Sharp 51GT-25H User manual

Installation
1,5 V.
(AA . UM-3 . R6)
Quick
Start
Guide
Quick Start Guide
51GT-25H
1 2
3
Insert two (AA or UM-3, 1,5 V) batteries
into the remote control.
Position the positive and negative ends of
the batteries as indicated.
Quick Start Guide
PRINTED IN SPAIN
TINS-6899BMN0
8/00
Channel Setting
Press the CHANNEL
button to select
«TUNING» and
press the MENU
button.
3
PICTURE
TIMER
LOCK
TUNING
This tuning process may take
several minutes to perform.
The channels may not be tuned
in your preferred order and may
include some unwanted low
power signals. Please see page
7 of the operation manual on
how to manually tune your TV to
your preferred channel order.
Press the VOLUME
button to start Auto
Channel Preset
(Auto Tune)
4
The screen shows whatever is on
Programme Position 1 when Auto
Channel Preset is finished.
56
If problems persist contact the SHARP (office hours) Helpline on tel: [phone]
and/or WEB-SITE: www.sharp.co.uk/support
Web-site: www.sharp.co.uk/support
Help Line (office hours only): 0990-274277

Quick Start Guide
Quick Start Guide
PICTURE
TIMER
LOCK
TUNING
Press the MENU
button on the remote
control to call the
MENU screen.
AC 220~240V 50Hz
Installation
412
5
Connect the Aerial Lead to the TV
set. Plug in your TV into the mains supply. Press the main POWER (¨)
button. The red power
indicator will light.
Press the STANDBY/ON
button (¾). A picture
appears on the screen.
Typical connections
Typical connection (VCR and TV) through the RF terminal.
Mains Socket Outlet
AC 220~240 V, 50 Hz
SCART Lead
(not supplied)
Aerial Lead
(not supplied)
Aerial Lead
(not supplied)
Aerial
(not supplied)
Aerial in
RF out
Turn your TV on
If you do not intend to use your TV
with a VCR then please proceed
to stage 2.
If the TV is being used with a VCR,
turn on the VCR and play back a
pre-recorded tape.
VCR
1
Channel Setting
The AUTO TUNING function will tune all available TV stations into your
TV.
2
Web-site: www.sharp.co.uk/support Help Line (office hours only): 0990-274277 Web-site: www.sharp.co.uk/support Help Line (office hours only): 0990-274277
Mains Socket Outlet
AC 220~240 V, 50 Hz