Shark Rocket User manual

Empty
ASSEMB LY
AHandheld Vacuum
BMotorized Floor Nozzle
CWand
DPet Multi-Tool
E5.5" Crevice Tool
FUnder-Appliance Wand
WHAT’S INSIDE STORAGE
MAINTENANCE
HV301_QSG_REV_180531
2
(Click)
1
(Click)
Onboard Hook
For compact, convenient
storage, hang the handheld
vacuum on the hook on the
bottom of the wand, and
wrap the power cord around
the cord hooks. The unit
stores easily in a closet or
along a wall.
Handheld
Vacuum Catch
Handheld
Vacuum
Storage
Hook
Empty the dust cup every time
debris reaches the MAX fill line.
Brushroll Maintenance
To access the brushroll, open the three locks on the bottom
of the floor nozzle and lift o the cover. Remove any string,
carpet fibers, or hair that may be wrapped around the
brushroll. Loosen debris by cutting across the groove on
the brushroll with a pair of scissors.
F
QUICK START GUIDE
ULTRA-LIGHT
VACUUM
B
D
Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
C
E
A
WARNING:
Hand wash filters only
with water to prevent
damage from cleaning
chemicals.
Allow ALL filters to air-
dry completely before
replacing them in the
vacuum to prevent
liquid from being drawn
into electric parts.

VERSATILE FLOOR-TO-CEILING CLEANING
2Choose Setting
The Rocket®Ultra-Light Upright has a 2-speed power
slider switch on the handle. Slide the power switch
to the appropriate floor setting and start cleaning.
1Plug In Vacuum
Then place your foot
gently on the floor nozzle
and tilt the handle back.
FLOOR CLEANING ABOVE-FLOOR CLEANING
NOTE:
For deep cleaning per ASTM F 608
(embedded dirt in carpet) please use
Setting II, carpet mode.
Press the Wand Release
button on the top of the
wand to disconnect it from
the handheld vacuum.
1While holding the vacuum
upright, push the Nozzle
Release button and pull the
wand up to disconnect it
from the floor nozzle.
2Attach desired cleaning accessory.
NOTE: Use Setting I
for all above-floor
accessories.
OR
Floor Nozzle
Release
Wand Release
For questions or to register your product, visit us online at sharkclean.com
Setting II
Deep-cleans carpets by removing
embedded dirt.
The brushroll spins faster to pick
up debris below the surface of
your carpets.
Setting I
Gentle on bare floors and
small area rugs.
The brushroll spins slowly to clean
bare floors and small arearugs.