Shark MATRIX 2-in-1 ROBOT RV2400WD Series User manual

QUICK START GUIDE
2400WD Series
Robot Setup:
4Scan the QR code to download the SharkClean® app.
2 ft.
1 ft.
1 ft.
App Features
✔Mapping
✔Scheduling
✔No-Go Zones
✔Carpet Zones
✔Spot Cleaning
2Attach Side Brush
Note: Side brush design may vary.
1Set Up Dock + Landing Mat
• Remove protective film from robot and dock.
• Place dock in a spot with a strong Wi-Fi signal.
3Place Robot on Dock
• Robot will turn on when properly placed on dock.
• Blue LED light on the dock indicates robot is charging.
Side Brush
• Complete your robot setup process in the app and learn
about mopping mode.
• To get the best cleaning performance from your robot, we
recommend downloading the latest version of the SharkClean® app.
Turn Page
TM

What’s Included:
Robot Dock
Fluid Reservoir
Landing Mat
Enables mopping mode.
Sits under the robot dock.Charging dock for robot.
1. Visit: sharkclean.com/support
• Owner’s Guide • Troubleshooting
• How-To Videos • FAQs
• Tips & Tricks
2. For additional help, call
1-888-228-5531 for robot support.
Two Easy Steps If You’re Stuck: Maximize Your Robot Experience:
© 2022 SharkNinja Operating LLC. SHARK and SHARKCLEAN are registered trademarks of SharkNinja Operating LLC.
SHARK MATRIX and VACMOP are trademarks of SharkNinja Operating LLC. APPLE and the Apple logo are trademarks of Apple
Inc., registered in the U.S. and other countries. APP STORE is a service mark of Apple Inc., registered in the U.S. and other
countries. GOOGLE, GOOGLE ASSISTANT, GOOGLE PLAY, the Google Play logo, and Android are trademarks of GOOGLE LLC.
Mopping Pad
Reusable mopping pad for mopping mode.
Tips and tricks for getting the most out of your robot.
• To manually turn ON /OFF your robot, hold down
the DOCK button for 5-7 seconds.
• Clear the area of cords and wires before each clean.
• Use mopping mode for daily maintenance
and stuck-on messes.
• Only use Shark® VACMOPTM cleaning solution or
water when mopping.
• Always place your robot on a level surface when
performing maintenance.
• Clean brushroll and filter regularly.