Shark HV330UK Series User manual

HV330UK_QSG_MP_180706
For questions or to register your product, contact us on
0800 862 0453 or visit us online at sharkclean.eu
Please make sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
2018 Euro-Pro Europe Ltd. Shark is registered trademarked to SharkNinja Operating LLC.
STORAGE OPTIONS
HV330UK Series
CORDED HANDSTICK
Use this Quick Start Guide
to start using your new
vacuum’s great features.
QUICK
START
GUIDE
Press the nozzle release button on the top of the tube and pull to separate it from
the handheld portion of the vacuum. There is a hook on the bottom of the handheld
portion. Hook it onto the hanger that is on the bottom portion of the tube. Wrap the
cord around the two cord hooks. The unit is now ready to be stored.
Hang on
storage hook

NOTE: For best performance,
use Setting I for all above-floor
accessories.
To detach the wand from the handheld
vacuum, press the wand release button
on the top of the wand.
To disconnect the wand from the floor
nozzle, stand the vacuum upright, press
the nozzle release button, and pull the
wand up.
Floor Nozzle Release
Wand
Release
Wand Release
OR
ABOVE-FLOOR CLEANING
VERSATILE FLOOR-TO-CEILING CLEANING
A Handheld Vacuum
B Wand
C Motorised Floor Nozzle
D Crevice Tool
E Upholstery Tool
A
C
B
A S S E M B LY
2
(Click)
1
(Click)
E
WHAT’S INSIDE:
D
For additional parts and accessories,
visit sharkclean.eu
For complete instructions, see enclosed
Owner's Guide.
Setting II
Deep cleans
carpets by removing
embedded dirt.
Setting I
Gentle on hard
floors and delicate
area rugs.
FLOOR CLEANING
Plug in the Vacuum
Place your foot gently on the floor
nozzle and tilt the handle back.
Choose Setting
Slide the power switch to appropriate
speed setting (I or II) and start cleaning.
Attach desired cleaning accessory
to wand or handheld vacuum.