Shot-scope Pro l1 User manual

Rangender Care Warning

• In order to protect the coating of the lens, do not touch the lens.

• If the lens becomes dirty, please wipe gently with cleaning cloth.

• Avoid collision or heavy pressure when carrying or using the rangender,

keep away from heat or corrosion.

• Keep the product away from moisture during storage. Please keep it in a

dry, cool, ventilated place, avoiding direct sunlight, dust and temperature

shock.

• Do not stare into the laser beam.

• Do not aim directly at the sun. Eyes can be permanently damaged by

looking into the sun with this device.

• Do not aim directly at the sun with rangender. It can cause permanent

damage to components inside the device.

• Keep the rangender away from direct sunlight.

• Do not expose the device to extremely high or low temperatures.

Temperature range: -10°C to 60°C.

• If the device shows any type of damage, such as bulging, swelling or

disgurement. Discontinue use immediately and contact Shot Scope

Technologies Ltd.

• Do not attempt to disassemble, modify, re-manufacture or damage the

device. Please send to Shot Scope Technologies Ltd for repair.

• Avoid extreme shock and harsh treatment, because it can degrade the life

of the device.

• Do not spray any chemicals on the device in an attempt to clean. Only use

a damp cloth or paper towel with water to clean the device.

• Always consult your Physician/Doctor before beginning or modifying any

exercise program.

Factors affecting the distance measurement and accuracy

Laser reection:

The rangender measures the distance based on the time it takes the laser

beam to travel to the target and back. The larger the target or lighter the

surface the more accurate the measurement will be.

Inuence of glare:

The rangender applies 905nm laser, which is the same as the sunlight 905

band wavelength. If the sunlight is very bright and glaring, it can interfere

with the light returning and reduce the measurement distance.

Rain and fog:

Rain and fog can affect the laser raypath, which may cause a measurement

error. When the weather is very adverse, it may cause measurement

mistakes. Adverse weather such as rain and fog, may affect the laser ray

path. This could lead to a measurement error.

Limited Warranty and Safety Information

FOR CONSUMERS PROTECTED BY CONSUMER PROTECTION LAWS OR

REGULATIONS IN THEIR COUNTRY OF PURCHASE. THE BENEFITS CONFERRED

BY THIS LIMITED WARRANTY ARE IN ADDITION TO ALL RIGHTS CONVEYED

BY SUCH CONSUMER PROTECTION LAWS AND REGULATIONS. Shot Scope

Technologies Ltd products are warranted to be free from defects in materials,

components and workmanship through normal use. The Warranty Period begins

on the date of purchase from Shot Scope Technologies Ltd and lasts for a period

of (12) months for a new product.

If a defect in material, component or workmanship is discovered within the

Warranty Period you must notify Shot Scope Technologies Ltd in writing. In no

event shall such notications be received by Shot Scope Technologies Ltd later

than 14 days after the expiration of the Warranty Period. Shot Scope Technologies

Ltd will, at its sole option, repair or replace any materials or components that

fail in normal use. Such repairs or replacement will be made at no charge to the

customer for parts or labour, provided that the customer shall be responsible for

any shipping and transportation cost. All returns must be shipped to Shot Scope

Technologies Ltd service centre for assessment prior to repair or replacement.

Shot Scope Technologies Ltd retains the exclusive right to repair or replace (with

a new or newly-overhauled replacement product) the device or software or offer a

full refund of the purchase price at its sole discretion. SUCH REMEDY SHALL BE

YOUR SOLE AND EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY.

Contact [email protected] for a returns form and further instructions. A

copy of the original sales receipt, is required as the proof of purchase for warranty

services. The customer is responsible for all shipping and transportation costs, for

shipping details contact Shot Scope Technologies Ltd.

EXCLUSIONS AND LIMITATIONS

This limited warranty extends only to products purchased from Shot Scope

Technologies Ltd or an authorized reseller.

This warranty does not apply to: (i) cosmetic damage such as scratches and

dents; (ii) consumable parts, such as batteries, unless product damage has

occurred due to a defect in materials, component or workmanship; (iii) damage

caused by accident, abuse, water, ood, re, or other acts of nature or external

causes; (iv) damage caused by service performed by anyone who is not an

authorized service provider of Shot Scope Technologies Ltd; (v) damage to a

product that has been modied or altered without written permission of Shot

Scope Technologies Ltd; or (vi) damage to a product that has been not been

charged or powered in accordance with the charging and powering instructions

provided by Shot Scope Technologies Ltd; (vii) the product is supplied or licensed

for beta, evaluation, testing or demonstration purposes for which Shot Scope

Technologies Ltd does not charge a purchase price.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW

All software and services provided by Shot Scope Technologies Ltd, including

factory loaded software is provided “AS IS” without warranty of any kind. Without

limiting the foregoing, Shot Scope Technologies Ltd does not warrant that the

operation of the product, software or services will be error free. Shot Scope

Technologies Ltd does not warrant that any equipment, system or network that

the product software or services are used in conjunction with will be error free.

TO THE EXTENT NOT PROHIBITED BY APPLICABLE LAW

All implied warranties and conditions of merchantability, satisfactory quality or

tness for a particular purpose are limited to the duration of the warranty period.

All other express or implied conditions, representations and warranties, including

but not limited to any implied warranty of non-infringement are disclaimed.

To the extent not prohibited by applicable law, in no event will Shot Scope

Technologies Ltd be liable for; (i) lost or erased data in connection with repair

or replacement of a device; (ii) loss of revenue or prot; (iii) loss of the ability to

use third party products or services; (iv) or for special, indirect, consequential,

incidental or punitive damages, regardless of the theory of liability (including

negligence). In the event where Shot Scope Technologies Ltd has been advised

of the possibility of damages. To the extent not prohibited by applicable law, in no

event will Shot Scope Technologies Ltd liability exceed the amount paid by you the

consumer for the product.

Unless modied in writing by Shot Scope Technologies Ltd this limited warranty

is understood to be the complete and exclusive agreement between you and Shot

Scope Technologies Ltd. Superseding all prior agreements, oral or written, and all

other communications between you and Shot Scope Technologies Ltd. No Shot

Scope Technologies Ltd employee, agent or reseller is authorized to make any

verbal or written modication, extension or addition to this limited warranty.

ONLINE AUCTION PURCHASES

Products purchased through online auctions are not eligible for warranty

coverage. Online auction conrmations are not accepted for warranty verication.

To obtain warranty services, an original or copy of the sales receipt from the

original retailer is required.

TECHNICAL SUPPORT

This limited warranty is neither a service nor a support contract. Answers to

technical support questions can be found at: support.shotscope.com

Laser Rangender

User Guide

Shot Scope Technologies Ltd

Unit 27, Castlebrae Business Centre, 40 Peffer Place, Edinburgh

EH16 4BB United Kingdom

Go to www.shotscope.com/legal/ for the latest terms and conditions,

returns and privacy policies.

Laser Description

LCD Display 94% Optical Transmittance

1. Laser Sending Lens

2. Laser Receiving Lens

3. Replaceable Battery Port

4. Eyepiece

5. Focusing Ring

6. Power Button

7. Mode Button (Meter / Yard)

8. Slope Switch (On / Off)

9. Black / Red Optics Switch

Continuous Measuring Icon

Actual Distance

Mode Icon

Low Battery Indicator

Slope Value

Degree of Slope

Laser Icon

Golf Mode Indicator

Target-Lock Vibration

Sending Laser

Instructions and Settings

Eyepiece

Focus is adjustable as shown in

diagram. Rotate the ring clockwise

or counterclockwise to adjust to the

correct focus for your eyes.

1. Adjust magnications (X6)

2. Adjust the reading display to make

the reading appear clearly

Battery

Rangender requires a CR123 battery and supports approximately 5,800

measuring times. When the low battery indicator starts ashing on the

screen, it means you need to change the battery.

1. When the battery icon “ ” appears on the screen it means

the battery is low and should be replaced.

NOTICE: Dispose of the Shot Scope device, battery and

packaging in accordance with local regulations.

Do not dispose of the battery with regular household waste.

Technical Data

Measuring Distance: 875 Yards

Magnication: x6

Field of View: 122m (7° of eld of view)

Objective Lens: 25mm

Eyepiece Lens: 12mm

Exit Pupil Diameter: 3.9mm

Laser Type: 905nm, Class 1

Lens Coating: Fully Multi-Coated

Battery: CR123

Measuring Time: 0.5-1sec

Distance Measurement Accuracy: +/- 1m or 0.1%

Angle Measurement Range: +/- 45°

Net Weight: 160 Grams

Dimensions: 112 x 45 x 75 mm

Low Battery Indicator: Yes

Target-Lock: Yes

Scan Mode: Yes

Target-Lock Vibration: Yes

Water Resistant: Yes

Shot Scope PRO L1 Rangender includes:

1 x Shot Scope PRO L1 Rangender

1 x Lanyard

1 x Carry Clip

1 x Premium Carrying Case

1 x Cleaning Cloth

1 x CR123 Battery

Adaptive Slope Technology

Adaptive Slope technology provides the golfer with compensated distance

based on hole’s uphill or downhill. For example: A 156.8 yards uphill shot of

7 degree really plays at 176.8 yards, without slope correction distance

function, you would come up 20 yards short (applicable to M2).

Mode Change

Press the “M” button to change measuring mode between following modes:

Customize the optical display in either Red or Black, ensures the golfer can

read the display clearly in all settings. To change between Red and Black,

use the switch on the right side of the laser.

Continuous Scan Mode

Hold down “Power” button while ranging, the data on the LCD screen

will change as you move.

Changing Units

Press “ M ” button for 3 seconds to change units between Meters or Yards.

Power ON/OFF

1. Press Power button “ ” for a second to power on the rangender.

2. Rangender will power off automatically after 10 seconds of inactivity.

Continuous Scan Mode

Golf Mode

Slope + Target-Lock Vibration

+ Angle

Speed Mode

Default unit: km/h

Modes

Red / Black Dual Optics

Laser Description

LCD Display 94% Optical Transmittance

1. Laser Sending Lens

2. Laser Receiving Lens

3. Replaceable Battery Port

4. Eyepiece

5. Focusing Ring

6. Power Button

7. Mode Button (Meter / Yard)

8. Slope Switch (On / Off)

9. Black / Red Optics Switch

Continuous Measuring Icon

Actual Distance

Mode Icon

Low Battery Indicator

Slope Value

Degree of Slope

Laser Icon

Golf Mode Indicator

Target-Lock Vibration

Sending Laser

Instructions and Settings

Eyepiece

Focus is adjustable as shown in

diagram. Rotate the ring clockwise

or counterclockwise to adjust to the

correct focus for your eyes.

1. Adjust magnications (X6)

2. Adjust the reading display to make

the reading appear clearly

Battery

Rangender requires a CR123 battery and supports approximately 5,800

measuring times. When the low battery indicator starts ashing on the

screen, it means you need to change the battery.

1. When the battery icon “ ” appears on the screen it means

the battery is low and should be replaced.

NOTICE: Dispose of the Shot Scope device, battery and

packaging in accordance with local regulations.

Do not dispose of the battery with regular household waste.

Technical Data

Measuring Distance: 875 Yards

Magnication: x6

Field of View: 122m (7° of eld of view)

Objective Lens: 25mm

Eyepiece Lens: 12mm

Exit Pupil Diameter: 3.9mm

Laser Type: 905nm, Class 1

Lens Coating: Fully Multi-Coated

Battery: CR123

Measuring Time: 0.5-1sec

Distance Measurement Accuracy: +/- 1m or 0.1%

Angle Measurement Range: +/- 45°

Net Weight: 160 Grams

Dimensions: 112 x 45 x 75 mm

Low Battery Indicator: Yes

Target-Lock: Yes

Scan Mode: Yes

Target-Lock Vibration: Yes

Water Resistant: Yes

Shot Scope PRO L1 Rangender includes:

1 x Shot Scope PRO L1 Rangender

1 x Lanyard

1 x Carry Clip

1 x Premium Carrying Case

1 x Cleaning Cloth

1 x CR123 Battery

Adaptive Slope Technology

Adaptive Slope technology provides the golfer with compensated distance

based on hole’s uphill or downhill. For example: A 156.8 yards uphill shot of

7 degree really plays at 176.8 yards, without slope correction distance

function, you would come up 20 yards short (applicable to M2).

Mode Change

Press the “M” button to change measuring mode between following modes:

Customize the optical display in either Red or Black, ensures the golfer can

read the display clearly in all settings. To change between Red and Black,

use the switch on the right side of the laser.

Continuous Scan Mode

Hold down “Power” button while ranging, the data on the LCD screen

will change as you move.

Changing Units

Press “ M ” button for 3 seconds to change units between Meters or Yards.

Power ON/OFF

1. Press Power button “ ” for a second to power on the rangender.

2. Rangender will power off automatically after 10 seconds of inactivity.

Continuous Scan Mode

Golf Mode

Slope + Target-Lock Vibration

+ Angle

Speed Mode

Default unit: km/h

Modes

Red / Black Dual Optics

Laser Description

LCD Display 94% Optical Transmittance

1. Laser Sending Lens

2. Laser Receiving Lens

3. Replaceable Battery Port

4. Eyepiece

5. Focusing Ring

6. Power Button

7. Mode Button (Meter / Yard)

8. Slope Switch (On / Off)

9. Black / Red Optics Switch

Continuous Measuring Icon

Actual Distance

Mode Icon

Low Battery Indicator

Slope Value

Degree of Slope

Laser Icon

Golf Mode Indicator

Target-Lock Vibration

Sending Laser

Instructions and Settings

Eyepiece

Focus is adjustable as shown in

diagram. Rotate the ring clockwise

or counterclockwise to adjust to the

correct focus for your eyes.

1. Adjust magnications (X6)

2. Adjust the reading display to make

the reading appear clearly

Battery

Rangender requires a CR123 battery and supports approximately 5,800

measuring times. When the low battery indicator starts ashing on the

screen, it means you need to change the battery.

1. When the battery icon “ ” appears on the screen it means

the battery is low and should be replaced.

NOTICE: Dispose of the Shot Scope device, battery and

packaging in accordance with local regulations.

Do not dispose of the battery with regular household waste.

Technical Data

Measuring Distance: 875 Yards

Magnication: x6

Field of View: 122m (7° of eld of view)

Objective Lens: 25mm

Eyepiece Lens: 12mm

Exit Pupil Diameter: 3.9mm

Laser Type: 905nm, Class 1

Lens Coating: Fully Multi-Coated

Battery: CR123

Measuring Time: 0.5-1sec

Distance Measurement Accuracy: +/- 1m or 0.1%

Angle Measurement Range: +/- 45°

Net Weight: 160 Grams

Dimensions: 112 x 45 x 75 mm

Low Battery Indicator: Yes

Target-Lock: Yes

Scan Mode: Yes

Target-Lock Vibration: Yes

Water Resistant: Yes

Shot Scope PRO L1 Rangender includes:

1 x Shot Scope PRO L1 Rangender

1 x Lanyard

1 x Carry Clip

1 x Premium Carrying Case

1 x Cleaning Cloth

1 x CR123 Battery

Adaptive Slope Technology

Adaptive Slope technology provides the golfer with compensated distance

based on hole’s uphill or downhill. For example: A 156.8 yards uphill shot of

7 degree really plays at 176.8 yards, without slope correction distance

function, you would come up 20 yards short (applicable to M2).

Mode Change

Press the “M” button to change measuring mode between following modes:

Customize the optical display in either Red or Black, ensures the golfer can

read the display clearly in all settings. To change between Red and Black,

use the switch on the right side of the laser.

Continuous Scan Mode

Hold down “Power” button while ranging, the data on the LCD screen

will change as you move.

Changing Units

Press “ M ” button for 3 seconds to change units between Meters or Yards.

Power ON/OFF

1. Press Power button “ ” for a second to power on the rangender.

2. Rangender will power off automatically after 10 seconds of inactivity.

Continuous Scan Mode

Golf Mode

Slope + Target-Lock Vibration

+ Angle

Speed Mode

Default unit: km/h

Modes

Red / Black Dual Optics

Laser Description

LCD Display 94% Optical Transmittance

1. Laser Sending Lens

2. Laser Receiving Lens

3. Replaceable Battery Port

4. Eyepiece

5. Focusing Ring

6. Power Button

7. Mode Button (Meter / Yard)

8. Slope Switch (On / Off)

9. Black / Red Optics Switch

Continuous Measuring Icon

Actual Distance

Mode Icon

Low Battery Indicator

Slope Value

Degree of Slope

Laser Icon

Golf Mode Indicator

Target-Lock Vibration

Sending Laser

Instructions and Settings

Eyepiece

Focus is adjustable as shown in

diagram. Rotate the ring clockwise

or counterclockwise to adjust to the

correct focus for your eyes.

1. Adjust magnications (X6)

2. Adjust the reading display to make

the reading appear clearly

Battery

Rangender requires a CR123 battery and supports approximately 5,800

measuring times. When the low battery indicator starts ashing on the

screen, it means you need to change the battery.

1. When the battery icon “ ” appears on the screen it means

the battery is low and should be replaced.

NOTICE: Dispose of the Shot Scope device, battery and

packaging in accordance with local regulations.

Do not dispose of the battery with regular household waste.

Technical Data

Measuring Distance: 875 Yards

Magnication: x6

Field of View: 122m (7° of eld of view)

Objective Lens: 25mm

Eyepiece Lens: 12mm

Exit Pupil Diameter: 3.9mm

Laser Type: 905nm, Class 1

Lens Coating: Fully Multi-Coated

Battery: CR123

Measuring Time: 0.5-1sec

Distance Measurement Accuracy: +/- 1m or 0.1%

Angle Measurement Range: +/- 45°

Net Weight: 160 Grams

Dimensions: 112 x 45 x 75 mm

Low Battery Indicator: Yes

Target-Lock: Yes

Scan Mode: Yes

Target-Lock Vibration: Yes

Water Resistant: Yes

Shot Scope PRO L1 Rangender includes:

1 x Shot Scope PRO L1 Rangender

1 x Lanyard

1 x Carry Clip

1 x Premium Carrying Case

1 x Cleaning Cloth

1 x CR123 Battery

Adaptive Slope Technology

Adaptive Slope technology provides the golfer with compensated distance

based on hole’s uphill or downhill. For example: A 156.8 yards uphill shot of

7 degree really plays at 176.8 yards, without slope correction distance

function, you would come up 20 yards short (applicable to M2).

Mode Change

Press the “M” button to change measuring mode between following modes:

Customize the optical display in either Red or Black, ensures the golfer can

read the display clearly in all settings. To change between Red and Black,

use the switch on the right side of the laser.

Continuous Scan Mode

Hold down “Power” button while ranging, the data on the LCD screen

will change as you move.

Changing Units

Press “ M ” button for 3 seconds to change units between Meters or Yards.

Power ON/OFF

1. Press Power button “ ” for a second to power on the rangender.

2. Rangender will power off automatically after 10 seconds of inactivity.

Continuous Scan Mode

Golf Mode

Slope + Target-Lock Vibration

+ Angle

Speed Mode

Default unit: km/h

Modes

Red / Black Dual Optics

Laser Description

LCD Display 94% Optical Transmittance

1. Laser Sending Lens

2. Laser Receiving Lens

3. Replaceable Battery Port

4. Eyepiece

5. Focusing Ring

6. Power Button

7. Mode Button (Meter / Yard)

8. Slope Switch (On / Off)

9. Black / Red Optics Switch

Continuous Measuring Icon

Actual Distance

Mode Icon

Low Battery Indicator

Slope Value

Degree of Slope

Laser Icon

Golf Mode Indicator

Target-Lock Vibration

Sending Laser

Instructions and Settings

Eyepiece

Focus is adjustable as shown in

diagram. Rotate the ring clockwise

or counterclockwise to adjust to the

correct focus for your eyes.

1. Adjust magnications (X6)

2. Adjust the reading display to make

the reading appear clearly

Battery

Rangender requires a CR123 battery and supports approximately 5,800

measuring times. When the low battery indicator starts ashing on the

screen, it means you need to change the battery.

1. When the battery icon “ ” appears on the screen it means

the battery is low and should be replaced.

NOTICE: Dispose of the Shot Scope device, battery and

packaging in accordance with local regulations.

Do not dispose of the battery with regular household waste.

Technical Data

Measuring Distance: 875 Yards

Magnication: x6

Field of View: 122m (7° of eld of view)

Objective Lens: 25mm

Eyepiece Lens: 12mm

Exit Pupil Diameter: 3.9mm

Laser Type: 905nm, Class 1

Lens Coating: Fully Multi-Coated

Battery: CR123

Measuring Time: 0.5-1sec

Distance Measurement Accuracy: +/- 1m or 0.1%

Angle Measurement Range: +/- 45°

Net Weight: 160 Grams

Dimensions: 112 x 45 x 75 mm

Low Battery Indicator: Yes

Target-Lock: Yes

Scan Mode: Yes

Target-Lock Vibration: Yes

Water Resistant: Yes

Shot Scope PRO L1 Rangender includes:

1 x Shot Scope PRO L1 Rangender

1 x Lanyard

1 x Carry Clip

1 x Premium Carrying Case

1 x Cleaning Cloth

1 x CR123 Battery

Adaptive Slope Technology

Adaptive Slope technology provides the golfer with compensated distance

based on hole’s uphill or downhill. For example: A 156.8 yards uphill shot of

7 degree really plays at 176.8 yards, without slope correction distance

function, you would come up 20 yards short (applicable to M2).

Mode Change

Press the “M” button to change measuring mode between following modes:

Customize the optical display in either Red or Black, ensures the golfer can

read the display clearly in all settings. To change between Red and Black,

use the switch on the right side of the laser.

Continuous Scan Mode

Hold down “Power” button while ranging, the data on the LCD screen

will change as you move.

Changing Units

Press “ M ” button for 3 seconds to change units between Meters or Yards.

Power ON/OFF

1. Press Power button “ ” for a second to power on the rangender.

2. Rangender will power off automatically after 10 seconds of inactivity.

Continuous Scan Mode

Golf Mode

Slope + Target-Lock Vibration

+ Angle

Speed Mode

Default unit: km/h

Modes

Red / Black Dual Optics