Sharp Aquos LC-32LE155M User manual

1 2
Printed in Malaysia
TINS-F895WJZZ 1
13P06-MA-NF
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many
years of trouble-free operation of your product, please read the Important Safety Precautions
carefully before using this product.
Important Safety Precautions
• Stand base must be attached to prevent the TV set from falling down and cause injuries.
• Cleaning — Unplug the AC cord from the AC outlet before cleaning the product. Use a soft damp cloth to clean the
product. Do not use liquid cleaners, aerosol cleaners or chemical cloth to clean it, as such materials may damage the
product.
• Water and moisture — Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub,
swimming pool and in a wet basement.
• Do not place vases or any other water-filled containers on this product.
The water may spill onto the product causing fire or electric shock.
• Stand — Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall,
resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table
recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the
manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.
• When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive force and
uneven floor surface can cause the product to fall from the cart.
• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents
and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the
product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed
for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation
is provided or the manufacturer’s instructions are followed.
• The LCD panel used in this product is made of glass. Therefore, it can break when the product is struck forcefully or with a
sharp object. If the LCD panel is broken, be careful not to be injured by broken glass.
• Heat sources — Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating
products (including amplifiers).
• To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
• To prevent fire or shock hazard, do not place the AC power cord under the TV set or other heavy items.
• Do not place heavy objects on this product or stand on it. Doing so could cause injury if the product overturns. Take
special care near children and pets.
• The LCD panel is a very high technology product with 1,049,088 (only for LC-32LE155M)/2,073,600 (only for LC-39LE155M)
pixels, giving you fine picture details.
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a fixed point of
blue, green or red.
This is within product specifications and does not constitute a fault.
• Precautions when transporting the TV
When transporting the TV, never carry it by holding or otherwise putting pressure onto the display. Be sure to always carry
the TV by two people holding it with two hands — one hand on each side of the TV.
• Do not display a still picture for a long time, as this could cause an afterimage to remain.
• Install the product on the place where the AC cord can be unplugged easily from the AC outlet.
Trademarks
• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
LC-32LE155M
LC-39LE155M
LED BACKLIGHT TV
OPERATION MANUAL
Supplied accessories
Remote control unit “AAA” size battery (g2)
Operation manual Stand unit
Stand base Screws (g5) Post
Contents
Page
Supplied accessories ..........................1
Dear SHARP customer ........................2
Important Safety Precautions .............2
Trademarks .......................................... 2
Attaching the stand ............................. 3
Antenna connection ............................ 3
Connecting external devices ............. 4
Remote control unit ............................ 5
Part names ........................................... 6
Turning the TV on/off .......................... 6
Initial auto installation ......................... 7
Selecting a preset AV mode ............... 7
Menu operation ................................... 7
Page
Programme setup ................................ 7
Picture menu ........................................ 8
Audio menu .......................................... 9
ECO menu ............................................ 9
Setup menu ........................................ 10
Option menu ...................................... 11
Colour adjustment and still image ... 12
ECO mode .......................................... 12
Timer.................................................... 12
USB Media Player .............................. 13
Appendix .............................................15
Specifications .................................... 16
LC-32LE155M_EN_F895.indd 1LC-32LE155M_EN_F895.indd 1 6/24/2013 3:29:11 PM6/24/2013 3:29:11 PM

Connecting external devices
You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD
player, Digital TV STB (Set Top Box) and PC. To view external source images, select the input source from
INPUT on the remote control unit or INPUT on the TV.
CAUTION
• To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, Digital
TV STB (Set Top Box), PC or other external equipment.
• Refer to the relevant operation manual (VCR, DVD player, etc.) carefully before making connections.
Connecting a VCR, game console or camcorder
A VCR, game console, camcorder and some other audiovisual equipment can be conveniently connected
using the INPUT 2 or INPUT 3 terminals.
When using component cable
(commercially available)
When using composite cable
(commercially available)
Y
PB
(CB)
PR
(CR)
AUDIO
L
R
VCR/Game
console/Camcorder
AUDIO
L
R
AUDIO
L
R
VCR/Game
console/Camcorder
or
Connecting a DVD player/Digital TV STB (Set Top Box)
You can use the INPUT 1 (HDMI) or INPUT 2 terminals when connecting to a DVD player/Digital TV STB (Set
Top Box) and other audiovisual equipment.
When using HDMI-certified cable
(commercially available)
When using component cable
(commercially available)
DVD player/
Digital TV STB
(Set Top Box)
Y
PB
(CB)
PR
(CR)
AUDIO
L
R
DVD player/Digital TV
STB (Set Top Box)
Connecting a PC Connecting a USB device
You can use the INPUT 1 (HDMI) terminal when
connecting to a PC.
Connect a USB device to the TV.
CAUTION
• Do not disconnect a USB device from the TV while
transferring files, when a screen is in “USB” mode.
PC
• The illustrations used throughout this manual are based on LC-32LE155M.
3 4
Attaching the stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from
being damaged.
1Confirm the screws supplied with the TV.
Soft cushion
4
3
Screws (m5)
(used in step 2 and 3)
2Insert and hook post guide into stand base slot
holes. (1)
Fix the post using short screw. (2)
3Insert the stand base to the stand post on the
bottom of the TV. (3)
4Insert and tighten the 4 long screws into the 4
holes on the bottom of the stand base. (4)
NOTE
• To detach the stand, perform the steps in reverse order.
CAUTION
• Do not attach or detach the stand without holding it.
Doing so can cause the stand to fall, resulting in serious
personal injuries as well as damage to the stand.
Antenna connection
Connect antenna cable to the antenna terminal
If your outdoor antenna uses a 75-ohm coaxial
cable with a standard DIN45325 plug
(IEC 169-2), plug it into the antenna jack at the
rear of the set.
If your outdoor antenna uses a 300-ohm twin-
lead flat feeder, connect a 300-ohm to 75-ohm
impedance converter and plug it into the antenna
jack at the rear of the set.
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH
THE AC CORD CONNECTED.
NOTE
• Place the TV close to the AC outlet, and keep the power plug within reach.
• The illustrations used throughout this manual are based on LC-32LE155M.
or
LC-32LE155M_EN_F895.indd 2LC-32LE155M_EN_F895.indd 2 6/24/2013 3:29:11 PM6/24/2013 3:29:11 PM

5 6
Remote control unit
1
2
5
7
8
9
11
6
3
4
12
13
14
15
16
17
18
10 19
TIMER
7 VOLk/VOLl
Set the volume.
(VOLk) Increase the volume.
(VOLl) Decrease the volume.
8 e(Mute)
Press
esMutes sound.
Press
eagain sRestores sound.
Mute will be cancelled after 30 minutes. However, the TV
will not suddenly output loud sound as the volume level will
be set to 0 automatically. Increase the volume level by
pressing VOL k.
9 a/b/c/d(Cursor)
Select a desired item on the setting screen.
ENTER
Execute a command.
10 WIDE
Change the wide image mode. (See page 9.)
11 Colour (Red/Green/Yellow/Blue)
The coloured buttons are correspondingly used to select the
coloured items on the screen.
12 ECO
Reduce overall power consumption based on user
preferences. (See page 12.)
13 COLOUR ADJ. (FREEZE)
Freeze a motion picture on the screen and adjust the colour
tone of the still image. (See page 12.)
14 PHOTO
Display your pictures directly on the TV screen. (See page 13.)
15 INPUT (INPUT SOURCE)
Select an input source.
16 CHr/CHs
TV input mode: Select the channel.
(CHr) Increase the channel number.
(CHs) Decrease the channel number.
17 MENU
Display the menu screen.
18 MPX
Select the sound multiplex mode.
19 RETURN
MENU mode: Return to the previous menu screen.
1 POWER (STANDBY/ON)
To switch the power on and off. (See page 6.)
2 DISPLAY
Display the channel or input information.
3 TIMER
Set the Sleep Timer and Reminder. (See page 12.)
4 0 – 9
Set the channel.
5 A(Flashback)
Press
Ato return to the previous selected channel
or external input mode.
6 AV MODE
Select an audio and video setting. (See page 7.)
Inserting the batteries
Before using the TV for the first time, insert two “AAA” size batteries (supplied). When the batteries become
depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.
1Open the battery cover. 2Insert the two supplied “AAA” size
batteries.
3Close the battery cover.
• Place batteries with their terminals corresponding to
the (e) and (f) indications in the battery compartment.
CAUTION
• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
Part names
TV (Front)
POWER indicator
Light off Power off.
Lighted (Red) The TV is in standby mode.
Lighted (Green) The TV is on.
Remote control sensor
TV (Rear)
1
2
3
4
5
8
9
7
6
10
11
12
1POWER (On/Off) button
2MENU button
3INPUT button
4Channel up (r)/down (s) buttons
5Volume up (e)/down (f) buttons
6 USB terminal*
7INPUT 1 (HDMI) terminal
8SERVICE ONLY terminal**
9 INPUT 3 terminals
10 /AUDIO output (R/L) terminal
11 Antenna input terminal
12 INPUT 2 (COMPONENT/AV INPUT) terminals
* USB terminal use for USB Media Player. (See page 13.)
** Usually do not connect anything to this terminal as it is reserved only for service personnel.
• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.
• The illustrations used throughout this manual are based on LC-32LE155M.
Turning the TV on/off
Turning on/off the power Standby mode
• To turn on the power
Press POWER on the TV. (After a few seconds, an image
appears with sound.)
• To turn off the power
Switch it off by pressing POWER on the TV.
• To standby mode
If the TV is switched on, you can switch it to standby by
pressing POWER on the remote control.
• Switching on from standby
From standby, press POWER on the remote control.
NOTE
• If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet.
• Minor power is consumed when the unit is in standby mode.
LC-32LE155M_EN_F895.indd 3LC-32LE155M_EN_F895.indd 3 6/24/2013 3:29:11 PM6/24/2013 3:29:11 PM

7 8
Programme setup (Continued)
HManual adjust
You can set some channel items manually.
1Repeat steps 1 and 2 in Auto installation.
2Press a/bto select “Manual adjust”, and then
press ENTER.
If you have already set the password, enter it
here.
• See page 10 for setting a password.
3Press a/b
to select your desired item, and
then press
c/d to adjust the settings.
Item Description
Storage to
[1~99]
Save programme to your desired channel
number. Press Rto save.
Sound
system
Select the optimum sound system
(Broadcasting system) to receive. (B/G,
D/K, I, M)
Colour
system
Select the optimum colour system to
receive. (PAL, SECAM, NTSC)
Current CH Select the channel you want to edit.
•Selected channel will be automatically
reflected in the background.
Search Start searching from current channel.
•
Instead of pressing c/dto adjust the
frequency, you can set by directly entering the
frequency number of the channel with 0 — 9.
Press Rto save.
Fine-tune Tune the frequency of the stored channel
to your desired position.
•Adjust while checking the background
picture as a reference.
Press Rto save.
NOTE
• The frequency shown below the On-Screen Display shows
the real-time frequency of the displayed channel.
HProgramme edit
Use this menu to set up a channel individually.
1Repeat steps 1 and 2 in Auto installation.
2Press a/bto select “Programme edit”, and
then press ENTER.
3Press a/b
to select the channel you want to
edit, and then press 1 to 5 on the remote control
if necessary or press RETURN to exit .
• As you toggle down the channels, each channel is
immediately reflected in the background when you
press ENTER.
1(Erase programme)
Channels can be erased individually.
Press 1to erase the selected channel.
Initial auto installation
When the TV powers on for the first time after
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings
one after another.
1Press POWER on the TV.
• The initial auto installation wizard appears.
2Press a/bto select the desired language,
and then press ENTER.
3Press a/bto select “HOME” or “STORE”, and
then press ENTER.
• Auto installation will be executed.
• You do not need to do anything during the auto
search.
NOTE
• HOME mode: Settings are optimised for normal home
viewing and energy efficiency.
• STORE mode: Settings are designed for maximum impact
in retail store displays.
• To change the STORE mode to HOME mode, please refer
to page 10 to reset the unit.
Selecting a preset AV mode
“AV mode” gives you several viewing options to
choose from to best match the system environment,
which can vary due to factors like room-brightness,
type of programme watched or the type of image
input from external equipment.
1Press AV MODE.
2Each time you press AV MODE, the mode
changes.
• You can also switch the mode in the “AV mode”
menu on the “Picture” and “Audio” menu screen.
Selected item Description
STANDARD For a highly defined image in a normally
bright room.
MOVIE For a movie.
GAME For game play.
USER Allows the user to customise settings as
desired. You can set the mode for each
input source.
DYNAMIC For a clear-cut image emphasising high
contrast for sports viewing.
DYNAMIC
(FIXED)
Changes the image and sound settings to
the factory preset values. No adjustments
are allowed.
NOTE
• You can select a different AV mode item for each input
mode. (For example, select STANDARD for TV input and
DYNAMIC for VIDEO input.)
Menu operation
1Press MENU and the MENU screen displays.
2Press c/dto select the desired menu.
(Programme setup, Picture, Audio, ECO, Setup,
Option)
3Press a/bto select the desired menu item.
Press ENTER to proceed if necessary.
4Press a/bor c/dto select the desired item
or adjust the item to the desired level. Press
ENTER if necessary.
Programme setup
Programme setup
Auto installation
Auto search
Manual adjust
Programme edit
HAuto installation
You can run auto installation again, even after setting
up the preset channels.
1Press MENU and the MENU screen displays.
2Press c/dto select “ ” (Programme setup).
3Press a/bto select “Auto installation”, and
then press ENTER.
If you have already set the password, enter it
here.
• See page 10 for setting a password.
4Press a/bto select the desired language
listed on the screen, and then press ENTER.
You do not need to do anything during the auto
search. Press MENU to exit.
TV channel settings
You can reconfigure the TV channel settings
automatically or manually using Auto search,
Manual adjust or Programme edit.
HAuto search
Use this menu to add new services automatically
after “Auto installation” has been completed.
Auto search will memorise channels available at that
time.
1Repeat steps 1 and 2 in Auto installation.
2Press a/bto select “Auto search”, and then
press ENTER.
If you have already set the password, enter it
here.
• See page 10 for setting a password.
You do not need to do anything during the auto
search. Press MENU to exit.
2(Label)
When a TV channel sends its network name, the
“Auto installation” detects the information and
assigns a name to it. However, you can change
channel names individually.
Maximum 5 alphanumerics can be input.
Press 2to start labelling.
Press
a/b/c/d
to select a character,
and then press 2again or ENTER to save.
3(Sort)
Channel positions can be sorted freely.
Press 3to select the channel you want to move.
Press a/bto move it to the desired position, and
then press
3 again or ENTER to save.
4(Skip)
Channels with “Skip” set to “On” are passed
over when using CHr/seven if selected while
watching the image from the TV.
Press 4to skip the selected channel.
Press 4again to cancel the skip.
5(Lock)
You can block the viewing of any selected channel.
Password must be set first to allow “ ” to
function.
• See page 10 for setting a password.
Press 5to lock the selected channel.
Press 5again to unlock the locked channel.
Picture menu
Picture
AV mode
Picture adjust
Advanced
Wide mode
Reset
HPicture adjust
Adjusts the picture to your preference with the
following picture settings.
Selected item c button d button
Backlight The screen dims The screen
brightens
Contrast For less contrast For more contrast
Brightness For less brightness For more
brightness
Colour For less colour
intensity
For more colour
intensity
Tint Skin tones become
reddish
Skin tones
become greenish
Sharpness For less sharpness For more
sharpness
LC-32LE155M_EN_F895.indd 4LC-32LE155M_EN_F895.indd 4 6/24/2013 3:29:11 PM6/24/2013 3:29:11 PM

9 10
ECO menu (Continued)
HNo operation off
You can set the TV to automatically power off when
no TV operation is performed for more than 3 hours.
(30 min., 3 hr., Disable)
• Five minutes before the power shuts down, the remaining
time displays every minute.
Setup menu
Child lock
Input label
Identification
Reset
Setup
Language
HDMI auto view
4
HChild lock (TV input mode only)
Allows you to use a password to protect certain
settings from being accidentally changed.
Setting a password
1Repeat steps 1 and 2 in Menu operation.
2Press a/bto select “Child lock”, and then
press ENTER.
3If you have already set the password, enter it
here.
4Press a/bto select “Change password”, and
then press ENTER.
5Enter the 4-digit number as a password using
0 — 9.
6Enter the same 4-digit number as in step 5 to
confirm.
NOTE
• To view a locked channel, you must enter a password.
When you select a locked channel, “Child lock has been
activated” is displayed.
• Press ENTER to display the password input window.
Clearing the password
Allows you to clear your password.
1Repeat steps 1 to 3 in Setting a password.
2Press a/bto select “Clear password”, and
then press ENTER.
3Press c/dto select “Yes”, and then press
ENTER.
HInput label
You can assign each input source a label as you prefer
1Press MENU and the MENU screen displays.
2Press c/dto select “ ” (Setup).
3Press a/bto select “Input label”, and then
press ENTER.
4Press a/bto select an input, and then
press a/bto select a desired alphanumeric.
Maximum 6 alphanumerics can be input.
Press c/dto move to the desired alphanumeric
position.
To exit, press ENTER.
If the wrong alphanumeric is entered, select [ ]
to clear.
NOTE
• You cannot change Input label for TV input mode.
HHDMI auto view (HDMI input mode only)
Selected item Description
Enable/
Disable
Set whether or not to use the Auto
Selection of WIDE MODE based on signal
recognition received from the HDMI
signal.
HLanguage
Select from among 10 languages: English, Simplified
Chinese, Arabic, French, Portuguese, Russian,
Persian, Thai, Vietnamese and Indonesian.
HIdentification
You can check the current version of the software on
the screen.
HReset
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
NOTE
• If you execute “Reset”, all the settings such as “Picture”,
“Audio” and “Programme setup” will be reset to the factory
preset values.
Picture menu (Continued)
NOTE
• “Picture adjust” cannot be changed during “DYNAMIC
(FIXED)” mode.
HAdvanced
This TV provides various advanced functions for
optimising the picture quality.
Active contrast
Automatically adjusts the contrast of an image
according to the scene. (On, Off)
DNR (Digital Noise Reduction)
Reduces noise on screen and produces a clearer
video image. (Off, High, Low, Auto)
NOTE
• For resetting all “Picture adjust” items to factory preset
values, press a/bto select “Reset”, press ENTER, press
a/bto select “Yes”, and then press ENTER.
HWide mode
You can manually select the size of a picture
appeared on your screen.
Selectable picture size varies with the type of signal
received.
Press a/bwhile the wide mode menu displays on
the screen.
• As you toggle down the options, each mode is immediately
reflected on the TV.
Selected item Description
Normal For 4:3 “standard” pictures. A side bar
appears on each side.
Zoom 14:9 For 14:9 letterbox pictures. A thin side
bar appears on each side, and you may
also see bars on the top and bottom with
some programmes.
Panorama In this mode the picture is progressively
stretched toward each side of the screen.
Full For 16:9 squeeze pictures.
Cinema 16:9 For 16:9 letterbox pictures. Bars may
appear on the top and bottom with some
programmes.
Cinema 14:9 For 14:9 letterbox pictures. Bars may
appear on the top and bottom with some
programmes.
Dot by Dot Display an image with the same number
of pixels on the screen (only when
receiving 1080i / 1080p signal).
Auto Keeps the original aspect ratio and
enlarges the picture as much as possible.
Original Keeps the original aspect ratio and size.
NOTE
• You can also select an item by pressing WIDE on the
remote control unit.
• Some picture sizes may not be displayable depending on
the input signal.
• “Auto” and “Original” can be selected only during video
playback in “Movie mode” of USB Media Player.
Audio menu
Audio
AV mode
Sound adjust
Surround
Reset
HSound adjust
Selected item c button d button
Treble For weaker treble For stronger treble
Bass For weaker bass For stronger bass
Balance Decrease audio
from the right
speaker
Decrease audio
from the left
speaker
HSurround
When you set to “On”, you can enjoy surround
sound, the same as if you were in a movie theatre.
(On, Off)
NOTE
• For resetting all “Sound adjust” items to the factory preset
values, press a/bto select “Reset”, press ENTER, press
a/bto select “Yes”, and then press ENTER.
ECO menu
ECO
No signal off
No operation off
HNo signal off
You can set the TV to automatically power off in
about 15 minutes after the TV goes into a state of
receiving no programme signals. (Enable, Disable)
• Five minutes before the power shuts down, the remaining
time displays every minute.
NOTE
• When a TV programme finishes, and the TV receives signal
input, this function may not operate.
LC-32LE155M_EN_F895.indd 5LC-32LE155M_EN_F895.indd 5 6/24/2013 3:29:11 PM6/24/2013 3:29:11 PM

11 12
Option menu
Input select
Option
Auto volume
Demo
System data
Audio only
Audio output select
Colour system
4
HAudio output select
You can select which device is used for outputting
audio.
Option Description
Headphone Output audio through headphones.
Audio out Output audio through an A/V receiver or
surround audio controller.
NOTE
• If you select “Headphone” when a cable is inserted in the
AUDIO output terminal, the TV speakers are muted and all
Audio menu items cannot be adjusted.
• If you select “Audio out”, sound via the AUDIO output
terminal is not adjustable and constantly outputs.
Regarding the headphone jack
• Use headphones with a stereo mini plug ( 3.5 mm).
• Be sure to unplug headphones from the jack when they
are not in use.
Volume display when headphones are plugged in
30
CAUTION
• AUDIO output terminal is also used for headphones.
Reduce the volume before using headphones.
Overwhelming sound may damage your hearing.
HInput select
For setting the signal type of external equipment.
Input source Selectable item
INPUT2 Component, Video
HAuto volume
Different sound sources, fairly often do not have the
same volume level, for example the changing from
movie to the advertisements. Auto volume solves this
problem and equalises the volume levels. (On, Off)
HAudio only
When listening to music from a music programme,
you can set the display off and enjoy audio only.
Selected item Description
On Audio is output without screen image.
Off Both screen images and audio are
output.
NOTE
• When you make operations that change the picture on the
TV such as by changing the input source, the Audio only
function is set to “Off”.
HColour system
You can change the colour system to one that is
compatible with the image on the screen. (Auto,
PAL, SECAM, NTSC 3.58, NTSC 4.43, PAL-60)
NOTE
• If “Auto” is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).
• “Colour system” is selectable only when inputting a
composite signal.
HDemo
When “Demo” is set to “On”, after all the settings are
completed, the Demo screen is displayed if there is
no operation for several minutes. (On, Off)
HSystem data
This function allows you to update the TV to the
latest software using a USB device. You must
update the software through the USB terminal.
Colour adjustment and still image
Allows you to adjust the colour tone of a still image.
1Press COLOUR ADJ. (FREEZE), the moving
image will be captured and colour adjustment
screen displays.
2Press a/b/c/dto adjust the colour to your
desired setting.
Button Description
aWhite with greenish tone.
bWhite with reddish tone.
cWhite with bluish tone.
dWhite with yellowish tone.
RReveal/hide the setting screen.
GSet adjustment to last user setting.
BClose the setting screen and unfreeze
image.
ENTER Save/exit setting.
NOTE
• The colour adjustment screen and still image will
automatically goes out after 30 minutes.
• Freeze/Colour adjustment function does not work in USB
Photo/Movie playback. It works for HDMI and composite/
component.
ECO mode
This function enables you to reduce the backlight
brightness in order to decrease the power
consumption and increase the backlight life span as
shown in the following table.
Selected item Description
ECO 1 Reduces the backlight brightness.
ECO 2 Reduces the backlight brightness more
than “ECO 1”.
ECO off Normal setting of backlight brightness.
ECO status will be displayed on the channel
information window.
Timer
Press TIMER to set the Sleep Timer or a Reminder
for an activity.
HSleep Timer
This function is conveniently used when, for instance,
going to bed while watching TV.
(Off, 0 hr. 30 min., ……, 2hr. 30 min.)
H(Reminder)
This function is to set a reminder for an activity.
Press a/bor ENTER to set.
NOTE
• If you turn off the TV, the counter will be reset.
• Timer function does not work in USB mode.
LC-32LE155M_EN_F895.indd 6LC-32LE155M_EN_F895.indd 6 6/24/2013 3:29:11 PM6/24/2013 3:29:11 PM

13 14
USB Media Player (Continued)
Control panel for photo/music/movie mode operations
• Press Bto display the control panel below.
Button/menu Description Photo Music Movie
ENTER When selecting a folder icon: Enter this
directory.
When selecting a thumbnail:
Play the selected file.

Play/Pause. 
Rewind. Each time you press rewind, the speed
will change (2x, 4x, 8x, 16x). –
Fast-forward. Each time you press fast-forward,
the speed will change (2x, 4x, 8x, 16x). –
Play the previous file. 
Play the next file. 
G / Stop playback and return to the list of files. 
Loop. Each time you press ENTER, the mode
will switch between Repeat t No repeat. 
Play/cancel the background music. ––
Mute. Press ENTER to toggle between mute
and unmute. ––
Two loop. Press ENTER to set the current
playback time starting point. Press ENTER to
set the loop end of the current playing time and
start loop playback. Press ENTER button to
cancel the loop.
––

Show playlists. Select a file from the playlists to
start playback. 
Display information about the file. 
Slow-forward.
Each time you press slow-forward, the speed
will change.
––

Single frame-forward.
Each time you press ENTER, the picture will
change to the next still picture.
––

Set time for music/movie playback. – 
Rotate clockwise 90º. ––
Rotate counterclockwise 90º. ––
Zoom in an image. Select to display larger
image size. ––
Zoom out an image. Select to display smaller
image size. ––
Pan image up, down, left or right after you
zoom in. Press ENTER to exit. ––
Select playback length of a slideshow. ––
Select photo display interval. ––
NOTE
• Files in folder which are not related to a selected mode cannot be accessed.
• “Unsupported file” alert will pops up for a selected file of invalid format.
USB Media Player
HSelecting modes
Photo mode Music mode Movie mode
USB
1Press INPUT to select the “USB” mode or the
TV will automatically switch to the USB mode
when a USB device is connected to the TV.
2Press c/dto select “Photo mode”, “Music
mode” or “Movie mode”, and then press
ENTER.
3Press c/dto select your USB directory, and
then press ENTER.
4Press a/b/c/dto select the desired folder,
and then press ENTER.
NOTE
• “Wide mode” is fixed during “Photo mode” and “Music mode”.
• Depending on the USB device, the TV may not be able to
recognise the contained data.
• Use only alphanumeric characters for naming files.
• A file name with more than 10 characters may not be
displayed all (depending on the character set).
• Files in USB 1.1 devices may not be played properly.
• Operation using USB hubs is not guaranteed.
• The compatibility of USB HDDs may not be guaranteed.
• Multi drive USB is not supported.
PHOTO slideshow
C:\Photo 1/2
Back
Fireworks.jpg
Switzerland.jpg Japan-hokkaid.. Island.jpgSki Action.jpg
WxH:
1300 X 822
Size:
789 KBytes
Date:
2011 / 08 / 04
Time:
10 : 12 :12
Ski Action.jpg
When you press PHOTO, the TV screen will
automatically play the photo slideshow.
• If there is no USB drive, the TV will switch to Selecting
modes screen.
• Photo slideshows will autoplay only for the photos located
on the top layer of USB drive. To enable autoplay for
photos located in a subfolder, you need to manually select
the subfolder, and then press PHOTO.
You can select the duration for each photo to
display, and also the duration for the slideshow to
play.
Duration for photos to display
1 minute10 seconds5 seconds3 seconds
Duration for slideshow to play
Continuous3 hour1 hour
• The TV will automatically power off after the
selected playtime ends.
NOTE
• Background music will autoplay during a slideshow only if the
music file is located in the same folder with the photo files.
• If you want to stop the photo slideshows, press RETURN to
exit.
List of files compatible with USB mode
USB device/
File system
USB Memory / FAT/FAT32
Photo file format JPEG (.jpg) (DCF2.0 compliant).
Progressive format of jpeg files
are not supported.
Music file format
(Files may not be
playable depending
on the bitrate)
MP3 (.mp3) Bitrate: 32 k, 40 k,
48 k, 56 k, 64 k, 80 k, 96 k,
112 k, 128 k, 160 k, 192 k, 224 k,
256 k, 320 kbps
Sampling frequency: 32 k, 44.1 k,
48 kHz
Video file format
File extension Container Video
*.avi AVI XviD
H.264
MPEG2
*.mkv MKV H.264
MPEG2
MPEG1
*.mp4 MP4 XviD
H.264
*.vob VOB MPEG2
*.mpg/*.mpeg PS MPEG2
MPEG1
*.rm/*.rmvb RM RM codec
*.ts/*.trp/*tp TS H.264
MPEG2
*.dat DAT MPEG2
MPEG1
LC-32LE155M_EN_F895.indd 7LC-32LE155M_EN_F895.indd 7 6/24/2013 3:29:11 PM6/24/2013 3:29:11 PM

15 16
Appendix
Troubleshooting
The problems described below are not always caused by malfunctions. Check the TV again before having the
TV serviced.
Problem Possible Solution
• No power. • Check if you pressed POWER on the remote control unit. (See page 6.)
If the indicator on the TV lights up red, press POWER.
• Is the AC cord disconnected?
• Has the power been turned on? (See page 6.)
• Unit cannot be operated. • External influences such as lightning, static electricity, etc., may cause improper
operation. In this case, operate the unit after first turning the power off the TV or
unplugging the AC cord and re-plugging it in after 1 or 2 minutes.
• Remote control unit does not
operate.
• Is battery inserted with polarity (e, f) aligned? (See page 5.)
• Is battery worn out? (Replace with new battery.)
• Are you using it under strong or fluorescent lighting?
• Is a fluorescent light shining on the remote control sensor?
• Picture is cut off. • Are screen mode adjustments such as picture size made correctly?
(See pages 8 to 9.)
• Strange colour, light colour, or
dark, or colour misalignment.
• Adjust the picture tone. (See pages 8 to 9.)
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the colour system setting. (See pages 8, 11.)
• Check the HDMI auto view setting. (See page 10.)
• Power is suddenly turned off. • The unit’s internal temperature has increased.
Remove any objects blocking the vent or clean.
• Check the ECO setting. (See pages 9 to 10.)
• Is the sleep timer set? (See page 12.)
• No picture. • Is the connection to external equipment correct? (See page 4.)
• Is the “Picture adjust” correct? (See page 8.)
• Is the antenna connected properly? (See page 3.)
• Is “On” selected in “Audio only”? (See page 11.)
• No sound. • Is the volume too low? (See page 5.)
• The TV sometimes makes a
cracking sound.
• This is not a malfunction. This happens when the cabinet slightly expands and
contracts according to changes in temperature. This does not affect the TV’s
performance.
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly
delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near
a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature:
f20°C to e60°C.
Clearing the password
1Repeat steps 1 to 2 in Setting a password. (See page 10.)
2The password input screen displays.
3If you enter “3001” using 0 – 9, the “Child lock” setting menu will be displayed.
4Enter the 4-digit number as a password using 0 – 9. The new password is now set.
Specifications
Item Model LC-32LE155M LC-39LE155M
Screen size 80 cm 98 cm
Resolution 1,049,088 pixels (1366 g768) 2,073,600 pixels (1920 g1080)
Video Colour System PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
TV
Function
TV-Standard PAL: B/G, D/K, I SECAM: B/G, D/K, K/K1NTSC: M
Receiving
Channel
VHF/UHF 43.25—863.25 MHz 44.25—863.25 MHz
CATV S1—S41ch (including Hyperband)
TV-Tuning System Auto Preset 99 ch
STEREO/BILINGUAL NICAM: B/G, I, D/K A2 stereo: B/G
Viewing angles H : 178º V : 178º H : 176º V : 176º
Audio amplifier/Speakers 5 W g2 / 3 g10 cm 2pcs
Terminals Antenna input UHF/VHF 75 qDIN type
INPUT 1 HDMI (HDMI input), PC input
INPUT 2 VIDEO in, AUDIO in, COMPONENT in
INPUT 3 VIDEO in, AUDIO in
OUTPUT AUDIO out, Headphone ( 3.5 mm stereo)
USB USB
OSD language English/Simplified Chinese/Arabic/French/Portuguese/Russian/Persian/Thai/
Vietnamese/Indonesian
Power Requirement AC 110—240 V, 50/60 Hz
Power Consumption 45 W (1.0 W Stand by) 57 W (1.0 W Stand by)
Dimensions without stand 745 (W) g465 (H) g81 (D) mm 898 (W) g553 (H) g81 (D) mm
with stand 745 (W) g545 (H) g210 (D) mm 898 (W) g633 (H) g236 (D) mm
Weight 5.6 kg (without stand) / 6.3 kg (with stand) 6.3 kg (without stand) / 7.0 kg (with stand)
Operating Temperature 0°C — 40°C
• As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for
product improvement without prior notice. The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
CAUTION
• Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service personnel.
Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or
mounting that results in accident or injury.
• Carefully read the instructions that come with the bracket before beginning work.
LC-32LE155M_EN_F895.indd 8LC-32LE155M_EN_F895.indd 8 6/24/2013 3:29:11 PM6/24/2013 3:29:11 PM