Shark IQrobot User manual

Please be sure to read the enclosed Shark® Owner’s Guide prior to using your robot.
SELF-EMPTY
As your robot is learning your home, you may need to make some small adjustments to optimize your
robot’s performance.
AVOID MOVING THE ROBOT OR BASE
LIGHTING CONDITIONS
CHECK BASE FILL LEVEL
DOORWAYS AND THRESHOLDS
Clean Dock
!
WHAT TO EXPECT
While your robot is cleaning, do not pick it up and
move it, or move the charging base—this could
impact the robot’s ability to map your home.
Run your robot in well-lit conditions. If you are
running your robot at night, make sure to turn on
the lights.
During the first few weeks, your robot will empty
more often than usual. Check the fill level regularly.
Home environments vary, and the bin may fill up
quicker in some homes.
Your robot can easily climb over most common
thresholds. However, in some situations they may
present a challenge. Use BotBoundary® strips to
block o these areas.
INTERACTIVE MAP SCHEDULING
Depending on your home layout, your robot may
take several runs to build a complete map.
For a constant state of clean, set up a cleaning
schedule in the app.
© 2019 SharkNinja Operating LLC. BOTBOUNDARY and SHARK are registered trademarks of SharkNinja
Operating LLC. IQ NAV, SHARK IQ ROBOT, and SHARK IQ ROBOT SELF-EMPTY are trademarks of
SharkNinja Operating LLC.
RV1000AE_QSG_NoSM_E_MP_Mv3
QUICK START GUIDE
To stay current on our latest updates and features,
DOWNLOAD THE SHARKCLEAN APP.
Search “SharkClean” in the app store.

PLUG IN THE BASE
STEP 3
!
!
BotBoundary® strips
BotBoundary strips
Find a permanent location for the base, with its
back against a wall, in an area with a good Wi-Fi
signal. For best results, set up base on hard floor.
SET UP THE BASE
STEP 2
5 ft. 3 ft.
3 ft.
PREP THE ROBOT
STEP 1
Remove protective film from robot and base, attach
side brushes, and power robot on.
Connect the Charging Cord to the port on the back
of the base, then plug cord into an electrical outlet.
The Indicator Light will illuminate green when base
has power.
Place robot on base to charge. The base indicator
light will flash blue and the robot will beep when
charging begins.
NOTE: Robot will empty during first docking.
Clear cords and remove small objects like toys,
clothing, or drapes from floors. Open interior doors
where you want your robot to clean.
CHARGE THE ROBOT
PREP YOUR HOME SET UP FOR SUCCESS
STEP 4
STEP 5 STEP 6
Clean Dock
!
BACK
First
Charge
6h
SETUP
OPTIMIZING YOUR HOME FOR CLEANING
CONNECTING THE SHARKCLEAN APP AND ROBOT
Search SharkClean in the app store
and download to get started. Apple iOS Only
STEP 1
Create An Account
STEP 2
Activate Robot Wi-Fi
STEP 3
Select Robot
• Open the SharkClean app
and set up your account.
• Hold down Dock and Clean
buttons simultaneously until
Wi-Fi light ( ) on robot blinks.
• Exit the app and open
Wi-Fi settings.
• Select your robot (Ex. Shark_
RVXXX) from the menu.
• Exit settings and return to
the SharkClean app.
STEP 4
Connect To Home Wi-Fi
STEP 5
Success! Questions?
• Select your home Wi-Fi network
and enter your password.
NOTE: Most networks are 2.4ghz—
your app will only work on this type.
• When pairing is complete, the
Success screen will appear.
Two Easy Steps If You’re Stuck:
1. Having trouble connecting to
your robot? Call 1-888-228-5531
for robot support.
2. For additional help, visit:
sharkclean.com/support
• How-to Videos
• FAQs
• Troubleshooting
• Tips & Tricks
Smart Home Setup
To set up voice control using
Google Home or Amazon Alexa,
visit sharkclean.com/app for
instructions.
Use the BotBoundary strip included in the box to
keep your robot out of the areas you would like it
to avoid:
• Near power cords or phone chargers that might
cause tangles
• In front of high thresholds
INDICATOR