shopPOPdisplays Acrylic Deluxe Podium Lectern User manual

ASSEMBLY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE YOU BEGIN. DO NOT JUMP AHEAD OF ANY STEP.
shopPOPdisplays makes no claim that these assembly instructions cover all details, conditions or variations, or that they cover all possible contingencies in connection with the assembly or installation of
this product. It is the Purchaser's responsibility to ensure that all components of this product are properly assembled and installed in accordance with these instructions. shopPOPdisplays assumes no
obligation or liability on account of any third-party recommendations, opinions or advice as to the assembly or installation of this product.
page
1
of
2
Acrylic Deluxe Podium Lectern
TOP PANEL
CENTER PANEL
VERTICAL PANEL
BOTTOM PANEL
(WITH BUMPONS)
FINISHED ASSEMBLY
(9x) FLAT HEAD SCREWS
PARTS LIST
NOTE: ALL PANELS ARE CLEAR ACRYLIC. 2 PERSON ASSEMBLY RECOMMENDED.
TOOLS REQUIRED - 1X PHILLIPS HEAD SCREWDRIVER (#3 DRIVE)

ASSEMBLY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE YOU BEGIN. DO NOT JUMP AHEAD OF ANY STEP.
shopPOPdisplays makes no claim that these assembly instructions cover all details, conditions or variations, or that they cover all possible contingencies in connection with the assembly or installation of
this product. It is the Purchaser's responsibility to ensure that all components of this product are properly assembled and installed in accordance with these instructions. shopPOPdisplays assumes no
obligation or liability on account of any third-party recommendations, opinions or advice as to the assembly or installation of this product.
page
2
of
2
Acrylic Deluxe Podium Lectern
1
2
3
U
V
DETAILED VIEW
W
DETAILED VIEW
NOTE: Follow Steps 1 - 3 in order, starting from the bottom and working your way up.
attach the bottom panel to the vertical panel
using 3x screws, noting the orientation of the
angled cut at the top of the vertical panel.
attach the center panel to the vertical panel by
inserting 3x screws into the countersunk through holes
attach the top panel to the
center panel using 3x screws
DETAILED VIEW