Shark Powered Lift-Away NV751 User manual

AMotorized Floor Nozzle
BWand
CHandle
DPet Multi-Tool
ASSEMB LY
WHAT’S INSIDE MAINTENANCE
NV751_QSG_170329
QUICK START GUIDE
POWERED
LIF T-AWAY®
Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
Insert wand into
motorized floor nozzle.
Press top dust-
cup release latch
to access dust
screen and remove
built-up debris
asrequired.
Use a coin to
open the 3
locks on the
bottom of the
floornozzle.
Remove any
string, carpet
fibers, or hair
that may be
wrapped around
the brushroll.
A portion of the base
is hinged for better
access to the brushroll
and exposure to the
airway. To reassemble,
replace base by lining
it up along the front
nozzle. Rotate closed
and lock the 3 locks.
Pre-Motor (foam and felt):
With the dust cup removed, take out and rinse the foam and
felt filters with water.
Post-Motor (HEPA):
To access the HEPA filter, reach under the grill and pull the
Filter Access latch to remove the grill. Remove and rinse the
HEPA filter.
Place pod onto wand and
slide down to connect.
Connect hose to back of
pod, pressing until it clicks
into place. Store accessories
on the posts on the pod.
Insert handle into wand.
1
(Click)
2
(Click)
3
(Click) 4
(Click)
Empty dust cup after each use
TIP:
Wash filters every
3 months to keep
the suction strong.
Rinse filters and allow
to air-dry completely.
Tap loose dirt from
foam filters as needed
between washes.
Easy brushroll maintenance
Cleaning Filters
Pull up on
dust cup
release latch
and lift dust
cup o pod.
Hold dust cup over a
trash bin and press the
empty-release latch
on the bottom.
HEPA
Felt filter
Foam filter
Filter
Filter Access
EHard Floor Hero™ Attachment
FCrevice Tool
GPet Power Brush
B
C
A
F G
ED

VERSATILE FLOOR-TO-CEILING CLEANING
For questions or to register your product, contact us at 800-798-7398 or visit us online at sharkclean.com
@sharkcleaning
2Choose Setting
Slide the power switch to the appropriate
floor setting and start cleaning.
1Plug In Vacuum
To start cleaning, place
your foot gently on the
floor nozzle and tilt the
handle back.
FLOOR CLEANING POWERED LIFT-AWAY®MODE
LIFT-AWAY®ABOVE-FLOOR CLEANING
NOTE:
For deep cleaning per ASTM F 608 (embedded dirt in carpets)
please set to Carpet/Low Pile and Suction Control to MAX.
Carpet and
Low-Pile Cleaning
Set floor selector
to Carpet/Low Pile.
Thick Carpet & Area
Rug Cleaning
Set floor selector
to Carpet.
Hard-Floor Cleaning
Set floor selector to
Hard Floor.
Press Lift-Away button to lift pod o floor nozzle. You
are now ready to clean those hard-to-reach places.
Attach any of the
specialized cleaning
accessories to the
handle or wand.
L
i
f
t
A
w
a
y
®
To clean above-floor
areas with the handle,
detach it from the
wand by pressing the
Handle button.
To clean with a
longer reach,
detach the
wand from the
floor nozzle by
pressing the
Wand Release
button.
Handle
Wand
Release
LIFT-AWAY, POWERED LIFT-AWAY, and SHARK are registered
trademarks of SharkNinja Operating LLC.