Shear Magic Tuffy 3800 User manual

PAGE 1 OF 3
Universal – Fits all A5
style Detachable Blades
Tuy 3800
CORDLESS LI-ION CLIPPER
The Shear Magic Tuffy 3800 Professional Clipper is a cordless high performance grooming clipper
that gets through tough coats. This heavy duty 2 Speed cordless clipper features a detachable
Lithium-Ion battery that runs up to 4 hours providing the freedom of movement you need. The Shear
Magic Tuffy 3800 is compatible with all A5™detachable style blades, including wide blades.
FEATURES & BENEFITS
• Powerful Two Speed Heavy Duty Motor
• 2 Speed – 3,800 and 3000 strokes per minute
• Ergonomic design for easy hold and maneuverability
• Great for body clipping and detailing
• High power, environmentally friendly, Lithium-Ion battery provides
continuous power and holds a longer charge.
• Compatible with all brands of A5 style detachable blades,
including the Shear Magic wide detachable blades
• Dual port supercharger – allows fast and normal speed charging
EXTRA INFO
Model Shear Magic Tuffy 3800
Code T3800
Blade Type Compatible with all A5 style detachable universal blades
Stokes per minute 3,000 and 3,800 (Two-Speed)
Motor type DC Rotary Motor 12V
Battery Lithium Ion 4hr
Charge time Fast Charge: 180 minutes Slow Charge: 240 minutes
Watts 24
Clipper weight 360g (without blade)
Warranty 2 years against any manufacturing fault
CORDLESSHEAVY DUTY CLIPPER
TUFFY 3800
Clips any dog –
must have
correct blade and
clean dog
LED SIGNAL DISPLAY
Clipper:
• Low Speed – Red light
• High Speed – Green light
• Low Battery – Red light twinkling
• Overload – Red light quickly blinking
Charging Station:
• Charging – Blue light twinkling
• Full Charged – Blue light
• Error - Red light twinkling
KIT INCLUDES:
• Shear Magic Professional
Size 10 detachable blade
• Charging station
• Adaptor
• Lubricating oil
• Cleaning brush

PAGE 2 OF 3
FAQ
How do I properly remove the blade from my clipper?
Your blade is attached to a hinge assembly. To remove the blade
(A5 detachable blade) hold the release latch assembly by manually
pushing the latch forward and take the blade away from the clipper
head. You can slide the blade off the hinge and replace the new
blade on the hinge. Your hinge should stay open 45°. Failing this
you have to use a screwdriver to re-open the hinge assembly.
How do I get my blade back on my clipper?
First, ensure that the rectangular metal “tongue” or blade hinge
assembly is in standing position or open. If it is closed, insert a flat
head screwdriver under the tongue and applying enough force,
push the hinge back to standing position. Once this is complete,
slide the blade on the tongue, turn your clipper on and push the
blade down and snap the hinge assembly closed. This will ensure
the proper engagement of the blade on the driving tip. If you have
any further questions, please call us.
FULL SPARE PARTS AVAILABLE FOR SALE
FROM BOTANY BAY IMPORTS
Phone: [phone]
[e-mail]
botanybayimports.com.au
Follow us on Social Media
TheClipperSpecialist
Botany Bay The Clipper Specialists
botanybayimports
My blade doesn’t cut
Performance of blade – if the lever is worn, this will affect
the cutting performance, because it will not throw the cutter
sufficiently left to right to do the proper cutting. At this instance
lever must be change
How do I grease my clipper?
It is important to check the gearbox to ensure you have enough
grease in your gearbox. In order to grease the clipper, remove the
casing to access to the gear box. This will allow you to determine
if the clipper needs to be greased. If clipper does need grease, use
about 1/2 teaspoon. Make sure the grease covers the gears. Most
of our products come packed with a grease tube.
Why does my blade rattle on my clipper?
Over time the socket on your blades
may have become damaged. Check the
“wings” on your blade socket to see if
they may be bent outward or broken.
SHEAR MAGIC
TUFFY 3800
Wings

PAGE 3 OF 3
Trouble Shooting
Malfunction Cause Rectification
Top blade does not move • Clipperhead is not well engaged Engage the clipperhead correctly when the motor is running
• Drive lever is defective Replace drive carrier (*)
Clipper cuts badly or not at all • Clipper blade is blunt Have top and bottom blades resharpenend by service center (*)
• Clipper blades have not been correctly ground Have top and bottom blades resharpenend by service center (*)
• Clipper blades are not oiled Oil clipper blades every 15 minutes
• The animal‘s hair is wet Only clip dry hair
• Hairs jammed between top and bottom blades Take off clipperhead, push the top blade half away from the clipperhead, take away
hairs between top and bottom blade
• Clipperhead has too little clipping pressure Have clipperhead inspected (*)
Motor is not running • Battery flat Charge battery
• Contacts dirty Switch clipper off and clean the contacts
• Faulty battery Replace battery (*)
• Smell of burning from the motor housing. Motor burned out. Have motor and / or electronics replaced (*)
• Motor and/or electronics faulty Have motor and / or electronics replaced (*)
• Clipperhead blocked Clean and oil clipperhead
Motor runs very slowly • Clipper blades were not oiled sufficiently Oil clipper blades
Running time of a fully charged battery is
too short and / or blades are getting hot
• Clipper blades were not oiled sufficiently Oil clipper blades
• Flat, not fully charged or faulty battery is being used Only use intact, fully charged original batteries
The control light of the charging station in not on • Charging station is not connected to the power supply Connect the charging station to the power supply
• Charging station is faulty Have charging station inspected (*)
When charging flat battery the light does
not change from one colour to next
• Contacts dirty Clean contacts
• Faulty battery? Replace battery (*)
• Contacts of the charging station are deformed Have the charging station repaired (*)
SHEAR MAGIC
TUFFY 3800
*Visit our website for a list of service centres