Shintaro MAXIFI User manual

MAXIFI BLUETOOTH HEADSET
USER GUIDE

Button Functions:
Button
Function
Action
On/Off Button
Headset on
Slide switch to icon “ ”
Headset off
Slide switch to icon “off”
Plus Button
Volume up
Tap the Plus button to increase the speaker
volume
Next song
Press the Plus button for 2 seconds to switch to
the next song when playing music
Mic mute
Press the Plus button for 2 seconds to activate
“mute”during a call. Press the Plus button for 2
seconds to cancel “mute”.
Minus Button
Volume down
Tap the Minus button to decrease the speaker
volume
Last song
Press the Minus button for 2 seconds to switch to
the last song when playing music
Multi-function Button
Pause
Tap the Multi-function button when playing music
Answer /end call
Tap the Multi-function button
Reject call
Press the Multi-function button for 2 seconds.
Headset LED Indicators
Headset Status
LED Status
Pairing Mode
Light flashes blue and red alternately
Pairing Successfully
Light flashes blue repeatedly every 5
seconds
Battery Low
Light flashes red continuously
Charging Mode
Red light continuously on
Fully Charged
Blue light continuously on

Prompt Tone Introduction
Headset Status
Tone
Power on
Power on
Power off
Power off
Pairing Successfully
Connect
Volume up/down
“toot”
Battery Low
“toot” every 5 minutes
Mic Mute
“toot” every 3 seconds
Pairing with a Bluetooth Device
1. Be sure that your smart phone, laptop or desk phone is equipped with Bluetooth.
2. Connect the cradle to the USB power supply. Before use, fully charge the headset.
3. Activate the Bluetooth function on your smart phone, laptop or desk phone.
4. Turn on your headset (slide switch to icon “ ”), you will hear prompt tone” power on”.
The Led indicator will flash red and blue alternately, which indicates the headset is in pairing mode.
5. (If pairing fails, the headset will power off automatically after about 5mins, with prompt tone “power off” heard.)
6. Pair headset to your smart phone, laptop or desk phone.
1) Search Bluetooth device on your smart phone, laptop or desk phone.
2) Open “Bluetooth” menu and press “discover” or “add” to search M800BTon your smart phone, laptop or
desk phone.
3) When M800BT shows on your Bluetooth devices list, please click it to start pairing. Prompt tone “connect” will
be heard when pairing is successful, and the LED indicator will repeatedly flash blue every 5 seconds.
4) Your headset will pair with your Bluetooth device automatically when you turn on the headset and Bluetooth
device.
Function Introduction:
1. Pairing with 2 devices simultaneously
1) Connect the first device with your headset
2) Turn off the Bluetooth function of the first device
3) Connect the second device with your headset
4) Turn on the first device’s Bluetooth function, then your headset is paired with both devices.
2. Redial function
Quick press the multi-function button twice to redial the last call.
3. One-touch play function
Press the multi-function button once, the default music player of your mobile phone will play automatically (some
mobile phones cannot implement this function).
4. Automatic re-connection function
Bluetooth connection will automatically re-connected if you take your headset out of range for a short period. If
reconnect fails, please turn off the headset and turn it on again to reconnect.
5. Mic mute function
Long press the plus button for 2 seconds to activate mute during a call, repress the plus button for 2 seconds
to cancel mic mute. The tone “toot” will be heard every 3 seconds during mic mute status.

Specifications
Pairing Name: M800BT
Bluetooth Specification:CSR8635. V4.1,dual mode, downward compatible.
Frequency Range: 2.4GHz-2.480GHz
Modulation: GFSK,π/4 DQPSK, 8DPSK
Two Bluetooth devices can be connected at the same time.
Transmission Distance: up to 20 meters
(Transmission distance varies depending on the environment and Bluetooth device)
Maximum Talk Time: 12 hours
Standby Time: 250 hours Working Temperature: 0℃ to
45℃ Speaker:
Resistance: 32 ohms
Frequency: 20Hz-20KHz, Hi-fi
Sensitivity: 115dB±3dB
Distortion:≦1% Microphone:
Microphone: Noise Canceling
Sensitivity: -38dB±3dB
Crystal clear sound and voice (DSP)
Headset Battery:
Type: Lithium-ion polymer
Capacity:150mA per hour stand
Battery Capacity: 150mAh
Charging Voltage: 5V DC
Life Time: Minimum recharging 1000 times
Operating Temperature: -10℃ to +60℃
Charging Time: 2 hours
Charging interface: Micro USB
Charging Base
Size:74.7*74.7*52mm
Net Weight:
Net Weight:105g
Cautions:
1. Charge your headset promptly when the headset beeps and the indicator turns red.
2. Do not leave your headset in the charging cradle for extended periods without use.
3. The headset contains a Lithium Iron battery. Keep away from fire, water, moisture,
and physical damage to avoid risk of explosion.
4. Use of the headset at high volume for extended periods may cause hearing loss.
5. Only use the supplied cradle to charge the headset..
6. Fully charge the headset prior to use
Ensuring you fully charge your battery once a month will extend battery life.

Product Warranty Card
Warranty:
Failure of headset buttons, speaker or microphone; charge unavailable.
Out of Warranty:
1. Ear cushions broken.
2. Fail to follow the user manual or disassemble the headset.
3. Incorrect connect with high voltage device for charging which causes earphone damage.
4. Artificial damage caused by impact, falling, water, pulling.
OQC
CHECKING
www.shintaro.com.au