Sharp IB-JX9KE-N User manual

Plasmacluster Hair Spa
Hair Dryer
OPERATION MANUAL
MODEL
IB-JX9KE-N
Do not use the product for commercial
purposes.
"Plasmacluster" and "Device of a
cluster of grapes" are trademarks
of Sharp Corporation.
*1 The digital reference standards indicated in this
technology mark mean: when a humidifying air
purifier with a high concentration Plasmacluster Ion
Generation Unit is placed next to the wall and runs
in the "middle" mode, the measured amount of the
ions blow out in 1 cm3air near (1.2 meter away)
from the center of the room within an applicable
area.
This product carries the unit with this function.
* "-B" in the machine mode indicated on the nameplate
or outer packing only means that the exterior color of
the product is black.
Thank you for purchasing this SHARP
HAIR DRYER.
Please read this manual carefully before
using the hair dryer.
After reading, keep the manual in a
convenient location for future reference.
*1
ENGLISH
IB-JX9KE-N.indd 1 28/9/21 4:52 PM

IB-JX9KE-N.indd 2 28/9/21 4:52 PM

E-1
ENGLISH
CONTENTS Page
EFFECTS OF PLASMACLUSTER
IMPORTANT SAFETY INSTRUCTIONS
PARTS NAME
E-2
E-4
E-8
E-11
E-14
E-16
E-18
HOW TO OPERATE
SCALP MASSAGER
CARE AND MAINTENANCE
TROUBLESHOOTING
SPECIFICATIONS E-20
INTRODUCTION
HOW TO USE
HELP
IB-JX9KE-N.indd 1 28/9/21 4:52 PM

E-2
EFFECTS OF PLASMACLUSTER
What is "Plasmacluster" technology?
Plasmacluster ions wrapped
up in the water molecules
Scalp
Ƞ
Plasmacluster is SHARP's unique technology.
Plasmacluster Generating Unit generates and emits
the same positive and negative ions that occur in
nature by applying high voltage and a larger number
of electrical discharges. Since the positive and
negative ions generated are surrounded by water
molecules, they can survive for extended periods.
Hair Moisturization Ƞ
The Plasmacluster Ion are surrounded by
water molecules to form protective layer of
water molecules on the surface of the hair,
deeply infiltrate and moisturize your hair.
Inhibition of Static Electricity Ƞ
The positive and negative Ions can suppress the
generation of static electricity and reduce the friction
of hair, keeping your hair in a healthy and strong
condition.
ȠAll the test results are provided by SHARP.
The effects may vary with the seasons, surrounding environment (temperature, humidity, wind flow, etc.),
time of use and personal status.
炔
炔
Plasmacluster
High Concentration 7000
* 1
IB-JX9KE-N.indd 2 28/9/21 4:52 PM

E-3
ENGLISH
EFFECTS OF PLASMACLUSTER
ȠFor the massage methods, please refer to Page 15 for details.
Ƞ
Ƞ
Ƞ
The Plasmacluster ions can moisturize your scalp
when you massage it with the scalp massager.
炔You can take care your hair with a soft warm wind by
turning on SCALP mode or with the most suitable COLD
mode during the hot summer or after a bath.
(Only these two modes can be selected if the scalp
massager is attached.)
炔When you massage the scalp with
the scalp massager, slide the top of
the attachment slowly over the scalp
and keep an appropriate pressure.
It would be better to massage once a
day (for no more than five minutes).
(An overlong massage each day
could lead to scalp injury.)
From today on, let's massage your scalp by
using the scalp massager.
IB-JX9KE-N.indd 3 28/9/21 4:52 PM

E-4
IMPORTANT SAFETY INSTRUCTIONS
To prevent injuries or damage to property, it's imperative to observe the following precautions.
Disassembly
prohibition
Use prohibition
in the water hole
WARNING
CAUTION
Power supply plug and power cord
Ŷ
The consequences of improper use are classified as follows.
Ŷ
The rules that should be complied with are
indicated with the following "signs" (icons).
Indicates the prohibited item.
Indicates to-do.
Indicates the content that may
cause death or heavy injury.
WARNING
To prevent an accident and an injury by an
electric shock and a short circuit, the ignition
Indicates the content that may
cause light injury or loss of property.
ƔWill not be modified. Only qualified personnel should perform
disassembly and repair.
(Doing so could lead to fire, shock, or injury.)
ƔDo not dip the product in water or pour water on it.
ƔDo not use this appliance near bathtubs, showers, basins or other
vessels containing water.
(Doing so could lead to shock, short, fire, or failure.)
ƔDo not handle roughly.
ƔDo not damage, deform, cut, get it close to high temperature, bend
excessively, twist, place heavy objects on it, place between handle
and body, or use while wound around unit.
(Otherwise it could lead to a short-circuit)
ƔDo not wind the cord around the body for stowing.
ƔDo not allow the cord to remain twisted while storing.
(Doing so could lead to a broken cord, shock, or short.)
ƔDo not use if damaged, deformed, twisted, or has become hot.
ƔDo not use if the outlet insert area is loose.
(Doing so could lead to shock, short, or spark.)
ƔDo not connect or disconnect the
plug with wet hands.
(Doing so could lead to shock, or short.)
Ɣ
炔
炔
炔
炔
Ɣ
炔
炔
炔
Ɣ
Ɣ
炔
炔
炔
炔
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Please comply with this strictly
IB-JX9KE-N.indd 4 28/9/21 4:52 PM

E-5
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
Power supply plug and power cord
Use of the scalp massager
the number means the page that displays the main description.
Page
Ŷ Ŷ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Persons who should not use product and areas it should not be used for.
炔Persons that are pregnant (may cause skin troubles as hormone
balance is unstable)
炔Persons with head injury, rash, excessive burns, or other skin
abnormality and the persons extremely exhausted
炔
Persons who are unwell; persons who are drunk; persons extremely
exhausted
炔Part operated on around the head
ƔDo not use the product in the following ways.
炔Do not use for other than scalp massage
炔Do not point continuously in one direction
炔Do not push heavily against the skin of the head or move around
too quickly
ƔDo not use for more than a specified amount of time.
(Otherwise it could lead to skin trouble on the head or body.)
Ɣ
The following persons should consult with a doctor prior to use of the appliance.
炔 Persons with atopic dermatitis or skin disease on the scalp such as eczema
炔 Persons with sensitive skin; persons with numbness or sensory abnormality
炔Persons with predisposition towards allergies; persons with
bleeding disorders such as hemorrhagic or hemophilia disease
炔Persons who are currently taking medicine
Ɣ
If there is pain on the scalp or body or some other type of abnormality,
stop use immediately and consult with a medical specialist.
(Otherwise it could lead to skin trouble on the head or body.)
WARNING
To prevent an accident and an injury by an
electric shock and a short circuit, the ignition
ƔInsert the plug fully and completely.
(Otherwise it could lead to fire, shock, or burns.)
ƔFor local use with outlet providing 13A and AC 230V
with nothing else using the outlet.
ƔDo not use with an extension cord or together with other devices.
(Doing so could lead to excessive heat, spark, or shock.)
ƔRemove dust from the power supply plug periodically.
(Otherwise it could lead to fire.)
ƔAfter use and while cleaning, set the power supply switch to OFF
and remove the power supply plug from the outlet.
(Not doing so could lead to fire, spark, burns, shock, or injury.)
ƔPull on the power supply plug at the end rather than the cord to pull
out the power supply plug.
(Otherwise it could lead to wire breaking and fire or shock.)
IB-JX9KE-N.indd 5 28/9/21 4:52 PM

E-6
Use and storage
WARNING
To prevent an accident and an injury by an
electric shock and a short circuit, the ignition
ƔThis appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
ƔChildren should be supervised to ensure that they do not play with
the appliance.
ƔDo not use on an infant.
ƔDo not store within reach of a baby.
ƔDo not use within reach of a baby.
ƔDo not allow a child to use appliance by themselves.
(Otherwise it could lead to shock, burns, or injury.)
Ɣ
Do not use in close proximity to flammable materials (gasoline, benzene,
thinner, spray, gas etc.).
(Otherwise it could lead to explosion or fire.)
Ɣ
Do not spray with hairspray or other combustible hair products while in use.
(Otherwise it could lead to fire, shock, or burns.)
Ɣ
Wipe away any hair products that have gotten on the body or accessories.
(Otherwise it could lead to failure, discoloration, or cracking.)
ƔDo not look into the air outlet while in use.
(Dust or other foreign material could be discharged with air that
could cause injury or burns.)
ƔDo not use with the back end placed on a desk or on the floor.
ƔDo not block up the air inlet and the air outlet.
Ɣ
Do not place on materials that burn easily or that are not heat resistant.
ƔDo not leave the fan switch on and then leave the area.
(Otherwise it could lead to fire, or burns.)
ƔDo not use with wet hands.
(Doing so could lead to shock, or short.)
ƔDo not insert foreign objects such as hair pins
into the air inlet or air outlet.
(Doing so could lead to fire, shock, or abnormal
operation.)
Ɣ
Ɣ
ƔWith the following abnormalities or failures, discontinue use
immediately, pull out the power supply plug, and request inspection or
repair of the sales location.
炔If the inside gets completely red or it generates smoke
炔Deformation of the root area of the power supply plug or cord
炔The body becomes abnormally hot or a part becomes deformed
炔The body makes a sound of a foreign object being inside
炔Some other type of abnormality or failure
(Otherwise it could lead to fire, shock, or burns.)
ƔIf sparks are visible in the warm air from the air outlet during use
discontinue use and remove any dust on the air outlet or air inlet.
(Otherwise it could lead to fire, or burns.)
Ƞ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
炔
炔
炔
Ɣ
Ɣ
炔
炔
Ɣ
Ɣ
IMPORTANT SAFETY INSTRUCTIONS
Please comply with this strictly
IB-JX9KE-N.indd 6 28/9/21 4:52 PM

E-7
ENGLISH
Usage
Do not touch
CAUTION
Separate
10 cm
or more
Separate
3 cm
or more
Do not place fingers in these areas
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
ƔDuring use and for a period after use, the air outlet and any nozzle
will be hot so do not touch.
ƔPerform any mounting, removing, or cleaning of the scalp massager,
nozzle after the appliance has fully cooled.
(Otherwise it could lead to burns.)
Ɣ
炔
炔
炔
炔
炔
Ɣ
CAUTION
To prevent an accident and an injury by an
electric shock the fire
ȠHair care products (anti-bifurcation solution, mousse, hair conditioner, etc.),
cosmetics, antiperspirant, antistatic agents, waterproof spray, polishing
agents, glass cleaning agents, chemical rag, wax, etc.
ƔDo not drop or cause undue impact.
(Doing so could lead to shock or fire.)
ƔDo not use for other than drying or styling human hair.
ƔDo not use on pets, shoes, hairpiece, or wig.
(Otherwise it could lead to fire, burns, or failure.)
ƔDo not use for commercial applications.
ƔDo not use any areas with an unspecified large
number of people.
(Doing so could lead to failure due to continuous
overloading.)
ƔThe following persons should not use a scalp massager.
炔Women during menstruation (May cause skin troubles as hormone
balance is unstable.)
炔Persons with hair transplant
炔Persons with a partial hair piece or extension etc.
ƔIf there is any cosmetic or other product containing silicone near the
body, the silicone could adhere to the inner body and prevent the
generation of Plasmacluster ions.
Please clean the device frequently.
E-16
Page
ƔMake sure hair is not drawn into the air inlet while in use.
炔Keep hair at least 10 cm away from the air inlet
炔Do not use with the air inlet cover
damaged
(Doing so could lead to hair being drawn
into the appliance and cut, burns, or failure.)
ƔKeep hair at least 3 cm away from the air
outlet. (Could lead to hair catching on fire.)
ƔWhen folding in or extending the handle, do
not place fingers on the parts indicated with
a in the illustration to the right.
(Doing so could lead to injury.)
IMPORTANT SAFETY INSTRUCTIONS
IB-JX9KE-N.indd 7 28/9/21 4:52 PM

E-8
MAIN UNIT
Plug
Cord
Handle
Hook
Display
Cord band
Airflow high
Airflow medium
Airflow low
Off
Airflow switch
BEAUTY button
MODE button
COLD button
Change Temperature buttons
PARTS NAME
Air inlet
Plasmacluster
generating unit
(internal)
E-11澸E-13
Page
E-11澸E-14
Page
Air outlet
Make sure the LED (blue)
is ON when using the
scalp massager
IB-JX9KE-N.indd 8 28/9/21 4:52 PM

E-9
ENGLISH
澸
澸
Warm air switched using the MODE button
COLD mode
DISPLAY
Cold air mode
ON (blue)
Cold air mode
OFF
BEAUTY mode
Beauty mode ON (white)
Cold air Mode
Soft Hot
WARM - COLD
Repeat
( Green ) ( Orange ) ( Red )
(Push on the MODE button or
COLD button to switch to a
different mode)
(Returns to previous
mode)
Soft
Generates a gentle air flow
at approximately 50°C
Warm
Generates a warm air flow
(Approximately 75°C while
in Turbo)
Hot
Generates a high
temperature air flow
(Approximately 95°C while
in Turbo)
BEAUTY
Turn on BEAUTY
MODE with the
BEAUTY button.
BEAUTY MODE
BEAUTY MODE 2
BEAUTY MODE 1
LED Combination of hot air and cold air Method of
operation
(White)
Lighting
Blinking
Winter
HOT
SCALP
HOT - COLD
Spring /
Autumn Summer
WARM
COLD
HOT
SCALP
Press the
BEAUTY button
1 2
IB-JX9KE-N.indd 9 28/9/21 4:52 PM

E-10
PARTS NAME
ACCESSORIES
How to attach How to remove
Insert the tenon at the bottom of the scalp massager and then push to lock it.
ƔScalp massager
ƔNozzle
Push onto
the body
E-3,E-14,E-15
Page
Button
Push
HOW TO OPERATE
Click
Rotate in a
longitudinal
direction
Remove while
pushing the
button
How to attach How to remove
When the nozzle is attached, the air flow is concentrated and therefore easier to
aim to the desired location.
Ɣ
Ɣ
Ɣ
Ɣ
ƔSpeed Nozzle
* Be careful not to hit your head when using.
How to attach
After checking the top and bottom with the
engraved "シタĻRQWKHVLGHRIWKHVSHHG
nozzle, insert the protrusion at the bottom
of the speed nozzle and the bottom of
the main body outlet together.
How to remove
Hold the root and remove it
diagonally downward.
ƔUnit cleaning brush
(Bundled with
the instruction
manual in a plastic bag)
E-16
Page
Speed
nozzle
Protrusion
Insert firmly until
you hear a sound
Bottom of
the outlet
IB-JX9KE-N.indd 10 28/9/21 4:52 PM

E-11
ENGLISH
Ɣ
Ɣ
TURN ON AND OFF
HOW TO OPERATE
Insert the power supply plug
Apply airflow to hair
Turn "OFF" the airflow switch and
pull out the power supply plug
1
2
CAUTION
3
4
Select airflow
E-8
Page
Select temperature
Finished
E-9
Page
ƔSeparate 10 cm or more from air inlet.
(Otherwise may lead to drawing hair into the hair dryer.)
ƔSeparate 3 cm or more from air outlet.
(Could lead to hair catching on fire.)
ƔDuring and after use, do not touch the air outlet and
nozzle because they are hot.
(Otherwise it could lead to burns).
ƔDo not store the cord in the body when storing.
(Otherwise it could lead to shock or short-circuit).
Please use a strapping tape.
Ɣ シタĻRQWKHVLGHRIWKHVSHHG
Ɣ
IB-JX9KE-N.indd 11 28/9/21 4:52 PM

E-12
HOT
Soft Dry Mode
Warm Dry Mode
Quick Dry Mode
BEAUTY
SCALP
WARM
HOW TO OPERATE
RECOMMENDED MODES
Ɣ
Wipe your hair gently with a dry towel and
then blow dry it with hot wind.
It is suitable for the use in the hot summer and for
users who dislike hot wind.
The 75°C warm wind (at TURBO) can gently blow dry
your hair.
The 50°C soft wind can gently blow dry your scalp.
(Recommended when the hair is semi-dry.)
Repeatedly switching between the WARM and COLD
modes can protect your stratum corneum.
You can get a better effect by blowing from the top of the
head to the hair tips.
Ɣ
Ɣ
Ɣ
BEAUTY MODE 2 : Normal
BEAUTY MODE 1 : Seasonal
Beauty Mode
IB-JX9KE-N.indd 12 28/9/21 4:52 PM

E-13
ENGLISH
CAUTION
Fluffy Hair
Smooth Hair
Curly Hair
ƔRecommended Blowing Rate (SET)
Final Mode
How to Operate
E-9
Page
Wet your hair with water or hair care lotion
and then blow on it with hot wind.
You can get a better effect by attaching
the nozzle.
It is easier to get hair curly if you
use hot wind and then change to
cold wind.
Roll up the hair root and blow on it
with the hot wind.
After blowing with hot wind, change to cold wind to
keep the hair moisturized and smoother.
E-17
Page
Ɣ
Do not expose the body to any hair care products.
Ɣ
Do not touch your body if any hair care products have gotten on your hands.
Ɣ
If any hair care products have gotten on the body, please wipe away with a
piece of soft cloth.
(Otherwise it could lead to discoloration or cracking).
IB-JX9KE-N.indd 13 28/9/21 4:52 PM

E-14
How to massage
SCALP MASSAGER
1
2
3
4
E-10
Page
Click
Attach the scalp massager. It would be better to massage once a day (for no more than five minutes).
ƔDo not use on other than the scalp.
ƔUse on dry hair.
ƔUse only after removing hair tangles with a brush.
Make sure the airflow switch is "OFF"
before mounting the scalp massager.
Change the airflow switch to "SET"
ƔThe temperature is changed to "SCALP"
If the unit is hot, change temperature to
"COLD".
When the scalp massager is attached,
only "SCALP" or "COLD" can be
selected.
This massages the scalp
ƔBe careful not to inadvertently press a
button when changing grip on the
handle while performing a massage.
Set the airflow switch to "OFF"
Remove the scalp massager after the
body and the scalp massager have
cooled
Take out
the power
supply plug
Finished
Ƞ
IB-JX9KE-N.indd 14 28/9/21 4:52 PM

E-15
ENGLISH
Slide up from the hairline on the back of the
head for three to five seconds. ( ) If this
step is difficult for you, you can slide from the
top to the hairline on the back. ( )
How to massage
From the forehead to the back of the head
From the sides to the top of the head
From the back to the top of the head
Attach the scalp massager. It would be better to massage once a day (for no more than five minutes).
Ɣ
Ɣ
Ɣ
Ɣmperature is changed to "SCALP"
Ɣ
Do not point continuously in one direction. Please slide the scalp massager
while massaging.
Do not push heavily against the skin. Please keep a comfortable pressure.
ȠPlease note that overlong use of heavy massage may cause scalp pain.
During sliding from to , please take the desired point as the
center and change the massage area gradually.
Touch the hairline on the forehead with the
scalp massager, and then slide it from the
temples to the top of the head for three to five
seconds. ( )
Slide the scalp massager from the hairline
from the side to the top of the head in the
same method for three to five seconds. ( )
Slide it in the same method from the left side
to the right side.
IB-JX9KE-N.indd 15 28/9/21 4:52 PM

E-16
Dust should be removed with a brush, tissue.
WARNING
PLASMACLUSTER ION GENERATION UNIT (ELECTRODE PART)
Cleaning frequency: More than once every two months
Cleaning frequency: More than once a month
Take out plug
CAUTION
The unit can be used repeatedly after cleaning.
Plasmacluster
Ion Generation
Unit (interior)
Non-replaceable
Air outlet
1
2
AIR OUTLET & AIR INLET
Air inlet
Air outlet
Unit cleaning
brush
Cleaning hole
Electrode part
(needle)
E-10
Page
If dust is hard to remove, please use a dust wiper.
If dust stick on the hair dryer, the airflow may become weak.
Do not insert objects such as hair pins into the air outlet
or air inlet.
(Otherwise it could lead to fire, shock, or abnormal operations).
Insert the unit cleaning brush into the cleaning hole at the air outlet, and remove
dust from the electrode part (Place 2) by cleaning around three times.
ƔThe Plasmacluster Ion Generation Unit is non-removable.
ƔDo not clean the unit with tools (like cotton swabs) other than the
cleaning brush provided. (Otherwise it could lead to failure).
CARE AND MAINTENANCE
IB-JX9KE-N.indd 16 28/9/21 4:52 PM

E-17
ENGLISH
BODY & ACCESSORIES
Nozzle
Scalp massager
Scalp massager
Body
Thinner
Gasoline
Alcohol
Oven cleaner
Polishing agents
Bleaching agents
Cleaning frequency: When dust is detected
(Otherwise it could lead to fire, burns, shock, or injury)
WARNING
Set the power supply switch to OFF, remove the power
supply plug from the outlet, and clean the appliance
after it has cooled.
Ɣ
Ɣ
Wipe the appearance with a soft cloth
Hair care products remaining on the body or
accessories for a long time may lead to
discoloration or cracking.
If the dust is hard to remove, please
wet the cleaning cloth with water or a
cleaning agents for the kitchen
(neutral), and then wipe the dust
away with the cloth.
Finally, wipe thoroughly again to
remove the residues of the cleaning
agents.
If the scalp massager is seriously covered with dust, you can wash it
with water.
After washing, do not use it until dry.
Otherwise it could lead to failure.
Do not dry it with the hair dryer.
Doing so could lead to deformation.
Do not use the following products to clean the body and accessories.
(The liquid infiltrating through the discolored area, crack and interior (precision parts) may lead to failure.)
Cleaning agents
containing ingredients
from citrus
(like limonene)
Synthetic
detergent for
house or furniture
(alkaline)
Cleaning spray
Metal brush
IB-JX9KE-N.indd 17 28/9/21 4:52 PM

E-18
E-16
E-16
E-16
-
-
-
E-12
E-14
E-9
TROUBLESHOOTING
Problem Description
Reference
E-8
-
Please ask the following questions before commissioning repairs or making consultations
ƔDid you switch to the COLD, SCALP or WARM mode?
⇒Switch to the HOT mode.
ƔDid you attach the scalp massager?
⇒If you attached the scalp massager, you cannot turn
on modes other than SCALP and COLD.
ƔDid you switch to BEAUTY mode?
⇒In BEAUTY mode, the sound volume varies because
of repeated switching between WARM and COLD
modes. This is not an abnormality.
The temperature varies
from time to time
The sound volume varies
from time to time
ƔDuring the generation of the Plasmacluster ions, ozone are
generated, which gives off a kind of smell from the air
outlet. The ozone is of the same concentration as natural
ozone, so it will not affect health.
I am worried about the
smell of the wind coming
from the air outlet
Ɣ
Ɣ
Ɣ
ƔThe Plasmacluster ions are generated all the time when
the unit operates.
It can be repeatedly used if you clean it around once every
two months. So it is unnecessary to replace the unit.
About the Plasmacluster
ions
ƔThe LED (blue) is on only when the scalp massager is
attached. It is not an abnormality.
The LED (blue) at the air
outlet of the body is off
ƔThe light in the room where you use the fan may flicker due
to the use of the fan. This situation is caused by the control
of the warm wind, and is not an abnormality.
If you mind this, please change outlets.
The light flickers
ƔEffects may vary depending on hair texture.
Effects may not be evident if: your hair was permed
recently; your hair was dyed; you have a wavy hair style;
your hair is very curly; your hair is thin, short or soft.
ƔDoes the electrode part of the unit have collected dust?
⇒Please clean it.
ƔIs the air outlet or air inlet obstructed by dust?
⇒Please remove the dust or other things obstructing the
ports.
I do not feel the effects of
the Plasmacluster ions
The airflow varies from
time to time
The warm wind becomes
cold from time to time
Cold wind
No warm wind
ƔIs the air outlet or air inlet obstructed by dust?
⇒Please remove the dust or other things obstructing the
ports.
Ɣ⇒Ɣ
Ɣ
If the above situation is excluded, please stop using the
appliance immediately and consult the customer service center.
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
IB-JX9KE-N.indd 18 28/9/21 4:52 PM