WHAT’S INSIDE: POWER SETTINGS
LI-ION BATTERY
ASSEM B LY
For complete maintenance instructions, see the enclosed Owner's Guide.
For additional parts and accessories, visit sharkaccessories.com.
For additional batteries and charging accessories, visit sharkclean.com/batteries.
A
B
C
2
(Click)
1
(Click)
OFF BARE FLOOR
SETTING CARPET SETTING BOOST MODE
Slide switch to the
top to turn o power.
To begin vacuuming
in Standard Mode,
slide switch to the
appropriate setting.
Bare Floor/Area Rugs
The brushroll spins slowly
to clean bare floors and
small arearugs.
Carpet
The brushroll spins
faster to pick up debris
below the surface
ofyour carpets.
For an added boost in
power, pull the Trigger
on the handheld vacuum.
Release it to return to
standard power.
NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please select the Carpet setting and pull the
trigger to go into Boost mode.
NOTE: Select Carpet setting for stuck-on dirt and debris.
In Use
Full
Charge
Mid
Charge
Low
Charge
Nearly
Empty
No
Charge
Charging
Low
Charge
Mid
Charge
Nearly
Full
Full
Charge
NOTE: Full charge takes approximately 3 hours.
CHARGING
Easily Insert or Remove
the Li-Ion Battery
To insert, slide the Li-Ion
Battery into the slot in
the back of the handheld
vacuum. To remove, press
and hold the Battery
Release Button then slide
out the Power Pack.
©2020 SharkNinja Operating LLC.
IN THE
VACUUM
OUT OF
THE VACUUM
BATTERY RELEASE
BUTTON
BATTERY
INDICATOR
LIGHTS
NOTE: The battery comes
partially charged. Charge fully
before first use.
Battery Run Time
MODE MINUTES
Hand Vac 40
Bare Floor/
Standard Mode 25
Carpet Mode 20
Boost Mode
(Hand Vac) 10
AHandheld Vacuum
BDirt Engage™ Floor Nozzle
CMultiFLEX™ Wand
DUpholstery Tool
E8" Crevice Tool
FSelf-Cleaning Pet Power Brush
GCharger
HLi-Ion Battery (Pre-Installed)
IHEPA Post Motor Filter (Pre-Installed)
EF
FG
D
H
