Sharper Image Freedom User manual

ONE YEAR LIMITED WARRANTY
SI PRODUCTS sells its products with the intent that they are free of defects in manufacture and
workmanship for a period of one year from the date of original purchase, except as noted below.
SI PRODUCTS warrants that its products will be free of defects in material and workmanship under
normal use and service. This warranty extends only to consumers and does not extend to Retailers.
To obtain warranty service on your Sharper Image product, contact a consumer relations
representative by telephone at 1-888-856-6781 for assistance. Please make sure to have the model
number of the product available.
SI PRODUCTS does not authorize anyone, including, but not limited to, Retailers, the subsequent
consumer purchaser of the product from a Retailer or remote purchasers, to obligate SI PRODUCTS
in any way beyond the terms set forth herein. This warranty does not cover damage caused by
misuse or abuse; accident; the attachment of any unauthorized accessory; alteration to the product;
improper installation; unauthorized repairs or modifications; improper use of electrical/power supply;
loss of power; dropped product; malfunction or damage of an operating part from failure to provide
manufacturer’s recommended maintenance; transportation damage; theft; neglect; vandalism; or
environmental conditions; loss of use during the period the product is at a repair facility or otherwise
awaiting parts or repair; or any other conditions whatsoever that are beyond the control of SI
PRODUCTS.
This warranty is effective only if the product is purchased and operated in the country in which the
product is purchased. A product that requires modifications or adoption to enable it to operate in any
other country than the country for which it was designed, manufactured, approved and/or authorized,
or repair of products damaged by these modifications is not covered under this warranty.
THE WARRANTY PROVIDED HEREIN SHALL BE THE SOLE AND EXCLUSIVE WARRANTY. THERE
SHALL BE NO OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS OR ANY OTHER OBLIGATION ON THE PART OF THE COMPANY
WITH RESPECT TO PRODUCTS COVERED BY THIS WARRANTY. SI PRODUCTS SHALL HAVE NO
LIABILITY FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES. IN NO EVENT SHALL
THIS WARRANTY REQUIRE MORE THAN THE REPAIR OR REPLACEMENT OF ANY PART OR PARTS
WHICH ARE FOUND TO BE DEFECTIVE WITHIN THE EFFECTIVE PERIOD OF THE WARRANTY.
NO REFUNDS WILL BE GIVEN. IF REPLACEMENT PARTS FOR DEFECTIVE MATERIALS ARE NOT
AVAILABLE, SI PRODUCTS RESERVES THE RIGHT TO MAKE PRODUCT SUBSTITUTIONS IN LIEU
OF REPAIR OR REPLACEMENT.
This warranty does not extend to the purchase of opened, used, repaired, repackaged and/or resealed
products, including but not limited to sale of such products on Internet auction sites and/or sales of
such products by surplus or bulk resellers. Any and all warranties or guarantees shall immediately
cease and terminate as to any products or parts thereof which are repaired, replaced, altered, or
modified, without the prior express and written consent of SI PRODUCTS.
This warranty provides you with specific legal rights. You may have additional rights which may vary
from state to state. Because of individual regulations, some of the above limitations and exclusions
may not apply to you. For more information regarding our product line in the USA, please
visit: www.siproducts.com
THE SHARPER IMAGE ® name and logo are registered trademarks.
Marketed and distributed by SI Products under license. ©The Sharper Image.
All rights reserved.
IB-ESIP400
portable Bluetooth® wireless speaker
Freedom

Thank you for purchasing Sharper Image Freedom Portable
Bluetooth® Wireless Speaker for smartphones, tablets, notebook
computers and other Bluetooth enabled devices. This product,
along with the entire Sharper Image Electronics lineup, combines
high-tech innovation with design to provide you with years of
dependability and enjoyment.
Getting Started
Unpack the unit carefully. Remove all the accessories from the display carton. Do not
remove any labels or stickers on the rear of the unit and adaptor.
Power Source
To charge the Freedom, foldout the wall prongs –simply plug it into a wall outlet.
Controls
Volume Controls
Speakerphone Button
Play/Pause Button
Power Switch
Bluetooth® Indicator
Battery Indicator
Indicators
Indicator Status
Flashing Green Low Battery
RED Charging
Solid Green Fully Charged
(when plugged
into wall socket)
Slowly Flash Blue Pairing Mode
Quickly Flash Blue Connected
RED Line-In Mode
Line-In Audio Jack
Flap to conceal fold
out prongs

Listening to your device wirelessly over Bluetooth®
To listen to your music over Bluetooth wireless connection, you need to pair your
device with The Sharper Image Freedom:
1. Make sure your device has Bluetooth capability.
2. Slide the POWER switch to turn on the unit, indicator will begin to flash.
3. Follow the instructions of your device to pair the unit.
4. Pair your device with the unit by selecting FREEDOM from your Bluetooth
listings on your device or selecting YES. If prompted, enter “0000” as the
passcode.
5. Press play on your device and use controls on the unit to adjust desired volume.
NOTE: Once you have successfully paired your device, you will not need to
repeat the above steps. Please ensure the AUX cable is unplugged, the unit
source is set to Bluetooth and your device has Bluetooth enabled.
Listening to your device through the Line In Audio Jack
1. Connect Aux-in cable to the headphone or line-out jack of an audio device
and plug the other end of the cable into the Line-In Audio Jack on the back
of the unit.
2. Slide the POWER SWITCH to turn on the unit.
3. Press PLAY on the device and use controls on the unit to adjust
desired volume.
FCC Disclaimer:
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment.
Such modifications could void the user authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Charging the Unit
Approximately 3 hours required for full charge.
Unit can be charged by plugging it into a wall socket.
Note: Battery will last for approximately 4 hours when connected wirelessly and
up to 12 hours when connected through Aux-In Audio Jack.