Using the ION
Power Pack Battery
Charging Dock
Connect ION Power
Pack Battery Charger
to the Charging Dock.
Place power pack onto
dock, then connect
charger to wall outlet.
ASSEMBLING YOUR VACUUM
1Insert the wand into the DuoClean™floor
nozzle, pressing it in until it clicks securely
into place.
STEP 2
CLICK
STEP 1
CLICK
2Insert the handheld vacuum into the top
of the wand, pressing it in until it clicks
securely into place.
LED BATTERY POWER METER
In Use
As the ION Power Pack discharges, its 3 LED lights will
gradually turn off in sequential order. When less than 5% of
charge remains, the bottom LED light will flash, indicating a
charge is needed.
Full
Charge
Mid
Charge
Low
Charge
No
Charge
Nearly
Empty
Charging
As the ION Power Pack Battery charges, the lights will first blink
and then illuminate steadily, in sequential order. All 3 lights will
glow steadily upon receiving a full charge, and then turn off after
a short period. This preserves long-term battery life and allows
the battery to remain connected to the charger even after
reaching full charge.
Full
Charge
Low
Charge Mid
Charge
Nearly
Full
1 2
NOTE: Allow battery to cool
before charging.
NOTE: ION Power Pack
takes approximately 3.5 hours
for full charge.
NOTE: When measured at
the handvac in Extended
Runtime mode, each ION
Power Pack will provide up
to 40 minutes of runtime.
Runtimes will be lower in Max
Power mode and when using
the DuoClean nozzle, wand,
and/or accessories on carpets
and floors.
NOTE: The ION Power Pack,
like all lithium-ion products, will
naturally decrease in capacity
over time from the 100%
capacity of a new battery.

9 10sharkclean.com sharkclean.com
USING THE
MULTIFLEX™ WAND
WARNING: This
vacuum does not stand
up on its own. Using
the unit when it lacks
stability may result
in personal injury. To
place in MultiFLEX
Storage mode, press
the MultiFLEX Wand
button and gently fold
the handheld vacuum
down toward the floor
nozzle.
TIP: The carry handle
located below the
handheld vacuum can also
be used to assist in taking
the vacuum in and out of
MultiFLEX Storage mode.
NOTE: Before vacuuming
your delicate area rugs
or carpet, refer to the rug
manufacturer’s recommended
cleaning instructions.
To start vacuuming, press the Power button, then recline
the wand to start the brushrolls.
USING THE MULTIFLEX WAND
To easily access hard-to-reach areas under furniture without
having to bend down, press the MultiFLEX Wand button to
position the wand to a lower angle.
MULTIFLEX STORAGE
Press the MultiFLEX Wand Lock Release button and gently
fold the handheld vacuum forward toward the floor nozzle
until it locks in storage mode. Use the handle to carry the
vacuum to its storage location.
To take the vacuum out of storage mode, press the MultiFLEX
Wand Lock Release button while lifting up the handheld
vacuum. When straightened, the wand will lock in place.
WHAT DOES THE
BRUSHROLL INDICATOR
LIGHT MEAN?
Solid Green
The brushrolls are on and
working as they should.
Solid Red
There is a jam in the brushroll
area. Turn your vacuum off
and remove the blockage.
No Light
The brushrolls are off
because the vacuum is off,
or the nozzle is not correctly
connected to the wand or
handheld vacuum.
USING SMART RESPONSE™
TECHNOLOGY
CHOOSING A SUCTION SETTING
There are 2 suction settings:
EXTEND RUNTIME – For everyday
cleaning.
MAX POWER – Maximum power for heavy-
duty cleaning.
NOTE: The MAX POWER setting drains the ION Power
Pack Batteries faster than extend runtime setting.
NOTE: For deep carpet cleaning per ASTM F608, use
Carpet and Max Power settings.
SMART RESPONSE TECHNOLOGY
The Smart Response Technology lets you select the ideal power setting and brushroll speed for
each cleaning job.
CHOOSING A SURFACE SETTING
CARPET setting – For cleaning high pile
carpets. Both brushrolls spin faster, working
together to pick up debris below the surface
of your carpets.
FLOOR setting – For cleaning bare floors
and area rugs. The brushroll and the Soft
Roller both spin together slowly to gently clean
hard floors and delicate rugs. The Soft Roller
traps fine dust and large particles, while the
brushroll directs that debris to the suction
channel.
USAGE SURFACE SETTINGS
BUTTON
POWER BUTTON SUCTION SETTINGS
BUTTON
STORAGE

11 12sharkclean.com sharkclean.com
TIP: To conveniently
clean stairs, attach the
handheld vacuum directly
to the DuoClean™floor
nozzle.
USING YOUR VACUUM
IN ABOVE-FLOOR MODE
STEP 1 STEP 2
1 Stand the vacuum upright.
Step on the foot pedal
and pull the wand up to
disconnect it from the
DuoClean floor nozzle.
Press the MultiFLEX™
Wand button to vacuum
with the wand at a lower
angle.
2 Attach desired cleaning
accessory to the wand.
FOR LONG-REACH CLEANING:
STEP 1 STEP 2
FOR SHORT-REACH CLEANING:
1 Press the MultiFLEX™Wand Release button
on the top of the wand to disconnect it
from the handheld vacuum.
2 Attach desired cleaning accessory to the
handheld vacuum.

13 14sharkclean.com sharkclean.com
MAINTAINING YOUR VACUUM
EMPTYING THE DUST CUP
1To empty dust cup, first remove the handheld vacuum from
the wand by pressing the Wand Release button and pulling
up on the handheld vacuum.
2Position dust cup over a trash bin, then open the bottom of
the dust cup by pressing the Dust Cup Release button on
the side.
CLEANING THE FILTERS
1To clean the foam filter, remove the filter cover lid on the top of the handheld vacuum and
slide off the foam filter. Rinse foam filter with water. Tap loose dirt off filter between washes
as needed. Once completely dry, reinsert the felt filter and close the filter cover lid.
2To clean the felt filter, remove the cover on the bottom of the handheld vacuum by pressing
the release button. Remove felt filter. Rinse with water. Once foam filter is completely dry,
return it to the filter frame, then replace the filter frame and the filter cover.
FELT FILTER
FOAM FILTER FILTER FRAME
FILTER COVER LID
WARNING: To reduce
the risk of shock and
unintended operation,
turn off power and
remove the ION Power
Pack before servicing.
WARNING: Hand wash
filters only with water
to prevent damage from
cleaning chemicals.
Allow ALL filters to air-
dry completely before
replacing them in the
vacuum to prevent
liquid from being drawn
into electricparts.
IMPORTANT: Clean the
dust screen inside the dust
cup as required.
NOTE: Empty dust cup when
debris reaches the MAX fill
line.
RECOMMENDED
FILTER CLEANING
SCHEDULE:
Pre-Motor Filter Kit
(Foam & Felt)
Clean once a month.
Wand
Release

15 16sharkclean.com sharkclean.com
MAINTAINING YOUR VACUUM - CONT�
MAINTAINING THE BRUSHROLL
1To start, first remove the nozzle from the wand and/or
handvac.
2Open the brushroll garage by sliding both release buttons
away from you, toward the back of the floor nozzle, then
lifting off the garage lid. Remove any string, hair, or debris
that may be wrapped around the brushroll by running
scissors or the lower corner of the garage lid along the
guide on the brushroll.
3Close the brushroll garage by inserting the tabs on the lid
into the slots on the floor nozzle, then pressing down on the
lid, above the headlights, until both sides click into place.
4Both sides must be clicked in properly for operation.
WARNING: To reduce
the risk of shock and
unintended operation,
turn off power and
remove the ION Power
Pack before servicing.
WARNING: When
cleaning brushroll, be
sure to not cut anything
other than hair, string,
fibers, or other debris.
TIP: Ensure the brushroll
garage is completely
sealed and closed before
using.
NOTE: Heavy usage over
time may require minimal
upkeep in order to maintain
your vacuum’s appearance.
STEP 1 STEP 2
MAINTAINING THE SOFT ROLLER
1To start, first remove the nozzle from the
wand and/or handvac.
2
Open the brushroll garage by sliding both
release buttons away from you, toward the
back of the floor nozzle, then lifting off the
brushroll garage lid. Lift out the Soft Roller
by the tab on the right side. Clean off any
string, carpet fibers, or hair that may be
wrapped around the Soft Roller, and remove
debris from the roller housing.
3 Wash the Soft Roller as needed, using only
water. Air-dry completely for at least 24 hours
before returning it to the brushroll garage .
4Reinsert the Soft Roller by sliding it into
the front of the floor nozzle until it clicks
into place. Close the brushroll garage by
inserting the tabs on the garage lid into
the slots on the floor nozzle, then pressing
down on the lid, above the headlights, until
both sides click into place.
CHECKING FOR BLOCKAGES:
Handheld, Wand, and Floor Nozzle
1 Turn off vacuum and remove ION Power
Pack.
2Remove the wand from the handheld
vacuum and check all intake openings to
the dust cup.
3Remove the floor nozzle from the wand
and check the wand for blockages.
4Tilt neck of floor nozzle back to straighten
the airway to remove blockages.

17 18sharkclean.com sharkclean.com
TROUBLESHOOTING GUIDE
WARNING: To reduce the risk of shock and unintended operation, turn o
power and remove the ION Power Pack before servicing�
Vacuum is not picking up debris, no suction or light suction�
(Refer to Maintenance section for more information�)
• Check filters to see if they need cleaning. Follow instructions for rinsing and completely
air-drying the filters before reinserting in the vacuum.
• Dust cup may be full; empty dust cup.
• Check floor nozzle for blockages; clear blockages if required.
• Remove any string, carpet fibers, or hair that may be wrapped around the brushroll and Soft Roller
or trapped behind the Soft Roller.
• Check connection between handvac and wand for blockages; clear blockages if required.
Vacuum lifts area rugs�
• Check that vacuum is in EXTEND RUNTIME mode. Take care when vacuuming area rugs or rugs
with delicately sewn edges.
• Turn off the unit to disengage the brushroll and restart with the Power button.
Brushroll/Soft Roller does not spin�
• If Brushroll Indicator Light on the floor nozzle turns red, the brushroll and/or Soft Roller have
stopped spinning. First, check that both sides of the garage door have been clicked in securely.
Immediately turn off and remove ION Power Pack from handheld vacuum and remove blockage
before reconnecting and turning vacuum back on. If light turns green, the blockage has been
successfully cleared. If it remains red, please contact Customer Service at 1-800-798-7398.
• If headlights are not illuminated, there is a connection issue between the handheld vacuum, wand,
and nozzle. Try disconnecting and reattaching the pieces.
Vacuum turns o on its own�
There are several possible reasons for the vacuum turning off on its own, including blockages, ION
Power Pack issues, and overheating. If vacuum turns off on its own, perform the following steps:
1. Check LED lights on ION Power Pack to see if it needs to be recharged. If power pack does not
need charging, turn off vacuum and remove power pack.
2. Empty dust cup and clean filters (see Maintenance section).
3. Check wand, accessories, and inlet openings and remove any blockages.
4. Allow unit and ION Power Pack to cool for at least 45 minutes, until it returns to room
temperature.
5. Return power pack to vacuum and press Power button.
LED lights on ION Power Pack are flashing�
• If top 2 or bottom 2 LED lights are flashing (Fig. A, Fig. B), call Customer Service at
1-800-798-7398.
• Bottom LED light is flashing (Fig. C): ION Power Pack needs to be charged.
• Top and bottom LED lights are flashing (Fig. D): ION Power Pack temperature is not optimal, so
charging is temporarily paused. Leave power pack plugged in and charging will resume soon.
Fig. A Fig. B Fig. C Fig. D
For all other issues, please call Customer Service 1-800-798-7398.
LIGHT INDICATOR WHAT IT MEANS
FLOOR and
CARPET LEDs
alternate
illuminating
Unit temperature is high. Turn off
vacuum. While unit is cooling, look
for blockages and remove any that
are found. Filters may also need to be
cleaned.
EXTEND RUNTIME
and MAX POWER
LEDs are flashing
together
Blockage detected. Turn off unit and
remove blockage.
Headlights are
flashing
Brushroll garage is not properly
closed. Close the garage by inserting
the tabs on the garage lid into the slots
in the floor nozzle, then pressing down
on the lid, above the headlights, until
both sides click into place.
Solid Green
Solid Red
No Light
The brushrolls are on and working as
they should.
There is a jam in the brushroll area.
Turn your vacuum off and remove the
blockage.
The brushrolls are off because the
vacuum is off, or the nozzle is not
correctly connected to the wand or
handheld vacuum.

19 20sharkclean.com sharkclean.com
TWO (2) YEAR LIMITED
BATTERY WARRANTY
FIVE (5) YEAR
LIMITED WARRANTY
The 2-Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja
Operating LLC. Warranty coverage applies to the original owner and to the original battery only and is
not transferable.
SharkNinja warrants that the ION Power Pack shall be free from defects in material and workmanship for a
period of 2 years from the date of purchase when it is used under normal household conditions and maintained
according to the requirements outlined in this instruction manual, subject to the following conditions and
exclusions.
What is covered in my warranty?
1. The original ION Power Pack, deemed defective, in SharkNinja’s sole discretion, will be replaced for up
to 2 years from the original purchase date.
2. In the rare event that a replacement battery is issued, the warranty coverage for the replacement
battery ends six months following the receipt date of the replacement battery or the remainder of the
existing warranty, whichever is greater.
What is not covered in my warranty?
Our Customer Service/Product Specialists are available to provide all the warranty service options
available to you.
1. Normal wear and tear of ION Power Pack, which requires optimal temperature storage and operation
to ensure the proper functioning of your battery, is not covered by this warranty.
2. Any battery that has been tampered with or used for commercial purposes.
3. Damage caused by misuse, abuse, or negligent handling, or damage due to mishandling in transit.
4. Consequential and incidental damages.
5. Defects caused by or resulting from damages from shipping or from repairs, service or alteration to the
product or any of its parts which have been performed by a repair person not authorized by SharkNinja.
6. Products purchased, used or operated outside of North America.
Problems with your battery
If your ION Power Pack fails to operate properly while in use under normal household conditions within
the warranty period, visit sharkclean.com for product care/maintenance self-help. Our Customer Service
and product specialists are also available at 1-800-798-7398 to assist with product support and warranty
service options.
SharkNinja will cover the cost for the customer to send in the battery to us for replacement. A fee of $19.95
for return shipping costs will be charged at the time of return shipment of the replacement battery.
How to initiate a warranty claim
You can call 1-800-798-7398 to have a Customer Service specialist assist you. Please note you must call
1-800-798-7398 to initiate a warranty claim.
For Customer Service hours, visit sharkclean.com.
Replacement ION Power Packs are available for purchase at sharkclean.com/batteries.
This warranty gives you specific legal rights, and you also may have other rights that vary from state to state.
Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above
may not apply to you.
The 5-Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja
Operating LLC. Warranty coverage applies to the original owner and to the original product only and is
not transferable. ION Power Pack is not covered by 5-year warranty (See battery warranty on next page).
SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period of 5 years
from the date of purchase when it is used under normal household conditions and maintained according to the
requirements outlined in this instruction manual, subject to the following conditions and exclusions.
What is covered in my warranty?
1. The original unit and/or non-wearable components deemed defective, in SharkNinja’s sole discretion,
will be repaired or replaced for up to 5 years from the original purchase date.
2. In the rare event that a replacement unit is issued, the warranty coverage ends six months following the
receipt date of the replacement unit or the remainder of the existing warranty, whichever is greater. If
the unit is replaced, SharkNinja reserves the right to replace the unit with one of equal or greater value.
What is not covered in my warranty?
Our Customer Service/Product Specialists are available to provide all the warranty service options
available to you, including the possibility of upgrading to our VIP Warranty Service Options for select
product categories.
1. Normal wear and tear of wearable parts such as foam filters, HEPA filters, pads etc., which require
regular maintenance and/or replacement to ensure the proper functioning of your unit are not covered
by this warranty.
2. Any unit that has been tampered with or used for commercial purposes.
3. SharkNinja will cover the cost for the customer to send in the unit to us for repair or replacement. A
fee of $19.95 for return shipping costs will be charged at the time of return shipment of the repaired or
replacement unit.
4. Damage caused by misuse, abuse, or negligent handling, or damage due to mishandling in transit.
5. Consequential and incidental damages.
6. Defects caused by or resulting from damages from shipping or from repairs, service or alteration to the
product or any of its parts which have been performed by a repair person not authorized by SharkNinja.
7. Products purchased, used or operated outside of North America.
Problems with your unit/How to get service
If your appliance fails to operate properly while in use under normal household conditions within the
warranty period, visit sharkclean.com for product care/maintenance self-help. Our Customer Service and
product specialists are also available at 1-800-798-7398 to assist with product support and warranty
service options.
How to initiate a warranty claim
You can call 1-800-798-7398 to have a Customer Service specialist assist you. Please note you must call
1-800-798-7398 to initiate a warranty claim. Return and Packing Instruction information will be provided at
that time.
For Customer Service hours, visit sharkclean.com.
Replacement parts are available for purchase at sharkclean.com. For more information on which parts are
classified as wearable and non-wearable, please visit sharkclean.com/warranty.
This warranty gives you specific legal rights, and you also may have other rights that vary from state to state.
Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above
may not apply to you.

@sharkcleaning
SharkNinja Operating LLC
US: Needham, MA 02494
CAN: Ville St-Laurent, QC H4S 1A7
1-800-798-7398
sharkclean�com
Illustrations may differ from actual product. We are constantly striving to improve
our products; therefore the specifications contained herein are subject to change
withoutnotice.
SHARK is a registered trademark of SharkNinja Operating LLC.
DUOCLEAN®, IONFLEX, MULTIFLEX, and SMART RESPONSE are trademarks of
SharkNinja Operating LLC.
For SharkNinja U.S. Patent information, visit sharkninja.com/USPatents
© 2018 SharkNinja Operating LLC
UF280�IB�E�EB2
PRINTED IN CHINA