Shindaiwa AH262 User manual

X7502342300
© 6/2017 ECHO Inc.
ENGLISH
Operator’s Manual
Specifications, descriptions and illustrative material in this literature are
as accurate as known at the time of publication, but are subject to
change without notice. Illustrations may include optional equipment and
accessories, and may not include all standard equipment.
x7722271404 / x772000164
AH262
Articulated Hedge Trimmer
Burn Hazard
The muffler or catalytic muffler and surrounding cover
may become extremely hot. Always keep clear of
exhaust and muffler area, otherwise serious personal
injury may occur.
The engine exhaust from this product contains chemicals
known to the State of California to cause cancer, birth defects,
or other reproductive harm.
Users of this equipment risk injury to themselves and
others if the unit is used improperly and/or safety
precautions are not followed. Echo provides an
operator’s manual and a safety manual. Both must be
read and understood for proper and safe operation. Failure to
do so could result in serious injury.
Note: This product complies with CAN ICES-2/NMB-2

TABLE OF CONTENTS AH262
2 X7502342300
© 6/2017 ECHO Inc.
TABLE OF CONTENTS
Table of Contents............................................................................................ 2
Introduction..................................................................................................... 3
Servicing Information...................................................................................... 3
Parts/Serial Number................................................................................ 3
Service .................................................................................................... 3
Consumer Product Support..................................................................... 4
Product Registration................................................................................ 4
Additional or Replacement Manuals........................................................ 4
Safety.............................................................................................................. 4
Manual Safety Symbols and Important Information ................................ 4
International Symbols.............................................................................. 5
Personal Condition and Safety Equipment.............................................. 7
Equipment ............................................................................................. 11
Emission Control (Exhaust & Evaporative) .................................................. 12
CARB And EPA Emissions Control Information .................................... 12
Description.................................................................................................... 14
Contents ....................................................................................................... 16
Assembly ...................................................................................................... 16
Gear Housing Assembly / Drive Shaft .................................................. 16
Operation...................................................................................................... 17
Fuel ....................................................................................................... 17
Adjusting Cutting Angle......................................................................... 20
Starting Cold Engine ............................................................................. 21
Starting Warm Engine ........................................................................... 22
Stopping Engine.................................................................................... 24
Hedge Trimming .................................................................................... 24
Maintenance ................................................................................................. 25
Skill Levels ............................................................................................ 25
Maintenance Intervals ........................................................................... 26
Air Filter................................................................................................. 27
Fuel Filter .............................................................................................. 28
Spark Plug............................................................................................. 29
Cooling System ..................................................................................... 29
Exhaust System .................................................................................... 30
Carburetor Adjustment .......................................................................... 32
Lubrication............................................................................................. 33
Blades ................................................................................................... 35
Troubleshooting ............................................................................................ 37
Storage ......................................................................................................... 39
Long Term Storage (Over 30 Days) ...................................................... 39
Specifications ............................................................................................... 41
Product Registration ..................................................................................... 42

AH262 INTRODUCTION
X7502342300 3
© 6/2017 ECHO Inc.
ENGLISH
INTRODUCTION
Welcome to the Shindaiwa family. This Shindaiwa product was designed
and manufactured to provide long life and on-the-job dependability. Read
and understand this manual and the safety manual. Keep the manuals in a
safe place for future reference.
The operators manual contains specifications and information for safety,
operation, maintenance, storage and assembly specific to this product.
The safety manual explains possible hazards and the measures you should
take to insure safe operation.
SERVICING INFORMATION
Parts/Serial Number
Genuine SHINDAIWA Parts and
Assemblies for your
SHINDAIWA products are
available only from an
Authorized SHINDAIWA Dealer.
When you do need to buy parts
always have the Model Number
and Serial Number of the unit
with you. You can find these
numbers on the engine housing.
For future reference, write them
in the space provided below.
Model No. _________________
Serial No. _________________
Service
Service of this product during the warranty period must be performed by an
Authorized SHINDAIWA Service Dealer. For the name and address of the
Authorized SHINDAIWA Service Dealer nearest you, ask your retailer or
call: 1-877-986-7783. Dealer information is also available on
WWW.SHINDAIWA-USA.COM. When presenting your unit for Warranty
service/repairs, proof of purchase is required.

SAFETY AH262
4 X7502342300
© 6/2017 ECHO Inc.
Consumer Product Support
If you require assistance or have questions concerning the application,
operation or maintenance of this product you may call the SHINDAIWA
Consumer Product Support Department at 1-877-986-7783 from 8:00 am to
5:00 pm (Central Standard Time) Monday through Friday. Before calling,
please know the model and serial number of your unit.
Product Registration
To ensure trouble free warranty coverage it is important that you register
your SHINDAIWA equipment on-line at WWW.SHINDAIWA-USA.COM or by
filling out the product registration sheet included in this manual. Registering
your product confirms your warranty coverage and provides a direct link
between you and ECHO if we find it necessary to contact you.
Additional or Replacement Manuals
Replacement Operator and Parts Catalogs are available from your
SHINDAIWA dealer or at WWW.SHINDAIWA-USA.COM or by contacting
the Consumer Product Support Department (1-877-986-7783). Always
check WWW.SHINDAIWA-USA.COM for updated information.
SAFETY
Manual Safety Symbols and Important Information
Throughout this manual and on the product itself, you will find safety alerts
and helpful, informational messages preceded by symbols or key words.
The following is an explanation of those symbols and key words and what
they mean to you.
The safety alert symbol accompanied by the word “DANGER”
calls attention to an act or condition which WILL lead to serious
personal injury or death if not avoided.
The safety alert symbol accompanied by the word “WARNING”
calls attention to an act or condition which CAN lead to serious
personal injury or death if not avoided.

AH262 SAFETY
X7502342300 5
© 6/2017 ECHO Inc.
ENGLISH
The safety alert symbol accompanied by the word “CAUTION”
calls attention to an act or condition which may lead to minor or
moderate personal injury if not avoided.
The enclosed message provides information necessary for the
protection of the unit.
Note: This enclosed message provides tips for use, care and
maintenance of the unit.
CIRCLE AND SLASH SYMBOL
This symbol means the specific action shown is prohibited.
Ignoring these prohibitions can result in serious or fatal injury.
International Symbols
Symbol Description Symbol Description
Warning, See
Operator’s Manual
Carburetor Adjustment -
High Speed Mixture
Wear Eye, Ear and
Head Protection
Carburetor Adjustment -
Idle Speed
Wear Hand Protection Carburetor Adjustment -
Low Speed Mixture
Safety/Alert Emergency Stop
Hot Surface Fuel and Oil Mixture
H
T
L